Whirlpool WEE760H0DS Dimension Guide
Whirlpool WEE760H0DS Manual
 |
View all Whirlpool WEE760H0DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WEE760H0DS manual content summary:
- Whirlpool WEE760H0DS | Dimension Guide - Page 1
Electric Range PRODUCT MODEL NUMBERS WEC530H0D WEE730H0D WEE760H0D Electrical instructions in the "Level Range" section. Using the cooktop as a reference for leveling the range is not recommended. **Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs. Because Whirlpool - Whirlpool WEE760H0DS | Dimension Guide - Page 2
range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. Range uncovered wood or metal cabinet. Because Whirlpool Corporation policy includes a continuous commitment
-
1 -
2
 |
 |
30" (76.2 cm) Freestanding Electric Range
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
WEC530H0D
WEE730H0D
WEE760H0D
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Electrical:
If codes permit and a separate ground wire is used, it is
recommended that a qualified electrical installer determine that the ground
path and wire gauge are in accordance with local codes.
Do not use an extension cord.
To properly install your range, you must determine the type of electrical
connection you will be using and follow the instructions provided for it
here.
●
Range must be connected to the proper electrical voltage and frequency
as specified on the model/serial number rating plate. The model/serial
rating plate is located behind the oven door on the top right-hand side of
the oven frame.
●
This range is manufactured with the neutral terminal connected to the
cabinet. Use a 3-wire, UL listed, 40- or 50-amp power supply cord
(pigtail) (see following Range Rating chart). If local codes do not permit
ground through the neutral, use a 4-wire power supply cord rated at
250 volts, 40 or 50 amps and investigated for use with ranges.
Range Rating*
Specified Rating of
Power Supply Cord Kit
and Circuit Protection
120/240 Volts
120/208 Volts
Amps
8.8 - 16.5 KW
7.8 - 12.5 KW
40 or 50**
16.6 - 22.5 KW
12.6 - 18.5 KW
50
*The NEC calculated load is less than the total connected load listed on
the model/serial rating plate.
**If connecting to a 50-amp circuit, use a 50-amp rated cord with
kit. For 50-amp rated cord kits, use kits that specify use with a
nominal 1
³⁄₈
" (34.9 mm) diameter connection opening.
●
A circuit breaker is recommended.
Ref. W10665255B
9/30/14
A. 1
³⁄₁₆
" (3.0 cm) height from
cooktop to top of vent
B. 29
⁷⁄₈
" (75.9 cm)
C. Model/serial number plate
(located behind the oven door on
the top right-hand side of the
oven frame)
D. 36" (91.4 cm) height to top of
cooktop edge with leveling legs
screwed all the way in*
E. 28
⁵⁄₁₆
" (71.9 cm) max. depth
from front of console to
back of range.
F. 28
⁷⁄₈
" (73.3 cm) max. depth
from handle to back of
range.
B
D
A
F
E
C
IMPORTANT:
Range must be level after installation. Follow the instructions
in the “Level Range” section. Using the cooktop as a reference for leveling
the range is not recommended.
*
*
Range can be raised approximately 1" (2.5 cm) by adjusting the leveling
legs.
This manual covers several models. Your model may appear different from
the models depicted. Dimensions given are maximum dimensions across all
models.
Page 1 of 2