Home » Whirlpool Manuals » Laundry Washers » Whirlpool WTW6200VW » Manual Viewer

Whirlpool WTW6200VW Use and Care Guide

Whirlpool WTW6200VW - Cabrio - Washer Manual

UPC - 883049140179

View all Whirlpool WTW6200VW manuals

Add to My Manuals
Save this manual to your list of manuals

Whirlpool WTW6200VW manual content summary:

Whirlpool WTW6200VW | Use and Care Guide - Page 1
GUIDE/WASHER USE 4 Starting Your Washer 6 Cycles ...6 Additional Features 8 Modifiers 8 Options...9 Changing Cycles, Modifiers, and Options 9 Normal Sounds 9 LAUNDRY TIPS 10 WASHER CARE 10 Cleaning Your Washer 10 Water Inlet Hoses 10 Vacation, Storage, and Moving Care 10 TROUBLESHOOTING
Whirlpool WTW6200VW | Use and Care Guide - Page 2
with: ■ Use and maintenance procedures ■ Accessory and repair parts sales ■ Features and specifications on our full line of appliances ■ Referrals to local dealers, repair parts distributors, and service companies. Whirlpool Canada LP designated service technicians are trained to fulfill the product
Whirlpool WTW6200VW | Use and Care Guide - Page 3
WASHER SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and if you don't immediately follow instructions. WARNING You can be killed or seriously injured if you don't follow instructions. All safety messages will tell
Whirlpool WTW6200VW | Use and Care Guide - Page 4
dissolving the detergent. The detergent mixture is then sprayed onto the load while the washer spins at low speed. This cleaning action will last up to 10 minutes depending on the cycle selected. The washer then stops spinning, fills with water to the appropriate level and continues washing with the
Whirlpool WTW6200VW | Use and Care Guide - Page 5
and MODIFIERS. Press START or select DELAY WASH (on some models) to start wash at a later time. Washer restarts at the beginning of the new cycle. NOTE: To help protect your garments, not all OPTIONS and MODIFIERS can be selected with all wash cycles. DETERGENT USE Pour measured powdered or liquid
Whirlpool WTW6200VW | Use and Care Guide - Page 6
liquid detergent. 2. Place a load of sorted clothes into the washer. See "Laundry Tips." ■ Load evenly to maintain washer balance. Mix large and small items. ■ Load only to the top of the basket as shown. Overloading can cause poor cleaning. Items should move easily through the wash water. ■ Load
Whirlpool WTW6200VW | Use and Care Guide - Page 7
the washer model that you have. Hand Wash/Wool Use this cycle to clean lightly soiled special care garments or for items labeled as "Machine Washable Wool." (Check label instructions to make sure that the garment is washable.) This cycle uses intermittent-low speed wash action and low-speed spin for
Whirlpool WTW6200VW | Use and Care Guide - Page 8
at the water inlet faucets. ■ Care Control ensures consistent cleaning. ■ Today's detergents work well at temperatures above 60°F (15.6°C). Delay Wash You can use the Delay Wash feature to delay the start of a wash cycle for up to 8 hours (depending on your model). 1. Load the washer and fill
Whirlpool WTW6200VW | Use and Care Guide - Page 9
in a conventional washer. The washer sprays the load with water and detergent for 4 minutes at extra-low spin speed, followed by a soak period. This allows for the detergent to work on the soils. This is followed by alternating periods for spray and soak. Using Presoak will extend your wash cycle by
Whirlpool WTW6200VW | Use and Care Guide - Page 10
instructions can result in death, fire, or electrical shock. 2. Plug in washer or reconnect power. 3. Run the washer using any cycle and a Super Load Size water level to clean the washer basket. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water. 4.
Whirlpool WTW6200VW | Use and Care Guide - Page 11
washer 1. Follow the "Installation Instructions" to locate, level, and connect the washer. 2. Run the washer using any cycle and a Super Load Size water level to clean the washer and remove the antifreeze, if used. Use ½ the manufacturer's recommended amount for a medium-size load. TROUBLESHOOTING
Whirlpool WTW6200VW | Use and Care Guide - Page 12
to continue. ■ Is the washer overloaded? Wash smaller loads. See "Starting Your Washer" for maximum load size. ■ Is there oversudsing? Cancel the current cycle. Select DRAIN & SPIN to drain the load. Re-select your desired cycle and press START. Do not add detergent. Use cold water. ■ Is the lid
Whirlpool WTW6200VW | Use and Care Guide - Page 13
the lid open. Wash/Rinse temperature ■ Are the hot and cold water inlet hoses reversed? If the hot and cold water inlet hoses are reversed, the washer will display an "HC" error code at the end of the cycle. If an error code does not appear but you are experiencing poor washing performance, check to
Whirlpool WTW6200VW | Use and Care Guide - Page 14
from whites and lights. ■ Was the wash temperature too low? Use hot or warm washes if safe for the load. Make sure your hot water system is adequate to provide a hot water wash. ■ Did you use enough detergent, or do you have hard water? Use more detergent for washing heavy soils in cold or hard
Whirlpool WTW6200VW | Use and Care Guide - Page 15
you think you need repair service, first see the "Troubleshooting" section of the Use & Care Guide. If you are unable to resolve the problem after checking "Troubleshooting," additional help can be found by checking the "Assistance or Service" section or by calling Whirlpool. In the U.S.A., call
Whirlpool WTW6200VW | Use and Care Guide - Page 16
service désignés par Whirlpool Canada LP sont formés pour remplir la garantie des produits et fournir un service de sécurité importants dans ce manuel et sur votre appareil ménager. instructions. AVERTISSEMENT Risque possible de décès ou de blessure grave si vous ne suivez pas les instructions
