Whirlpool WFW86HEBW Dimension Guide

Whirlpool WFW86HEBW Manual

Whirlpool WFW86HEBW manual content summary:

  • Whirlpool WFW86HEBW | Dimension Guide - Page 1
    Washer PRODUCT MODEL NUMBERS WFW94HEA, WFW96HEA, WFW88HEA, WFW70HEB, WFW80HEB, WFW86HEB, WFW8640B Undercounter installation washer only: Recessed area or closet installation (washer or closet installation - stacked washer and dryer 6" (152 mm) servicing, and spacing for companion appliances
  • Whirlpool WFW86HEBW | Dimension Guide - Page 2
    Top of laundry tub must be at least 30" (762 mm) above floor; install no higher than 96" (2.44 m) from bottom of washer. Floor drain system 4.5" (114 mm) See requirements for floor standpipe drain system. Floor drain system requires a Siphon Break Kit (Part Number 285834), 2 Connector Kits (Part
  • 1
  • 2

PRODUCT MODEL NUMBERS
Washer Dimensions:
Undercounter installation -
washer only:
W10441093D
04/2013
WFW94HEA, WFW96HEA, WFW88HEA, WFW70HEB,
WFW80HEB, WFW86HEB, WFW8640B
Front-Loading Automatic Washer
Recessed or closet installation - stacked washer and dryer
All dimensions show recommended spacing allowed, except for
closet door ventilation openings which are the minimum required.
For each arrangement, consider allowing more space for ease of
installation and servicing, and spacing for companion appliances
and clearances for walls, doors, and floor moldings.
Space must be large enough to allow door to fully open.
Add spacing of 1" (25 mm) on all sides of washer to reduce
noise transfer. If a closet door or louvered door is installed, top
and bottom air openings in door are required.
1"
(25 mm)
5"
(127 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
76.5"
(1943 mm)
6"
(152 mm)
1"
(25 mm)
7"
(178 mm)
14"
(356 mm)
1"
(25 mm)
4"
(102 mm)
1"
(25 mm)
Custom cabinet installation:
Recessed area or closet installation (washer only):
1"
(25 mm)
4"
(102 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)