Whirlpool WED5010LW Quick Start Guide

OPERATING INSTRUCTIONS

WARNING:

To reduce the risk of ﬁre, electric shock, or injury to persons, read

the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s

Owner’s Manual, before operating this appliance.

QUICK START GUIDE

*Not all features, cycles, and options are available on all models. Appearance may vary.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in

death, explosion, or fire.

WHIRLPOOL

®

DRYER

STEP 1. CLEAN LINT SCREEN

STEP 2. LOAD CLOTHES

STEP 3. PRESS POWER

BUTTON

STEP 4. SELECT THE

DESIRED CYCLE FOR YOUR LOAD*

STEP 5. ADJUST CYCLE

SETTINGS AND OPTIONS, IF

DESIRED

STEP 6. PRESS, HOLD, AND

RELEASE START BUTTON

NOTE:

Start button must be held for

1 second to start cycle. Once the

status lights are illuminated, release the

start button.

1

3

4

2

CONTROL

PANEL AND FEATURES

1

POWER

Press to turn on/off or to stop/cancel a cycle.

2

CYCLE KNOB

Turn knob to select desired cycle.

NOTE:

Your dryer comes with two types of cycles - Sensor drying

cycles and Timed drying cycles.

SENSOR DRYING CYCLES:

Use Sensor Cycles for better fabric care and energy savings.

The dryer senses moisture in the load or air temperature and

shuts off when the load reaches the selected dryness level.

Note that you cannot adjust the time with these cycles.

TIMED DRYING CYCLES:

In these cycles, you can specify the drying time. Time options

available are 15, 30, 60 and 90 minutes. For a complete list of

all cycles, please refer to the cycle guide document.

3

START/PAUSE

Press and hold the Start/Pause button for 1 second until all

status lights are illuminated, then release to start cycle. Press during

a cycle to pause cycle.

4

CYCLE MODIFIERS

(Not all modiﬁers are available on all cycles)

TEMP

Press to modify the cycle’s available temperature. (Extra Low, Low,

Medium, and High)

TIME

(Air Only, Timed Dry, and Quick Dry Only)

Press to modify the time for the timed cycle between 15, 30, 60,

and 90 minutes.

OPTIONS

Press to add or remove options for each cycle. Press once to

activate Wrinkle Shield, twice to activate Static Reduce and three

times for both.

WRINKLE SHIELD

If you will be unable to remove a load immediately, activate

this option to add 150 minutes of periodic tumbling to help

reduce wrinkles from forming after the cycle completes.

STATIC REDUCE

This option can help reduce the build up of static cling formed

during the drying process. When activated, this option will

tumble with steam towards the end of the cycle to reduce

static.

MUTE CYCLE SIGNAL

Use this option to turn the end of drying cycle signal on or off.

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the “Owner’s Manual” included

with your machine.

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be

dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in

death or fire.

A cycle guide for your dryer can be

found online at

www.whirlpool.com

. The

document will help identify which

cycle to choose for various load

types as well as the default cycle

options. For example we recommend

using the NORMAL cycle with

Medium temperature for cottons,

linens and mixed-garment loads.

CHOOSING THE RIGHT CYCLE

SPECIALITY CYCLE

WRINKLE CONTROL:

This cycle is designed to help remove or reduce wrinkles, this cycle is

great for permanent press clothing. The dryer cycle uses low heat and

a cool down period to keep clothes from wrinkling or creasing.

STEAM REFRESH:

This cycle is best for reducing wrinkles and odors from dry items. This

cycle is great to refresh a wrinkled garment or when a load was left in

the dryer too long.

*Not all cycles, settings or options are available with all models.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

For information on any of the following items, a full cycle guide, detailed product dimensions, or for complete instructions for use and installation,

please visit

www.whirlpool.com/owners

, or in Canada

www.whirlpool.ca/owners

. This may save you the cost of a service call.

Register

Product

Schedule Service

How To’s &

FAQ

Manuals &

Downloads

Add Service

Plan

Parts

Accessories

To speak with a customer service representative or if you have additional questions, call us toll free at

1-866-698-2538

or in Canada call

1-800-807-6777

.

You can write with any questions or concerns at:

Whirlpool Brand Appliances

Customer eXperience Center

533 Benson Road

Benton Harbor, MI 49022-2692

Whirlpool Brand Appliances

Customer eXperience Center

Unit 200-6750 Century Ave

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Model &

Serial

Number

Tag Location

Whirlpool WED5010LW Quick Start Guide

Whirlpool WED5010LW Manual

Whirlpool WED5010LW manual content summary: