Whirlpool WGD92HEFW Dimension Guide

Whirlpool WGD92HEFW Manual

Get Whirlpool WGD92HEFW PDF manuals and user guides View all Whirlpool WGD92HEFW manuals
Add to My Manuals
Save this manual to your list of manuals

Whirlpool WGD92HEFW manual content summary:

  • Whirlpool WGD92HEFW | Dimension Guide - Page 1
    (127 mm) clearance behind dryer for exhaust vent with elbow. See "Venting Requirements." Installation spacing for recessed area or closet installation All dimensions show recommended and minimum spacing allowed. Additional spacing should be considered for ease of installation and servicing. 18" min
  • Whirlpool WGD92HEFW | Dimension Guide - Page 2
    larger tubing should be used. Pipe-joint compounds resistant to the action of L.P. gas must be used. An individual manual shutoff valve must be installed within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas Code ANSI Z223.1. ELECTRICAL REQUIREMENTS A 120-volt, 60 Hz, AC-only, 15
  • 1
  • 2
Gas Dryer
PRODUCT MODEL NUMBERS
Front view:
Side view:
Back view:
Recommended Installation Spacing:
W10775221A
12/2015
WGD7505F, WGD7540F, WGD7590F, WGD75HEF, WGD7740F, WGD77HEF, WGD90HEF, WGD92HEF
Bottom view:
27"
(686 mm)
38
3
/
4
" Min.
(984 mm)
39" Max.
(990 mm)
6
1
/
4
"
(159 mm)
29
7
/
8
"*
(759 mm)
3
1
/
2
"*
(89 mm)
5
3
/
4
"*
(146 mm)
6
1
/
8
"*
(156 mm)
14
3
/
8
"
(365 mm)
25
3
/
4
"
(654 mm)
3
/
4
"*
(18 mm)
NOTE:
Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
“Venting Requirements.”
18" min.
(457 mm)
1"
(25 mm)
5"
(127 mm)
24 in.
2
min.
(155 cm
2
)
48 in.
2
min.
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
Installation spacing for recessed area or closet installation
All dimensions show recommended and minimum spacing allowed.
Additional spacing should be considered for ease of installation and servicing.
Additional spacing should be considered on all sides of the dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are
required. Louvered doors with equivalent ventilation openings are acceptable.
Companion appliance spacing should also be considered.
Gas
Water inlet
(Steam Models Only)
Vent