Whirlpool WED70HEBW Dimension Guide
Whirlpool WED70HEBW Manual
 |
View all Whirlpool WED70HEBW manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WED70HEBW manual content summary:
- Whirlpool WED70HEBW | Dimension Guide - Page 1
The dimensions shown below are the recommended spacing for this dryer. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, floor moldings, and dryer venting. ■■ Additional spacing of 1" (25 mm) on all sides of - Whirlpool WED70HEBW | Dimension Guide - Page 2
than those specified will: ■■ Shorten life of dryer. ■■ Reduce performance, resulting in longer drying times and increased energy usage. The Vent System Chart provides venting requirements that will help achieve best drying performance. Whirlpool Vent System Chart Number of 90° elbows Type
-
1 -
2
 |
 |
Electric Dryer
PRODUCT MODEL NUMBERS
Front view:
Side view:
Back view:
Recommended Installation Spacing:
Installation spacing for recessed area or closet installation
The dimensions shown below are the recommended spacing for this dryer.
■
Additional spacing should be considered for ease of installation and servicing.
■
Additional clearances might be required for wall, door, floor moldings, and dryer venting.
■
Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors
with equivalent ventilation openings are acceptable. Companion appliance spacing should also be considered.
W10558997
01/2013
WED70HEB, WED80HEB, WED86HEB,
WED88HEA, WED94HEA, WED96HEA
27"
(686 mm)
3
/
4
"*
(18 mm)
38
1
/
8
"
(968 mm)
6
1
/
2
"
(165 mm)
29
7
/
8
"*
(759 mm)
3
1
/
2
"*
(89 mm)
6
1
/
8
"*
(156 mm)
14
3
/
8
"
(365 mm)
3
/
4
"*
(18 mm)
* Approx. measurement.
NOTE:
Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
“Venting Requirements”.
18" min.
(457 mm)
1"
(25 mm)
5"
(127 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
Power supply
Cord/cable
Water inlet
(Steam models only)
Vent