Whirlpool WED86HEBW Dimension Guide
Whirlpool WED86HEBW Manual
 |
View all Whirlpool WED86HEBW manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WED86HEBW manual content summary:
- Whirlpool WED86HEBW | Dimension Guide - Page 1
The dimensions shown below are the recommended spacing for this dryer. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, floor moldings, and dryer venting. ■■ Additional spacing of 1" (25 mm) on all sides of - Whirlpool WED86HEBW | Dimension Guide - Page 2
metal 27 ft. (8.2 m) 21 ft. (6.4 m) NOTE: Bottom exhaust installations have a 90º turn inside the dryer. To determine maximum exhaust length, add one 90º turn to the chart. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change
-
1 -
2
 |
 |
Electric Dryer
PRODUCT MODEL NUMBERS
Front view:
Side view:
Back view:
Recommended Installation Spacing:
Installation spacing for recessed area or closet installation
The dimensions shown below are the recommended spacing for this dryer.
■
Additional spacing should be considered for ease of installation and servicing.
■
Additional clearances might be required for wall, door, floor moldings, and dryer venting.
■
Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors
with equivalent ventilation openings are acceptable. Companion appliance spacing should also be considered.
W10558997
01/2013
WED70HEB, WED80HEB, WED86HEB,
WED88HEA, WED94HEA, WED96HEA
27"
(686 mm)
3
/
4
"*
(18 mm)
38
1
/
8
"
(968 mm)
6
1
/
2
"
(165 mm)
29
7
/
8
"*
(759 mm)
3
1
/
2
"*
(89 mm)
6
1
/
8
"*
(156 mm)
14
3
/
8
"
(365 mm)
3
/
4
"*
(18 mm)
* Approx. measurement.
NOTE:
Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
“Venting Requirements”.
18" min.
(457 mm)
1"
(25 mm)
5"
(127 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
Power supply
Cord/cable
Water inlet
(Steam models only)
Vent