Whirlpool WRT519SZDW Instruction Sheet
Whirlpool WRT519SZDW Manual
 |
View all Whirlpool WRT519SZDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Whirlpool WRT519SZDW manual content summary:
- Whirlpool WRT519SZDW | Instruction Sheet - Page 1
and the following instructions. Parts Included: Brand badge Badge template (on the last page of User Instructions) Tools Needed: Scissors the cutout of the template, as shown. 3. Using the cutout as a guide, press the brand badge onto the freezer door, making sure that the hole is - Whirlpool WRT519SZDW | Instruction Sheet - Page 2
et suivre les instructions. Pièces fournies : Insigne de la marque Gabarit de l'insigne (sur la dernière page des instructions d'utilisation) Outils découpée du gabarit, tel qu'illustré. 3. En utilisant cette ouverture comme guide, appuyer l'insigne de la marque sur la porte du congélateur, en
-
1 -
2
 |
 |
BADGE INSTALLATION INSTRUCTIONS
W10870916B
To install badge, please use the brand badge placement template and the following instructions.
Parts Included:
Brand badge
Badge template (on the last page of User Instructions)
Tools Needed:
Scissors
Masking tape
1.
Cut the template along the dotted lines that match the shape of the brand badge.
2.
Align the edges of the template with the side and top of the freezer door and tape template to the door.
3.
Using the cutout as a guide, press the brand badge onto the freezer door, making sure that the hole is completely covered.
4.
Slowly remove the tape and template.
NOTE:
When the template is correctly aligned, the hole in the door will be within the cutout of the template, as shown.