Whirlpool WFW96HEAW Dimension Guide

Whirlpool WFW96HEAW Manual

Whirlpool WFW96HEAW manual content summary:

  • Whirlpool WFW96HEAW | Dimension Guide - Page 1
    PRODUCT MODEL NUMBERS WFW94HEA, WFW96HEA Washer Dimensions: 51" (1295 mm) 27" (686 mm) Front-Loading Automatic Washer Undercounter installation washer only: 39" installation - stacked washer and dryer 6" (152 mm) 3" (76 mm) 771/2" (1969 mm) 48 in.2 (310 cm2) All dimensions show recommended
  • Whirlpool WFW96HEAW | Dimension Guide - Page 2
    Break Kit (Part Number 285834), 2 Connector Kits (Part Number 285835), and an Extension Drain Hose (Part Number 285863) that may be purchased separately. See "Alternate Parts". Minimum siphon break height: 28" (710 mm) from bottom of washer. (Additional hoses may be needed.) Because Whirlpool
  • 1
  • 2

PRODUCT MODEL NUMBERS
Washer Dimensions:
Undercounter installation -
washer only:
Custom Cabinet installation:
W10441093A
09/2012
WFW94HEA, WFW96HEA
Front-Loading Automatic Washer
Recessed area or closet installation
Recessed or closet installation - stacked washer and dryer
31
1
/
2
"
(800 mm)
1
/
2
" - 1"
(13 mm - 25 mm
27"
(686 mm)
38"
(965 mm)
51"
(1295 mm)
1"
(25 mm)
5"
(127 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
77
1
/
2
"
(1969 mm)
6"
(152 mm)
1"
(25 mm)
1"
(25 mm)
1"
(25 mm)
39" min.
(990 mm)
1"
(25 mm)
4"
(102 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
7"
(178 mm)
14"
(356 mm)
1"
(25 mm)
4"
(102 mm)
1"
(25 mm)
All dimensions show recommended spacing allowed, except for
closet door ventilation openings which are the minimum required.
For each arrangement, consider allowing more space for ease of
installation and servicing, and spacing for companion appliances
and clearances for walls, doors, and floor moldings.
Space must be large enough to allow door to fully open.
Add spacing of 1" (25 mm) on all sides of washer to reduce
noise transfer. If a closet door or louvered door is installed, top
and bottom air openings in door are required.