Whirlpool RF265LXTQ Installation Instructions
Whirlpool RF265LXTQ Manual
 |
View all Whirlpool RF265LXTQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool RF265LXTQ manual content summary:
- Whirlpool RF265LXTQ | Installation Instructions - Page 1
30" (76 CM) FREESTANDING ELECTRIC RANGES Table of Contents RANGE SAFETY 1 INSTALLATION REQUIREMENTS 2 Tools and Parts 2 Location Requirements 2 Electrical Requirements 3 INSTALLATION INSTRUCTIONS 4 Unpack Range 4 Install Anti-Tip Bracket 5 Electrical Connection - U.S.A. Only 6 Verify Anti - Whirlpool RF265LXTQ | Installation Instructions - Page 2
all parts are included. A B s Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances. s The floor anti-tip bracket must be installed. To install the antitip bracket shipped with the range, see "Install Anti-Tip Bracket" section. s Grounded electrical supply - Whirlpool RF265LXTQ | Installation Instructions - Page 3
electric shock. Check with a qualified electrician or service technician electrical connection you will be using and follow the instructions provided for it here. s Range must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model - Whirlpool RF265LXTQ | Installation Instructions - Page 4
range is manufactured with the ground connected to the cabinet. The ground must be revised so the green ground wire of the 4-wire power supply cord is connected to the cabinet. See "Electrical INSTRUCTIONS Unpack Range WARNING Excessive Weight Hazard 3. On Ranges range. Remove oven racks and parts - Whirlpool RF265LXTQ | Installation Instructions - Page 5
range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. Failure to follow these instructions hardboard from under range. 9. Make electrical connections as described in the "Electrical Connection" section. 10. Move range into its final - Whirlpool RF265LXTQ | Installation Instructions - Page 6
grounded outlet. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or - Whirlpool RF265LXTQ | Installation Instructions - Page 7
the ground-link away from the range so that it does not contact the range. A. Removable retaining nut B. Strain relief s Tighten strain relief screw against the flexible conduit. 4. Complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if - Whirlpool RF265LXTQ | Installation Instructions - Page 8
screws. 5. Replace terminal block cover. Direct Wire Installation: Copper or Aluminum Wire This range may be connected directly to the fuse disconnect or circuit breaker box. Depending on your electrical supply, make the required 3-wire or 4-wire connection. 1. Strip outer covering back 3" (7.6 cm - Whirlpool RF265LXTQ | Installation Instructions - Page 9
of drawer to clear white wheels in drawer guides. Remove drawer and set it aside on a to floor. s Slide range back so rear range foot is under anti-tip electrical connection. 4. Tighten the locking ring of the conduit connector. 5. Replace the terminal block cover. If range is not level, pull range - Whirlpool RF265LXTQ | Installation Instructions - Page 10
the Use and Care Guide for specific instruction on range operation. If range does not operate, check the following: s Household fuse is intact and tight; or circuit breaker has not tripped. s Range is plugged into an outlet. s Electrical supply is connected. s See "Troubleshooting" in the Use and - Whirlpool RF265LXTQ | Installation Instructions - Page 11
Left edge ANTI-TIP BRACKET TEMPLATE Cut on dotted lines and place the left edge against the left side cabinet and the top edge against the rear wall. Top edge 11 - Whirlpool RF265LXTQ | Installation Instructions - Page 12
9762996A © 2006. All rights reserved. 8/06 Printed in U.S.A.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
INSTALLATION INSTRUCTIONS
30" (76 CM) FREESTANDING ELECTRIC RANGES
RANGE SAFETY
IMPORTANT:
Save installation instructions for local electrical inspector's use.
9762996A
Table of Contents
RANGE SAFETY
..............................................................................
1
INSTALLATION REQUIREMENTS
................................................
2
Tools and Parts
............................................................................
2
Location Requirements
................................................................
2
Electrical Requirements
...............................................................
3
INSTALLATION INSTRUCTIONS
..................................................
4
Unpack Range
..............................................................................
4
Install Anti-Tip Bracket
.................................................................
5
Electrical Connection - U.S.A. Only
.............................................
6
Verify Anti-Tip Bracket Location
..................................................
9
Level Range
..................................................................................
9
Complete Installation
..................................................................
10
Moving the Range
......................................................................
10
ANTI-TIP BRACKET TEMPLATE
...............................................
11
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death or serious burns to children and adults.