Whirlpool WTW6200VW | Use and Care Guide - Page 17
ajuste ensuite le niveau d'eau pour un rendement de nettoyage et de rinçage optimal. Ceci élimine les calculs approximatifs. Le niveau d'eau correspond exactement garantir une meilleure élimination des taches et salissures. L'action Deep Clean réduit le besoin de prétraitement. La laveuse se remplit
Whirlpool WTW6200VW | Use and Care Guide - Page 18
age. L'eau est filtrée puis remise en circulation. Le filtre forcé coince le sable et les saletés, les chasse par le tuyau d'évacuation afin qu'ils ne se redéposent pas sur les vêtements propres. Delay Wash (lavage différé) L'option Delay Wash arrête. GUIDE DE DÉ de ces instructions peut causer un
Whirlpool WTW6200VW | Use and Care Guide - Page 19
INSTRUCTIONS DE SÉCURITÉ avant de faire fonctionner cet appareil. Voici un guide concernant l'utilisation de la laveuse. Veuillez vous référer aux sections spécifiques de ce manuel és. Appuyer sur START (mise en marche) ou sélectionner DELAY WASH (lavage différé) (sur certains modèles) pour mettre la
Whirlpool WTW6200VW | Use and Care Guide - Page 20
sections de ce guide permettent d'obtenir des Delay Wash (lavage différé), si désiré. Voir "Delay Wash" ( Rinse (rinçage supplémentaire). ■ Lorsque la laveuse a terminé le remplissage pour le programme de rinçage plus petite charge. ■ Suivre les instructions du fabricant des vêtements et de
Whirlpool WTW6200VW | Use and Care Guide - Page 21
Wash/Wool 36 (articles lavables à la main/lainages) Léger Cold/Cold (froide/ froide) Rinse & Spin (rinçage et essorage) 33 Non Non applicable applicable Drain & Spin des vêtements légèrement sales pour lesquels l'étiquette de soin indique "Soie lavable en machine" ou "Programme délicat
Whirlpool WTW6200VW | Use and Care Guide - Page 22
les tissus peu sales et délicats, appuyer sur Soil Level (niveau de saleté) pour abréger la durée de lavage, si nécessaire. Load Size (volume d'eau. On peut aussi modifier manuellement les réglages de niveau d'eau. Wash-Rinse Temp (température de lavage/rinçage) Sélectionner une température de
Whirlpool WTW6200VW | Use and Care Guide - Page 23
. Deep Clean (nettoyage service intense) Par défaut Normal Option Casual/Perm Press (tout-aller/pressage permanent) Option Colors/Darks (couleurs/articles foncés) Option Delicate (articles délicats) Option Hand Wash/Wool (articles lavables à la main/lainages) Option Rinse & Spin (rinçage
Whirlpool WTW6200VW | Use and Care Guide - Page 24
. Pour vidanger la laveuse manuellement et essorer la charge 1. pour sélectionner DRAIN & SPIN (vidange et essorage). 4. articles très sales des articles légèrement sales, même si : Delicate (articles délicats), Hand Wash/Wool (lavage à la main/ Clean (nettoyage en profondeur), Extra Rinse (rinçage
Whirlpool WTW6200VW | Use and Care Guide - Page 25
de rallonge. Le non-respect de ces instructions peut causer un décès, un incendie ou un programme et sélectionner le niveau d'eau Super Load Size pour nettoyer la laveuse et éliminer l' panier. Faire fonctionner la laveuse au réglage Rinse & Spin (rinçage et essorage) pendant environ 30 secondes pour
Whirlpool WTW6200VW | Use and Care Guide - Page 26
coût d'une visite de service... La laveuse et ses composants mousse et permet un rinçage satisfaisant de vos vêtements. Si le code reste affiché et que part de la laveuse. Un morceau de contreplaqué de ¾" (19 mm) sous la laveuse réduira les sons. Voir "Exigences d'emplacement" dans les Instructions
Whirlpool WTW6200VW | Use and Care Guide - Page 27
et les écrous serrés. Voir "Réglage de l'aplomb de la laveuse" dans les Instructions d'installation. ■ Le programme a-t-il été interrompu et l'option Deep Clean (nettoyage en profondeur) sélectionnée par la suite? L'option Deep Clean doit être activée sur une charge sèche uniquement. L'option Deep
Whirlpool WTW6200VW | Use and Care Guide - Page 28
" à la fin du programme. Si aucun code d'erreur n'apparaît mais que la performance de lavage n'est pas satisfaisante, vérifier que les tuyaux d'arrivée d'eau ne sont pas inversés. Voir "Raccordement des tuyaux d'alimentation" dans les Instructions d'installation. ■ Lavez-vous un nombre important de
Whirlpool WTW6200VW | Use and Care Guide - Page 29
programmes Delicate (articles délicats) ou Hand Wash/Wool (lavage à la main/lainages). code d'erreur n'apparaît mais que la performance de lavage n'est pas satisfaisante, vérifier que les tuyaux d'arrivée d'eau ne sont pas inversés. Voir "Raccordement des tuyaux d'alimentation" dans les Instructions
Whirlpool WTW6200VW | Use and Care Guide - Page 30
laveuse (sur certains modèles). Ne pas utiliser plus que la quantité recommandée par le fabricant pour une charge complète. ■ Avez-vous suivi les instructions d'entretien du fabricant indiquées sur l'étiquette du vêtement? 30
Whirlpool WTW6200VW | Use and Care Guide - Page 31
conformément aux instructions jointes à ou fournies avec le produit, Whirlpool Corporation ou Whirlpool Canada LP (ci-après désignées "Whirlpool") paiera pour Service" ou en appelant Whirlpool. Aux É.U., composer le 1-800-253-1301. Au Canada, composer le 18008076777. 7/08 Conservez ce manuel
Whirlpool WTW6200VW | Use and Care Guide - Page 32
All rights reserved. Tous droits réservés. ® Registered Trademark/TM Trademark of Whirlpool, U.S.A., Whirlpool Canada LP Licensee in Canada ® Marque déposée/TM Marque de commerce de Whirlpool, U.S.A., emploi sous licence par Whirlpool Canada LP au Canada 12/08 Printed in U.S.A. Imprimé aux É.-U.

