Whirlpool RS675PXGB Installation Instructions
Whirlpool RS675PXGB Manual
 |
View all Whirlpool RS675PXGB manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool RS675PXGB manual content summary:
- Whirlpool RS675PXGB | Installation Instructions - Page 1
INSTRUCTIONS 5 Prepare Drop-In Range 5 Remove Oven Trim 5 Make Electrical Connection 6 Install Range 7 Complete Installation 8 RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance - Whirlpool RS675PXGB | Installation Instructions - Page 2
range. • Look for screws securely attached to cabinet. • Replace side trim. INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions opening dimensions that are shown must be used. Given dimensions are minimum - Whirlpool RS675PXGB | Installation Instructions - Page 3
cooktop to support slats B. 28³⁄₈" (72.1 cm) cooktop recessed width C. 28 71.2 cm) range recessed width D. 24 58.4 cm) to back of range Cabinet Dimensions Top view range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions - Whirlpool RS675PXGB | Installation Instructions - Page 4
follow the instructions provided for it here. ■ Range must be fuse or circuit breaker is recommended. ■ Flexible cable from appliance should be connected directly to the junction box. ■ Fuse the conduit. The length of conduit provided is for serviceability of the oven. ■ A UL listed or CSA - Whirlpool RS675PXGB | Installation Instructions - Page 5
INSTALLATION INSTRUCTIONS Prepare Drop-In Range 1. Decide on the final location for the range. Locate existing wiring to literature. 5. Remove and set aside racks and other parts from inside the oven. 6. Move range and cardboard close to the range's final location. Remove Oven Trim IMPORTANT: Use - Whirlpool RS675PXGB | Installation Instructions - Page 6
from Home Power Supply Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge solid copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. This range is manufactured with a neutral (white) power supply wire and - Whirlpool RS675PXGB | Installation Instructions - Page 7
cabinet cutout. WARNING Tip Over Hazard A child or adult can tip the range and be killed. Securely attach mounting screws to cabinet. Reattach mounting screws if the range is moved. Failure to follow these instructions can result in death or serious burns to children and adults. 5. Securely fasten - Whirlpool RS675PXGB | Installation Instructions - Page 8
. ■ Electrical supply is connected. ■ See "Troubleshooting" section in the Use and Care Guide. 4. When oven has been on for 5 Service: Please reference the "Assistance or Service" section of the Use and Care Guide or contact the dealer from whom you purchased your range. W10044940 © 2007.Whirlpool
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
INSTALLATION INSTRUCTIONS
30" (76.2 CM) ELECTRIC DROP-IN RANGES
RANGE SAFETY
Table of Contents
RANGE SAFETY
...............................................
2
INSTALLATION REQUIREMENTS
..................
2
Tools and Parts
.............................................
2
Location Requirements
.................................
2
Electrical Requirements
................................
4
Countertop Preparation
.................................
4
INSTALLATION INSTRUCTIONS
....................
5
Prepare Drop-In Range
.................................
5
Remove Oven Trim
........................................
5
Make Electrical Connection
..........................
6
Install Range
..................................................
7
Complete Installation
.....................................
8
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT:
Save for local electrical inspector's use.
W10044940