Xerox 3600DN Phaser 3600 Machine Firmware Installation Instructions USB Instal

How to upgrade by using the firmware upgrade utility

1.

Connect USB cable to both the printer and PC.

2.

Download the firmware file (w/bundled extraction utility) from Xerox support web site to

your PC.

3.

Double-click the upgrade utility (*.exe) and then the following message appears.

Note:

Only USB upgrades are supported with this tool, not Network. Use CentreWare IS

for network upgrades.

4.

Select

Local(USB)

and Click

F/W Update

.

5.

Machine LCD will Display "FLASH UPGRADE..." message for about 1 minute.

6.

Machine LCD will then Display below message for about 5 minutes.

Update Image

Please Wait...

7.

Select OK on screen to close this window. Wait till machine reboots automatically.