Section	Page
CABRIO™ Automatic washer	1
Use & Care Guide	1
For questions about features, operation/performance, parts, accessories, or service, call: 1-800-253-1301	1
or visit our website at...	1
www.whirlpool.com	1
In Canada, call: 1-800-807-6777	1
or visit our website at...	1
www.whirlpool.ca	1
Quick Start Guide............pg. 5	1
Para una versión en español, visite: www.whirlpool.com Número de pieza W10240443A	1
Laveuse AUTOMATIQUE CABRIO™	1
Guide d’utilisation et d’entretien	1
Pour assistance, installation, ou service, composez le : 1-800-807-6777 ou visitez notre site internet à..	1
www.whirlpool.ca	1
Guide de dÉmarrage rapide....pg. 19	1
TABLE OF CONTENTS	1
Page	1
TABLE DES MATIÈRES	1
Page	1
W10240443A - SP	1
Assistance or Service	2
If you need replacement parts	2
To locate FSP® replacement parts in your area:	2
In the U.S.A.	2
Our consultants provide assistance with:	2
Features and specifications on our full line of appliances	2
Installation information	2
Use and maintenance procedures	2
Accessory and repair parts sales	2
Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.)	2
Referrals to local dealers, repair parts distributors, and service companies	2
For further assistance	2
In Canada	2
Our consultants provide assistance with:	2
Use and maintenance procedures	2
Accessory and repair parts sales	2
Features and specifications on our full line of appliances	2
Referrals to local dealers, repair parts distributors, and service companies. Whirlpool Canada LP designated service technicians are trained to fulfill the product warranty and provide after-warranty service anywhere in Canada.	2
For further assistance	2
WASHER Safety	3
BENEFITS AND FEATURES	4
Your washer has several benefits and features that are summarized here. Some items may not apply to your model.	4
Benefits	4
Auto Water Level	4
Care Control Temperature Management	4
Deep Clean Cleaning Action	4
Features	4
6th Sense™ Technology	4
Electronic Controls	4
Quiet Operation	4
Suspension System	4
4 Spring damper struts to isolate vibration	4
Balance ring at the top and bottom of the wash basket to minimize vibration	4
Operating software designed to sense and correct off-balance loads	4
Stainless Steel Basket	4
Force Filter Wash/Rinse System	4
Delay Wash	4
End of Cycle Signal	4
QUICK START GUIDE/washer USE	4
Starting Your Washer	6
1. Pour measured powdered or liquid detergent into the washer. Add color-safe bleach (powdered or liquid) if needed. Be sure to match powdered color-safe bleach with powdered detergent or match liquid color-safe bleach with liquid detergent.	6
2. Place a load of sorted clothes into the washer. See “Laundry Tips.”	6
3. Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser, if needed. Bleach is fed into the washer and is diluted automatically during the wash cycle.	6
4. Close the washer lid.	6
5. Press POWER. This turns on the washer display.	6
6. Select a Wash Cycle. See “Cycles.”	6
7. Adjust the Modifiers, if desired. See “Modifiers.”	6
8. Select desired Options. See “Options.”	6
9. On some models, select Delay Wash, if desired. See “Delay Wash” in the “Modifiers” section.	6
10. Press START. The wash cycle begins, and the display shows the estimated remaining time. The lid will lock.	6
11. If liquid fabric softener is desired, select Extra Rinse.	6
Cycles	6
Preset Cycle Settings	6
To use the preset cycle settings:	6
1. Press POWER.	6
2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed (see the following chart).	6
3. Press START. The wash cycle will begin.	6
Preset Cycle Settings	7
Cycle	7
Preset Minutes	7
Soil Level*	7
Wash/Rinse Temp	7
Whitest Whites	7
Heavy Duty	7
Normal	7
Casual/Perm Press	7
Colors/Darks	7
Delicate	7
Hand Wash/Wool	7
Rinse & Spin	7
Drain & Spin	7
Whitest Whites	7
Heavy Duty	7
Normal	7
Casual/Perm Press	7
Colors/Darks	7
Delicate	7
Hand Wash/Wool	7
Garments are labeled “Handwash” because:	7
The fiber construction may be sensitive to wash action.	7
The fabric contains sensitive dyes that may bleed.	7
Rinse & Spin	7
When to use Rinse & Spin:	7
For loads that need rinsing only.	7
For completing a cycle after the power has been off.	7
To use or change Rinse & Spin setting:	7
1. Turn knob to RINSE & SPIN until the Rinse & Spin indicator light glows.	7
2. Press START.	7
Drain & Spin	7
To use or change Drain & Spin setting:	7
1. Turn knob to DRAIN & SPIN until the Drain & Spin indicator light glows.	7
2. Press START.	7
Additional Features	8
Load is Done	8
Indicator lights	8
Estimated Time Remaining	8
Modifiers	8
Soil Level	8
For most loads, use the time recommended in the preset cycle settings.	8
For heavy soil and sturdy fabrics, press Soil Level to select more wash time, if needed.	8
For light soil and delicate fabrics, press Soil Level to select less wash time, if needed.	8
Load Size	8
Wash-Rinse Temp	8
Temperature Guide	8
Wash Water Temperature	8
Suggested Fabrics	8
Hot	8
Warm	8
Cold	8
Care Control Temperature Management	8
Care Control ensures consistent cleaning.	8
Today’s detergents work well at temperatures above 60°F (15.6°C).	8
Delay Wash	8
1. Load the washer and fill the dispensers.	8
2. Close the washer lid.	8
3. Press POWER.	8
4. Select the desired Cycle, Modifiers, and Options.	8
5. Press DELAY WASH. 1H (one hour) will be displayed in the time display window. The indicator light for Delay Wash will glow.	8
6. For a longer delay time, press DELAY WASH. The Start time will increase by 1-hour steps.	8
7. Press START. The countdown in hours to the wash cycle will show in the time display window and the indicator light will begin to flash.	8
Options	9
Deep Clean	9
Cycle	9
Deep Clean	9
Whitest Whites	9
Heavy Duty	9
Normal	9
Casual/Perm Press	9
Colors/Darks	9
Delicate	9
Hand Wash/Wool	9
Rinse & Spin	9
Drain & Spin	9
Extra Rinse	9
Fabric Softener	9
Pre Soak (on some models)	9
End of Cycle Signal Volume	9
Changing Cycles, Modifiers, and Options	9
A short tone sounds when a change is selected.	9
Three short tones sound if an unavailable combination is selected. The last selection will not be accepted.	9
Changing Cycles after pressing Start	9
1. Press PAUSE/CANCEL twice to cancel the cycle. The washer will drain.	9
2. Press POWER.	9
3. Select the desired wash cycle.	9
4. Select the desired Modifiers and Options.	9
5. Press START.	9
Changing Modifiers and Options after pressing Start	9
To manually drain the washer and spin the load	9
1. Press PAUSE/CANCEL twice to cancel the wash cycle and drain the washer.	9
2. Press POWER.	9
3. Turn knob to select DRAIN & SPIN.	9
4. Press START.	9
Normal Sounds	9
During washing	9
During drain	9
During wash and spin	9
Laundry Tips	10
Preparing clothes for washing	10
Close zippers, snaps, and hooks to avoid snagging other items. Tie strings and sashes to avoid tangles.	10
Remove pins, buckles, and other hard objects to avoid scratching the washer interior. Remove non-washable trim and ornaments.	10
