Whirlpool RF265LXTB Installation Instructions

Whirlpool RF265LXTB Manual

Whirlpool RF265LXTB manual content summary:

  • Whirlpool RF265LXTB | Installation Instructions - Page 1
    30" (76 CM) FREESTANDING ELECTRIC RANGES Table of Contents RANGE SAFETY 1 INSTALLATION REQUIREMENTS 2 Tools and Parts 2 Location Requirements 2 Electrical Requirements 3 INSTALLATION INSTRUCTIONS 4 Unpack Range 4 Install Anti-Tip Bracket 5 Electrical Connection 6 Verify Anti-Tip
  • Whirlpool RF265LXTB | Installation Instructions - Page 2
    and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. ■ Cabinet opening dimensions that are shown must be used. Given dimensions
  • Whirlpool RF265LXTB | Installation Instructions - Page 3
    dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions or service technician
  • Whirlpool RF265LXTB | Installation Instructions - Page 4
    Dimensions" section of the "Location Requirements" section. ■ This range range can be moved if servicing is INSTRUCTIONS WARNING Unpack Range range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and protective film from range. Remove oven racks and parts
  • Whirlpool RF265LXTB | Installation Instructions - Page 5
    with screws provided. Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. Contact
  • Whirlpool RF265LXTB | Installation Instructions - Page 6
    can result in death, fire, or electrical shock. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Disconnect power. 2. Remove the
  • Whirlpool RF265LXTB | Installation Instructions - Page 7
    . Bend the ground-link away from the range so that it does not contact the range. A. Removable retaining nut B. Strain relief ■ Tighten strain relief screw against the flexible conduit. 4. Complete installation following instructions for your type of electrical connection: 4-wire (recommended
  • Whirlpool RF265LXTB | Installation Instructions - Page 8
    C. Hex washer head screw D. Silver-colored terminal block screw E. Neutral (center) wire F. Line 2 G. UL listed strain relief and 40- or 50-amp range power supply cord 3. Connect the other 2 wires (lines 1 and 2) to the outer terminal screws on the terminal block. 4. Tighten strain relief screws
  • Whirlpool RF265LXTB | Installation Instructions - Page 9
    to first stop position. Lift front of drawer to clear white wheels in drawer guides. Remove drawer and set it aside on a protected surface. 2. Making sure the for the anti-tip bracket securely attached to floor. ■ Slide range back so rear range foot is under anti-tip bracket. A. Line 1 B. Ground-
  • Whirlpool RF265LXTB | Installation Instructions - Page 10
    the Use and Care Guide for specific instruction on range operation. If range does not operate, check the following: ■ Household fuse is intact and tight; or circuit breaker has not tripped. ■ Range is plugged into an outlet. ■ Electrical supply is connected. ■ See "Troubleshooting" in the Use and
  • Whirlpool RF265LXTB | Installation Instructions - Page 11
    Left edge ANTI-TIP BRACKET TEMPLATE Cut on dotted lines and place the left edge against the left side cabinet and the top edge against the rear wall. Top edge 11
  • Whirlpool RF265LXTB | Installation Instructions - Page 12
    W10141166A © 2007. All rights reserved. 7/07 Printed in U.S.A.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

INSTALLATION INSTRUCTIONS
30" (76 CM) FREESTANDING ELECTRIC RANGES
RANGE SAFETY
Table of Contents
RANGE SAFETY
.............................................................................
1
INSTALLATION REQUIREMENTS
................................................
2
Tools and Parts
............................................................................
2
Location Requirements
................................................................
2
Electrical Requirements
...............................................................
3
INSTALLATION INSTRUCTIONS
..................................................
4
Unpack Range
.............................................................................
4
Install Anti-Tip Bracket
.................................................................
5
Electrical Connection
...................................................................
6
Verify Anti-Tip Bracket Location
..................................................
9
Level Range
..................................................................................
9
Complete Installation
.................................................................
10
Moving the Range
......................................................................
10
ANTI-TIP BRACKET TEMPLATE
...............................................
11
IMPORTANT:
Save for local electrical inspector's use.
W10141166A
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death or serious burns to children and adults.