Whirlpool WGD4995EW Dimension Guide
Whirlpool WGD4995EW Manual
 |
View all Whirlpool WGD4995EW manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WGD4995EW manual content summary:
- Whirlpool WGD4995EW | Dimension Guide - Page 1
for recessed area or closet The dimensions shown are for the minimum spacing allowed. ■■ Additional spacing should be considered for ease of installation and servicing. 18"/18" (457 mm/ 457 mm) 48 in.2/48 in.2 (310 cm2/ 310 cm2) ■■ Additional clearances might be required for wall, door, and floor - Whirlpool WGD4995EW | Dimension Guide - Page 2
compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed within 6 ft (1.8 m) of the dryer in for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.
-
1 -
2
 |
 |
29" and 27" Wide Gas Dryers
PRODUCT MODEL NUMBERS
W10617665B
02/2015
WGD4890B, WGD4995E, WGD4890B
29" Wide Models – Dryer Dimensions
A
22
3
/
4
"
(578 mm)
27
3
/
4
"*
(705 mm)
26"**
(660 mm)
29"
(737 mm)
1
1
/
2
"
(38 mm)
41
1
/
2
"
(1054 mm)
27
3
/
4
"*
(705 mm)
29"
(737 mm)
41
1
/
2
"
(1054 mm)
13
3
/
4
"
(349 mm)
1
/
2
"
(13 mm)
26"**
(660 mm)
NOTE:
Leveling legs should be 1/2" (13 mm) (to match height of
3.6 cu. ft. capacity washer) or 1½" (38 mm) (to match height of
3.8 cu. ft. capacity washer).
* 6.5 or 7.0 cu. ft. capacity models
** 6.0 cu. ft. capacity models
27" Wide Models – Dryer Dimensions
A
A. Wide opening side-swing door
B. Wide opening hamper door
22
3
/
4
"
(578 mm)
29
1
/
2
"
(749 mm)
27"
(686 mm)
1
1
/
2
"
(38 mm)
43"
(1092 mm)
29
1
/
2
"
(749 mm)
27"
(686 mm)
13
3
/
4
"
(349 mm)
1
1
/
2
"
(38 mm)
43"
(1092 mm)
B
Installation Spacing
3"/3"
(76 mm/76 mm)
3"/3"
(76 mm/76 mm)
24 in.
2
/24 in.
2
(155 cm
2
/
155 cm
2
)
48 in.
2
/48 in.
2
(310 cm
2
/
310 cm
2
)
18"/18"
(457 mm/
457 mm)
1"/1"
(25 mm/
25 mm)
1"/0"
(25 mm/0 mm)
5
1
/
2
"/0"
(140 mm/0 mm)
14" max.
(356 mm)
B
Installation spacing for recessed area or closet
The dimensions shown are for the minimum spacing allowed.
■
Additional spacing should be considered for ease of installation and
servicing.
■
Additional clearances might be required for wall, door, and floor
moldings.
■
Additional spacing of 1" (25 mm) on all sides of the dryer is
recommended to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation openings in
the top and bottom of the door are required. Louvered doors with
equivalent ventilation openings are acceptable.
■
Companion appliance spacing should also be considered.
■
Special provisions must be made in mobile homes to introduce outside
air into the dryer. The opening (such
as a nearby window) should be at least twice as large
as the dryer exhaust opening.