Empty pockets and turn them inside out; turn down cuffs. Turn wool and synthetic knits inside out to avoid pilling.	10
Brush away lint and dirt. Treat spots and stains, stained or wet garments should be washed promptly for best results.	10
Mend tears, loose hems, and seams.	10
Sorting	10
Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy, synthetics, permanent press). When possible, turn lint-givers inside out.	10
Separate dark colors from light colors, colorfast items from noncolorfast items.	10
Sort by fabric and construction (sturdy cottons, knits, delicate items).	10
When washing waterproof/water-resistant items, such as plastic-lined mattress pads, shower curtains, tarpaulins, jackets or sleeping bags, use one of the following cycles: Delicate, Hand Wash/Wool, Colors/Darks, or Whitest Whites.	10
Cycle Options	10
For additional performance and enhancements to desired cycle, select options such as Deep Clean, Extra Rinse, and Fabric Softener Dispenser.	10
Unloading	10
Remove clothes from washer after the cycle is completed. Metal objects such as zippers, snaps, and buckles may rust if left in the washer basket for a long time.	10
Washer care	10
Cleaning Your Washer	10
Water Inlet Hoses	10
Vacation, Storage, and Moving Care	10
Non-use or vacation care:	10
Unplug washer or disconnect power.	10
Turn off the water supply to the washer. This helps avoid unintended flooding (due to a water pressure surge) while you are away.	10
To winterize washer:	10
1. Shut off both water faucets.	10
2. Disconnect and drain water inlet hoses.	10
3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.	10
4. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.	10
5. Unplug washer or disconnect power.	10
To use washer again:	10
1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.	10
2. Plug in washer or reconnect power.	10
3. Run the washer using any cycle and a Super Load Size water level to clean the washer and remove the antifreeze, if used. Use ½ the manufacturer's recommended amount for a medium-size load.	10
To transport the washer:	10
1. Shut off both water faucets.	10
2. Disconnect and drain water inlet hoses.	10
3. If the washer will be moved during freezing weather, put 1 qt (1 L) of R.V.-type antifreeze in the basket. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.	10
4. Disconnect the drain from the drain system.	10
5. Unplug the power cord.	10
6. Place the inlet hoses into the basket.	10
7. Drape the power cord and drain hose over edge into the basket.	10
8. Place foam packing ring from the original shipping materials in the top of washer. If you do not have the original foam packing ring, place heavy blankets, towels, etc. into basket opening. Close the lid and put a piece of tape over the lid and do...	11
Reinstalling the washer	11
1. Follow the “Installation Instructions” to locate, level, and connect the washer.	11
2. Run the washer using any cycle and a Super Load Size water level to clean the washer and remove the antifreeze, if used. Use ½ the manufacturer's recommended amount for a medium-size load.	11
troubleshooting	11
First try the solutions suggested here and possibly avoid the cost of a service call...	11
Washer and Components	11
Washer displaying code messages	11
“LF” (Washer is taking too long to fill) Check the following: Are the water inlet hoses kinked or clogged? Are the water inlet valve screens clear? Press PAUSE/CANCEL to clear display.	11
“Ld” (Washer is taking too long to drain water from the wash tub) Check the following: Is the drain hose kinked or clogged? Is the drain hose installed properly? See “Connect the Drain Hose” in the Installation Instructions. Press PAUSE/CANCE...	11
“uL” (Unbalanced Load) If the load is unbalanced, the washer will display this code while running an imbalanced load correction routine at the end of the wash cycle and before the final spin. If the code remains and the wash cycle dial is flashin...	11
“oL” (Over Load) Is the washer overloaded? The washer has attempted to fill and begin the wash cycle. If the washer is overloaded, it will drain any water and detergent that was added during the fill. To correct the overload, remove several items...	11
“Sd” (Suds Detected) Did you add too much detergent? Always measure detergent. Follow detergent manufacturer’s directions.	11
“lid” (Lid Opened) Is the lid open? Close the lid to clear the display.	11
“HC” (Cold and Hot hoses switched) This code will appear at the end of the wash cycle to indicate that the cold and hot water inlet hoses are switched. If an error code does not appear but you are experiencing poor washing performance, check to s...	11
“dL” (Door/Lid cannot lock) Indicates lid is not locked. Check for items caught in the lid keeping it from closing. Press PAUSE/CANCEL once to clear the code.	11
“dU” (Door/Lid cannot unlock) Is there excessive weight on the lid, such as a basket of laundry? Excessive weight will keep the lid from unlocking. Press PAUSE/CANCEL once to clear the code.	11
“F##” code Press PAUSE/CANCEL once to clear code. Press START. If code appears again, call for service.	11
Noisy, vibrating, off-balance	11
Is the washer level? Does the washer rock when pushed against the corners? The washer must be level. The front and rear feet must be in firm contact with the floor. Check that the locknuts are tightened. See “Level the Washer” in the Installation...	11
Is the floor flexing, sagging, or not level? Flooring that flexes or is uneven can contribute to noise and vibration of the washer. A ¾\	11
Is the load balanced? Evenly distribute the load in the washer basket and make sure the height of the load does not exceed the top row of basket holes. See “Starting Your Washer.”	11
Do you hear clicking or other noises when the cycle changes from washing to draining or spinning? When the drive system shifts or the washer basket settles between cycles you may hear noises that are different from your previous washer. These are nor...	11
Is the washer gurgling or humming? When the washer drains, the pump will make a continuous humming with periodic gurgling or surging sounds as the final amounts of water are removed. This is normal.	11
Are you washing a small load? You will hear more splashing sounds when washing small loads. This is normal.	11
The washer basket moves while washing. This is normal.	11
Washer leaks	11
Are the water inlet hoses tight?	11
Are the water inlet hose washers properly seated? Check both ends of each hose. See “Connect the Inlet Hoses” in the Installation Instructions.	11
Did you pull the drain hose from the washer cabinet and install it in a standpipe or laundry tub? The drain hose should be pulled from the washer cabinet and secured to the drainpipe or laundry tub. See “Connect Drain Hose” and “Secure the Drai...	11
