Xerox 8860MFP User Guide - Page 106
Using the Prescan Glass Option, Reducing or Enlarging the Image, Reduce/Enlarge
UPC - 095205735574
View all Xerox 8860MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Adjusting Copying Options Using the Prescan Glass Option When using the document glass, you can prescan originals when using the auto center, edge erase, auto reduce/enlarge, and poster options. To select a prescan setting: 1. On the control panel, press the Copy button. 2. Select Prescan Glass, and then press the OK button. 3. Select one of the following options: ■ Off: Turns off prescanning. Select an original size for your copy. ■ On: Turns on prescanning when any of the auto center, edge erase, auto reduce/enlarge, and poster options are turned on. When all these options are turned off, the copy area is calculated based on the current paper supply size. Note: The book copy option always prescans. See also: Selecting an Original Size on page 4-8 Reducing or Enlarging the Image You can reduce the image to 25% of its original size or enlarge it to 400% of its original size. To use reduce or enlarge the image: 1. On the control panel, press the Copy button. 2. Select one of the following options: ■ Select Preset Reduce/Enlarge, and then press the OK button. A list of preset values appears from which you can select the size of the original followed by the size of the copy paper. ■ Press the Reduce/Enlarge cascade button on the control panel to select these options: ■ Auto: Reduces or enlarges the image as needed to fit the full size of the copy paper. ■ 25%-400%: Reduces or enlarges the image by a selected percentage: 25, 50, 100, 150, 200, and 400. ■ Press the up or down button below the three-digit LED to reduce or enlarge the copy size in increments of one percent. 100% keeps the copy image the same size as the original. Note: The factory default is 100%. Phaser® 8560MFP/8860MFP Multifunction Printer 4-9