Xerox 850DX FreeFlow Accxes 10.3.3 Customer Release Notes - Page 20

8.2 Xerox 6030/6050 Wide Format Solution 8.2.1 Long Plotting Long plot limits are dependent on the amount of memory in the 6030/6050. Limits are as follows: Amount of Memory Installed Long Plot Limit 256 MB 3,000 mm 512 MB 7,500 mm 1 GB 15,000 mm If the maximum plot length in AccXES (in WebPMT: PRINTER DEFAULTS>PROCESSING DEFAULTS>MEDIA>MAXIMUM PLOT LENGTH) is set greater than the maximum length of the 6030/6050 the image will be truncated. 8.2.2 Long Copying Copy documents should be limited to the maximum length printed by the 6030/6050 printer. If longer documents are used the printer may not print them correctly and may hang. Canceling a long copy job may require a very long time to complete or may hang the system requiring it to be rebooted. 8.2.3 Out of Toner reported as "printer needs attention" When the 6030/6050 printer runs out of toner the error message presented in WebPMT is simply "printer needs attention". The user needs to refer to the printer user interface to determine the problem resolution required. 8.3 Scanner 8.3.1 Clear Last Image When the "Clear Last Image" feature is selected on the Xerox Wide Format Scan System, it may take a few minutes for a Photo or Color mode scanned document to clear out. After scanning a document, this feature is accessed by selecting the "C" key on the scanner. It will bring up the "CLEAR SCANNED IMAGE" screen. Use the "Next" button to select "CLEAR LAST IMAGE", and then press "ENTER". 8.3.2 Invert Feature and Recall Last Job Scan a document. Press the Transform key. Select "Recall Last Job". If the Invert feature (changes dark to light and vice versa) is selected before printing the recalled document, the document will not be inverted. It will need to be rescanned to get the inverted image. Page 20