Is the sink or drain clogged? Sink and drainpipe must be able to carry away 17 gal. (64 L) of water per minute. If sink or drainpipe is clogged or slow, water can back up out of drainpipe or sink.	12
Is water splashing off the tub ring or the load? The wash load should be balanced and not overloaded. If the wash load is unbalanced or overloaded, incoming water can deflect off the load.	12
Is the washer properly installed? The washer must be level. The feet should be properly installed and the nuts tightened. See “Level the Washer” in the Installation Instructions.	12
Was the cycle interrupted and then the Deep Clean option selected? The Deep Clean option should be started on a dry load only. The Deep Clean option cannot be selected after the tub has started filling with water.	12
Check household plumbing (laundry tubs, faucets, drainpipe, water pipes) for leaks.	12
Dispenser operation	12
Are the laundry products in the correct dispensers? Add the correct amount of liquid chlorine bleach to the dispenser. Use only liquid chlorine bleach in the dispenser.	12
Is there water remaining in the bottom of a dispenser? Did the dispenser drain properly? A small amount of water may be left in a dispenser at the end of the cycle. This is normal.	12
Did you put powdered or liquid color-safe bleach into the liquid chlorine bleach dispenser (on some models)? Add powdered or liquid color-safe bleach directly to the washer basket. Do not use the chlorine bleach dispenser for color-safe bleach.	12
Washer Operation	12
Washer won’t fill, rinse or agitate; washer stops	12
Is the power cord plugged into a grounded 3 prong outlet? Plug power cord into a grounded 3 prong outlet.	12
Are you using an extension cord? Do not use an extension cord.	12
Is there power at the plug? Check electrical source or call electrician.	12
Is the indicator on the Cycle Control knob properly lined up with a cycle? Turn the Cycle Control knob to the right slightly.	12
Are the water inlet valve screens clogged? Turn off the water and remove inlet hoses from the washer. Remove any accumulated film or particles. Reinstall hoses, turn on water, and check for leaks.	12
Are the hot and cold water faucets turned on? Turn on the water.	12
Is the water inlet hose kinked? Straighten the hoses.	12
Does the water level seem too low, or does the washer appear to not fill completely? The Auto Water Level feature senses the size of the load and adds the correct amount of water for the load size.	12
Are you using Auto Water Level? The Auto feature senses the size of the load and adds the correct amount of water for the load size.	12
Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.	12
Is the washer in a normal pause in the cycle? The washer may pause during certain cycles. Allow the cycle to continue.	12
Is the washer overloaded? Wash smaller loads. See “Starting Your Washer” for maximum load size.	12
Is there oversudsing? Cancel the current cycle. Select DRAIN & SPIN to drain the load. Re-select your desired cycle and press START. Do not add detergent. Use cold water.	12
Is the lid open? The lid must be closed during operation. The washer will not operate with the lid open.	12
Did you add more items to the load once the washer started? Once the load is wet, there may appear to be space for more items. Do not add more than 1 or 2 garments after the cycle has started. For best results determine load size with dry items only.	12
Washer continues to fill or drain, or the cycle seems stuck	12
Is the top of drain hose lower than the control knobs on washer? The top of the drain hose must be at least 39\	12
Does the drain hose fit too tightly in the standpipe, or is it taped to the standpipe? The drain hose should be loose yet fit securely. Do not seal the drain hose with tape. The hose needs an air gap. See “Installation Instructions.”	12
Washer won’t drain or spin; water remains in washer	13
Is the drain hose clogged, or the end of the drain hose more than 96\	13
Is the lid open? The lid must be closed during operation. The washer will not operate with the lid open.	13
Wash/Rinse temperature	13
Are the hot and cold water inlet hoses reversed? If the hot and cold water inlet hoses are reversed, the washer will display an “HC” error code at the end of the cycle. If an error code does not appear but you are experiencing poor washing perfor...	13
Are you washing many loads? As your frequency of loads washed increases, the water temperature may decrease for hot and warm temperatures. This is normal.	13
Do you have an ENERGY STAR® qualified washer? The wash water temperatures may feel cooler to you than those of your previous washer. This is normal.	13
Does the wash water temperature feel lower than usual? As washing progresses, the wash temperature will decrease slightly for hot and warm washes. This is normal.	13
Excessive sudsing	13
Is there excessive sudsing? Always measure detergent. Follow detergent manufacturer’s directions. If you have very soft water, you might need to use less detergent.	13
Was the cycle interrupted and then the Deep Clean option selected? The Deep Clean option should be started on a dry load only. The Deep Clean option cannot be selected after the tub has started filling with water.	13
Cycle did not run Deep Clean option	13
Did you select the Deep Clean option? The Deep Clean option must be selected for it to be included in a wash cycle. The Deep Clean option should be started on a dry load only. Deep Clean cannot be selected after the tub has started filling with water.	13
The Deep Clean option is a default in the Heavy Duty cycle and may be added to other cycles.	13
Clothing Care	13
Load too wet	13
Did you use the right cycle for the load being washed? Select a higher spin speed.	13
Did you use a cold rinse? Cold rinses leave loads wetter than warm rinses. This is normal.	13
Did you wash an extra large load? A large unbalanced load could result in a reduced spin speed and wet clothes at the end of the cycle. Evenly distribute the load and make sure the height of the load does not exceed the top row of basket holes.	13
Residue or lint on load	13
Did you sort properly? Sort lint givers (towels, chenille) from lint takers (corduroy, synthetics). Also sort by color.	13
Did you overload the washer? The wash load must be balanced and not overloaded. Clothes should move freely. Lint or powdered detergent can be trapped in the load if the washer is overloaded. Wash smaller loads. See “Starting Your Washer” for maxi...	13
Did you use enough detergent? Follow detergent manufacturer’s directions. Use enough detergent to hold the lint in the water.	13
Did you line dry your clothing? If so, you can expect some lint on the clothing. The air movement and tumbling of a dryer removes lint from the load.	13
Was paper or tissue left in pockets?	13
Is your water colder than 60°F (15.6°C)? Wash water colder than 60°F (15.6°C) may not completely dissolve the detergent.	13
