Whirlpool WTW6700TU Use and Care Guide - Page 4
Installation Requirements - washer
UPC - 883049141275
View all Whirlpool WTW6700TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. The parts supplied are in the washer basket. Tools needed for connecting the drain hose and water inlet hoses: ■ Pliers that open to 1 3.95 cm) ■ Flashlight (optional) NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference. Parts supplied: Alternate Parts Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the "Assistance or Service" section. If You Have: You Will Need to Buy: Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) 1" (2.5 cm) diameter standpipe 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 3363920 and connector kit Part Number 285835 Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall drain tub or utility sink, sump pump and connectors (available from local plumbing suppliers) A B C Floor drain Siphon break, Part Number 285834; additional drain hose, Part Number 8318155 and connector kit, Part Number 285835 Water faucets 2 longer water fill hoses: beyond reach of fill 6 ft (1.8 m) Part Number 76314, hoses 10 ft (3.0 m) Part Number 350008 Lint clogged drain Drain protector, Part Number 367031 D A. Drain hose form B. Water inlet hoses (2) C. Flat water inlet hose washers (4) D. Beaded tie strap Tools needed for securing the drain hose and leveling the washer: ■ Adjustable or open end wrench 14 mm) ■ Level ■ Wood block ■ Ruler or measuring tape 4