Whirlpool WED8500BW Dimension Guide
Whirlpool WED8500BW Manual
 |
View all Whirlpool WED8500BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WED8500BW manual content summary:
- Whirlpool WED8500BW | Dimension Guide - Page 1
DRYER DIMENSIONS Models with riser Electric Dryer PRODUCT MODEL NUMBERS WED8000B, WED8100B, WED8500B, WED8900B Models without riser Side view Bottom view: Back view Side view Back view NOTE: Most installations require a minimum of 5" (127 mm) clearance behind dryer and servicing. ■■ the dryer to - Whirlpool WED8500BW | Dimension Guide - Page 2
Vent System Chart. Exhaust systems longer than those specified will: ■■ Shorten life of dryer. ■■ Reduce performance, resulting in longer drying times and increased energy usage. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to
-
1 -
2
 |
 |
Electric Dryer
PRODUCT MODEL NUMBERS
W10562335B
08/2013
WED8000B, WED8100B,
WED8500B, WED8900B
Back view
Side view
Models with riser
DRYER DIMENSIONS
Models without riser
Back view
Side view
Bottom view:
NOTE:
Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See “Venting
Requirements.”
All dimensions show recommended spacing allowed,
with tested spacing of 0" (0 mm) clearance on sides
and rear.
■
Additional spacing should be considered for ease
of installation and servicing.
■
Additional clearances might be required for wall,
door, and floor moldings.
■
Additional spacing should be considered on all
sides of the dryer to reduce noise transfer.
■
For closet installation, with a door, minimum
ventilation openings in the top and bottom of the
door are required. Louvered doors with equivalent
ventilitation openings are acceptable.
■
Companion appliance spacing should also be
considered.
Spacing for recessed area or closet installation