Did you use the proper Soil Level and Wash Cycle for the load? Reducing wash time (duration) and wash speed are ways to reduce lint.	13
Did you add detergent to the dispenser? For best results, use the dispenser to dissolve the detergent.	13
Load is wrinkled, twisted, or tangled	13
Did you unload the washer promptly? Unload the washer as soon as it stops.	13
Did you use the right cycle for the load being washed? To reduce wrinkling, tangling, and twisting, select a cycle with low wash and spin speeds, such as Delicate or Hand Wash/ Wool.	13
Did you overload the washer? The wash load must be balanced and not overloaded. Loads should move freely during washing to reduce wrinkling, tangling, and twisting.	13
Was the wash water warm enough to relax wrinkles? If safe for the load, use warm or hot wash water. Use cold rinse water.	13
Are the hot and cold water inlet hoses reversed? A hot rinse followed by spin will cause wrinkling. Check that the hot and cold water hoses are connected to the correct faucets. If the hot and cold water inlet hoses are reversed, the washer will disp...	13
Stains, gray whites, dingy colors	14
Did you properly sort the load? The transfer of dye can occur when mixing whites and colors in a load. Sort dark clothes from whites and lights.	14
Was the wash temperature too low? Use hot or warm washes if safe for the load. Make sure your hot water system is adequate to provide a hot water wash.	14
Did you use enough detergent, or do you have hard water? Use more detergent for washing heavy soils in cold or hard water. Water temperature should be at least 60°F (15.6°C) for soap to dissolve and work properly. For best performance, use the dete...	14
Did you follow the manufacturer’s directions when adding detergent and fabric softener? Measure detergent and fabric softener. Use enough detergent to remove soil and hold it in suspension. Dilute fabric softener and add to the rinse portion of a c...	14
Is there above average iron (rust) in water? You may need to install an iron filter.	14
Did you add detergent to the dispenser? For best results, use the dispenser to dissolve the detergent.	14
Did you add fabric softener directly to the load? Use your fabric softener dispenser. Do not drip fabric softener onto clothes.	14
Did you use a fabric softener dispensing ball? Use the fabric softener dispenser provided with the washer. Dispensing balls will not operate correctly with this washer.	14
Did you unload the washer promptly? To avoid the transfer of dye, unload the washer as soon as it stops.	14
Did you add detergent, chlorine bleach, or fabric softener too late in the cycle? Detergent, chlorine bleach, and fabric softener should be added to the dispensers before starting the washer.	14
Garments damaged	14
Were sharp items removed from pockets before washing? Empty pockets, zip zippers, snap, or hook fasteners before washing to avoid snagging and tearing of load.	14
Were strings and sashes tied to avoid tangling? Straps and strings can easily become entangled in the load, causing strain on seams and tearing.	14
Were items damaged before washing? Mend rips and broken threads in seams before washing.	14
Did you overload the washer? The wash load must be balanced and not overloaded. Loads should move freely during washing.	14
Did you add chlorine bleach properly? Do not pour chlorine bleach directly onto load. Wipe up bleach spills. Undiluted bleach will damage fabrics. Do not place load items on top of the bleach dispenser when loading and unloading the washer (on some m...	14
Did you follow the garment manufacturer’s care label instructions?	14
WHIRLPOOL CORPORATION LAUNDRY WARRANTY	15
LIMITED WARRANTY	15
For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Fa...	15
ITEMS EXCLUDED FROM WARRANTY	15
This limited warranty does not cover:	15
1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is used in a manner that is inconsistent to published user or operator instructions and/or installation instructions.	15
2. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing.	15
3. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty coverage.	15
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by Whirlpool.	15
5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.	15
6. Pick up and delivery. This major appliance is intended to be repaired in your home.	15
7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.	15
8. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Whirlpool servicer is not available.	15
9. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with Whirlpool’s published installation instructions.	15
10. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered, or cannot be easily determined.	15
DISCLAIMER OF IMPLIED WARRANTIES	15
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the du...	15
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES	15
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of incide...	15
If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.	15
If you think you need repair service, first see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve the problem after checking “Troubleshooting,” additional help can be found by checking the “Assistance or Se...	15
Dealer name	15
Address	15
Phone number	15
Model number	15
Serial number	15
Purchase date	15
ASSISTANCE OU SERVICE	16
Si vous avez besoin de pièces de rechange	16
Aux États-Unis	16
Caractéristiques et spécifications de notre gamme complète d'appareils ménagers	16
Renseignements d'installation	16
Procédés d'utilisation et d'entretien	16
Vente d'accessoires et de pièces de rechange	16
Assistance spécialisée au client (langue espagnole, malentendants, malvoyants, etc.)	16
Références aux marchands, compagnies de service de réparation et distributeurs de pièces de rechange locaux.	16
Au Canada	16
Procédés d'utilisation et d'entretien	16
Vente d'accessoires et de pièces de rechange	16
Caractéristiques et spécifications de notre gamme complète d'appareils ménagers	16
Les références aux concessionnaires, compagnies de service de réparation et distributeurs de pièces de rechange locaux. Les techniciens de service désignés par Whirlpool Canada LP sont formés pour remplir la garantie des produits et fournir un...	16
SÉCURITÉ DE LA LAVEUSE	16
AVANTAGES ET CARACTÉRISTIQUES	17
Votre laveuse présente plusieurs avantages et caractéristiques qui sont résumés ici. Certains articles peuvent ne pas s'appliquer à votre modèle.	17
Avantages	17
Niveau d'eau automatique	17
Gestion de la température de la commande de soin	17
Action de nettoyage en profondeur	17
Caractéristiques	18
Technologie 6th Sense™	18
Commandes électroniques	18
Fonctionnement silencieux	18
Système de suspension	18
4 jambes élastiques à ressort pour isoler les vibrations	18
Un anneau d'équilibrage en haut et au fond du panier de lavage pour minimiser les vibrations	18
Un logiciel d'exploitation concu pour détecter et corriger les charges déséquilibrées	18
