Whirlpool WRF532SMBM Dimension Guide
Whirlpool WRF532SMBM Manual
 |
View all Whirlpool WRF532SMBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WRF532SMBM manual content summary:
- Whirlpool WRF532SMBM | Dimension Guide - Page 1
and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. If you are installing your refrigerator next to a fixed wall, leave 21⁄2" (6.3 cm) minimum on the hinge
-
1
 |
 |
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
LOCATION REQUIREMENTS
WRF532SMB
WRF535SMB
Electrical:
A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned
off by a switch. Do not use an extension
cord.
NOTE:
Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat,
Refrigerator or Freezer Control depending on
the model) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.”
Water:
A cold water supply with water
pressure between 30 and 120 psi (207 and
827 kPa) is required to operate the ice maker
and water dispenser. If you have questions
about your water pressure, call a licensed,
qualified plumber.
IMPORTANT:
The pressure of the water
coming out of a reverse osmosis system
going to the water inlet valve of the
refrigerator needs to be between 35 and
120 psi (241 and 827 kPa).
Reverse Osmosis Water Supply:
If a
reverse osmosis water filtration system is
connected to your cold water supply, the
water pressure to the reverse osmosis
system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10597594B
10/16/13
2
¹⁄₂
" (6.3 cm)
¹⁄₂
" (1.25 cm)
To ensure proper ventilation for your refrigerator, allow for a
1
±
2
" (1.25 cm) space on
each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If
your refrigerator has an ice maker, make sure you leave some extra space at the
back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2
1
±
2
" (6.3 cm)
minimum on the hinge side (some models require more) to allow for the door to
swing open.
NOTE:
This refrigerator is intended for use in a location where the temperature
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The
preferred room temperature range for optimum performance, which reduces
electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator near a heat source,
such as an oven or radiator.
Model
Number/
Size
Height -
Overall
“A”
Height -
Top of
Cabinet
“B”
Depth -
Doors Open
90°
“C”
Depth -
Drawer
Open
“D”
Depth -
With
Handles
“E”
Depth -
Without
Handles
“F”
Depth -
Cabinet
Only
“G”
Width -
Cabinet
“H”
Width -
Door Open
90°
“I”
WRF535SMB
24.8 cu. ft.
70
1
±
8
"
(178.1 cm)
68
13
±
16
"
(174.8 cm)
48
1
±
16
"
(122.1 cm)
53
1
±
8
"
(135 cm)
35
7
±
16
"
(90 cm)
32
15
±
16
"
(83.7 cm)
29
1
±
8
"
(74 cm)
35
5
±
8
"
(90.5 cm)
43
3
±
8
"
(110.2 cm)
WRF532SMB
21.7 cu. ft.
70
1
±
8
"
(178.1 cm)
68
13
±
16
"
(174.8 cm)
47
1
±
16
"
(119.5 cm)
52
1
±
8
"
(132.4 cm)
34
7
±
16
"
(87.5 cm)
31
15
±
16
"
(81.1 cm)
28
1
±
8
"
(71.4 cm)
32
5
±
8
"
(82.9 cm)
42
3
±
8
"
(107.6 cm)
A
overall
B
top of
cabinet
H
not incl.
handle
F
incl.
handle
E
D
cabinet
G
90˚
90˚
C
I
Bottom Mount Refrigerator