Xerox 8860MFP User Guide - Page 195
Eliminate Light Stripes, Waste Tray Full
UPC - 095205735574
View all Xerox 8860MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Maintenance and Cleaning 2. Pull the waste tray (labeled B) completely out of the system. Warning: The waste tray may be hot; handle it carefully. 8860mfp-056 Note: The waste tray may be locked if the system is in a warm-up cycle or if the ink is cooling following the Eliminate Light Stripes troubleshooting routine. If the tray is locked, close the door and wait 15 minutes before repeating Steps 1 and 2. 3. Empty the waste tray in a waste container. The ink is non-toxic and can be discarded as normal office waste. 8860mfp-057 Note: The waste tray must be out of the system for more than five seconds or you will continue to receive a Waste Tray Full message on the control panel. Phaser® 8560MFP/8860MFP Multifunction Printer 8-6
Maintenance and Cleaning
Phaser® 8560MFP/8860MFP Multifunction Printer
8-6
2.
Pull the waste tray (labeled
B
) completely out of the system.
Warning:
The waste tray may be hot; handle it carefully.
Note:
The waste tray may be locked if the system is in a warm-up cycle or if the ink is
cooling following the
Eliminate Light Stripes
troubleshooting routine. If the tray is
locked, close the door and wait 15 minutes before repeating Steps 1 and 2.
3.
Empty the waste tray in a waste container. The ink is non-toxic and can be discarded as
normal office waste.
Note:
The waste tray must be out of the system for more than five seconds or you will
continue to receive a
Waste Tray Full
message on the control panel.
8860mfp-056
8860mfp-057