Panier en acier inoxydable	18
Système de lavage/rinçage par filtre forcé	18
Delay Wash (lavage différé)	18
Signal de fin de programme	18
Guide DE DÉMARRAGE RAPIDE/UTILISATION DE LA LAVEUSE	18
Mise en marche de la laveuse	20
1. Verser la quantité mesurée de détergent en poudre ou liquide dans la laveuse. Ajouter de l'agent de blanchiment (en poudre ou liquide) sans danger pour les couleurs si nécessaire. Veiller à utiliser un agent de blanchiment en poudre sans dang...	20
2. Mettre une charge de vêtements triés dans la laveuse. Voir “Conseils de lessivage”.	20
3. Verser la quantité mesurée d'agent de blanchiment au chlore liquide le distributeur d'agent de blanchiment au chlore liquide, si nécessaire. L'agent de blanchiment est dilué et automatiquement distribué au moment approprié au cours du progra...	20
4. Rabattre le couvercle de la laveuse.	20
5. Appuyer sur POWER (mise sous tension). Ceci active l'afficheur de la laveuse.	20
6. Sélectionner un programme de lavage. Voir “Programmes”.	20
7. Ajuster les modificateurs, si désiré. Voir “Modificateurs”.	20
8. Sélectionner les options désirées. Voir “Options”.	20
9. Sur certains modèles, sélectionner Delay Wash (lavage différé), si désiré. Voir “Delay Wash” (lavage différé) dans la section “Modificateurs”.	20
10. Appuyer sur START (mise en marche). Le programme de lavage commence et l'afficheur indique la durée résiduelle estimée. Le couvercle se verrouillera.	20
11. Si l'on souhaite ajouter de l'assouplissant pour tissu, sélectionner Extra Rinse (rinçage supplémentaire).	20
Programmes	20
Préréglages de programme	20
Utilisation des préréglages de programme :	20
1. Appuyer sur POWER (alimentation).	20
2. Sélectionner le programme désiré en tournant le bouton. Les préréglages de programme seront affichés (voir tableau suivant).	20
3. Appuyer sur START (mise en marche). Le programme de lavage commencera.	20
Préréglages de programme	21
Programme	21
Minutes pré- réglées	21
Niveau de saleté*	21
Temp. lavage/ rinçage	21
Whitest Whites (blancs les plus blancs)	21
Heavy Duty (service intense)	21
Normal	21
Casual/Perm Press (tout-aller/pressage permanent)	21
Colors/Darks (couleurs/articles foncés)	21
Delicate (articles délicats)	21
Hand Wash/Wool (articles lavables à la main/lainages)	21
Rinse & Spin (rinçage et essorage)	21
Drain & Spin (vidange et essorage)	21
Whitest Whites (blancs les plus blancs)	21
Heavy Duty (service intense)	21
Normal	21
Casual/Perm Press (tout-aller/pressage permanent)	21
Colors/Darks (couleurs/articles foncés)	21
Delicate (articles délicats)	21
Hand Wash/Wool (articles lavables à la main/lainages)	21
L'etiquette des vêtements mentionne “Hand Wash” (lavage à la main) parce que :	21
Les fibres peuvent être sensibles à l'action de lavage.	21
Le tissu contient des teintures sensibles qui peuvent déteindre.	21
Rinse & Spin (rinçage et essorage)	22
Quand utiliser Rinse & Spin (rinçage et essorage) :	22
Pour les charges qui nécessitent un rinçage uniquement.	22
Pour achever un programme après que l'alimentation a été interrompue.	22
Utilisation ou modification du réglage Rinse & Spin (rinçage et essorage) :	22
1. Tourner le bouton à RINSE & SPIN jusqu'à ce que le témoin lumineux Rinse & Spin s'allume.	22
2. Appuyer sur START (mise en marche).	22
Drain & Spin (vidange et essorage)	22
Utilisation ou modification du réglage Drain & Spin (vidange et essorage) :	22
1. Tourner le bouton à DRAIN & SPIN jusqu'à ce que le témoin lumineux Drain & Spin s'allume.	22
2. Appuyer sur START (mise en marche).	22
Caractéristiques supplémentaires	22
Load is Done (charge prête)	22
Témoins lumineux	22
Durée résiduelle estimée	22
Modificateurs	22
Soil Level (niveau de saleté)	22
Pour la plupart des charges, utiliser la durée recommandée dans les préréglages de programme.	22
Pour les tissus très sales et robustes, appuyer sur Soil Level (niveau de saleté) pour prolonger la durée de lavage, si nécessaire.	22
Pour les tissus peu sales et délicats, appuyer sur Soil Level (niveau de saleté) pour abréger la durée de lavage, si nécessaire.	22
Load Size (volume de la charge)	22
Wash-Rinse Temp (température de lavage/rinçage)	22
Guide de température	22
Température de l'eau de lavage	22
Tissus suggérés	22
Hot (chaude)	22
Warm (tiède)	22
Cold (froide)	22
Gestion de la température de la commande de soin	23
La commande de soin assure un nettoyage uniforme.	23
Les détergents actuels fonctionnent bien à des températures supérieures à 60°F (15,6°C).	23
Delay Wash (lavage différé)	23
1. Charger la laveuse et remplir les distributeurs.	23
2. Rabattre le couvercle de la laveuse.	23
3. Appuyer sur POWER (alimentation).	23
4. Sélectionner le programme, les modificateurs et les options désirés.	23
5. Appuyer sur DELAY WASH (lavage différé). 1H (une heure) s'affichera sur la fenêtre d'affichage de la durée. Le témoin lumineux pour Delay Wash s'allumera.	23
6. Pour un délai plus long, appuyer sur DELAY WASH. Le délai de mise en marche augmentera par incréments d'une heure.	23
7. Appuyer sur START (mise en marche). Le compte à rebours en heures jusqu'au programme de lavage apparaîtra dans la fenêtre d'affichage de la durée et le témoin lumineux commencera à clignoter.	23
Options	23
Deep Clean (nettoyage en profondeur)	23
Programme	23
Whitest Whites (blancs les plus blancs)	23
Heavy Duty (service intense)	23
Normal	23
Casual/Perm Press (tout-aller/pressage permanent)	23
Colors/Darks (couleurs/articles foncés)	23
Delicate (articles délicats)	23
Hand Wash/Wool (articles lavables à la main/lainages)	23
Rinse & Spin (rinçage et essorage)	23
Drain & Spin (vidange et essorage)	23
Extra Rinse (rinçage supplémentaire)	23
Fabric Softener (assouplissant de tissu)	23
Pre Soak (prétrempage) (sur certains modèles)	23
Volume du signal de fin de programme	23
Changement des programmes, modificateurs et options	24
Un bref signal sonore marque le choix d'un changement.	24
Trois brefs signaux sonores marquent le choix d'une combinaison non disponible. La dernière sélection ne sera pas acceptée.	24
1. Appuyer deux fois sur PAUSE/CANCEL (pause/annulation) pour annuler le programme. La laveuse effectuera une vidange.	24
2. Appuyer sur POWER (alimentation).	24
3. Sélectionner le programme de lavage désiré.	24
4. Sélectionner les modificateurs et options désirés.	24
5. Appuyer sur START (mise en marche).	24
Changement des modificateurs et options après avoir appuyé sur Start	24
Il est possible de changer un modificateur ou une option à tout moment après avoir sélectionné Start et avant que le modificateur ou l'option choisi(e) ne commence.	24
1. Appuyer deux fois sur PAUSE/CANCEL (pause/annulation) pour annuler le programme de lavage et vidanger la laveuse.	24
2. Appuyer sur POWER (alimentation).	24
3. Tourner le bouton pour sélectionner DRAIN & SPIN (vidange et essorage).	24
4. Appuyer sur START (mise en marche).	24

Match case Limit results 1 per page

Use & Care Guide

For questions about features, operation/performance, parts,

accessories, or service, call:

1-800-253-1301

or visit our website at...

www.whirlpool.com

In Canada, call:

1-800-807-6777

or visit our website at...

www.whirlpool.ca

UICK

TART

UIDE

............

. 5

Para una versión en español, visite:

www.whirlpool.com

Número de pieza W10240443A

Guide d’utilisation et d’entretien

Pour assistance, installation, ou service, composez le :

1-800-807-6777

ou visitez notre site internet à..

www.whirlpool.ca

UIDE

MARRAGE

RAPIDE

....

. 19

TABLE OF CONTENTS

Page

ASSISTANCE OR SERVICE

........................................................................

WASHER SAFETY

.......................................................................................

BENEFITS AND FEATURES

.......................................................................

QUICK START GUIDE/WASHER USE

.......................................................

Starting Your Washer

................................................................................

Cycles

.......................................................................................................

Additional Features

...................................................................................

Modifiers

...................................................................................................

Options

......................................................................................................

Changing Cycles, Modifiers, and Options

................................................

Normal Sounds

.........................................................................................

LAUNDRY TIPS

..........................................................................................

WASHER CARE

.........................................................................................

Cleaning Your Washer

............................................................................

Water Inlet Hoses

....................................................................................

Vacation, Storage, and Moving Care

.....................................................

TROUBLESHOOTING

...............................................................................

Washer and Components

.......................................................................

Washer Operation

..................................................................................

Clothing Care

..........................................................................................

WARRANTY

...............................................................................................

TABLE DES MATIÈRES

Page

ASSISTANCE OU SERVICE

......................................................................

SÉCURITÉ DE LA LAVEUSE

....................................................................

AVANTAGES ET CARACTÉRISTIQUES

..................................................

GUIDE DE DÉMARRAGE RAPIDE/UTILISATION DE LA LAVEUSE

.....

Mise en marche de la laveuse

................................................................

Programmes

...........................................................................................

Caractéristiques supplémentaires

..........................................................

Modificateurs

..........................................................................................

Options

...................................................................................................

Changement des programmes,

modificateurs et options

.........................................................................

Sons normaux

.........................................................................................

CONSEILS DE LESSIVAGE

......................................................................

ENTRETIEN DE LA LAVEUSE

..................................................................

Nettoyage de la laveuse

.........................................................................

Tuyaux d'arrivée d'eau

...........................................................................

Précautions à prendre avant les vacances, un entreposage ou un

déménagement

.......................................................................................

DÉPANNAGE

.............................................................................................

La laveuse et ses composants

...............................................................

Fonctionnement de la laveuse

..............................................................

Soin des vêtements

................................................................................

GARANTIE

..................................................................................................

W10240442A

W10240443A - SP

CABRIO™

AUTOMATIC WASHER

LAVEUSE

AUTOMATIQUE CABRIO™