Xerox 8860MFP User Guide - Page 220
Shutdown for Moving System, minutes
UPC - 095205735574
View all Xerox 8860MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Moving and Repacking the Printer 3. Turn the scanhead transportation lock clockwise to lock the scanhead. Caution: Scanhead damage can occur if the lock is not fully tightened. 8860mfp-131 4. Wait for the system to complete the cool-down period for the ink to solidify. The fan shuts down when it is cool enough to move the system. Caution: If you turn off the system but do not select Shutdown for Moving System on the control panel, the fan does not run, so you must wait longer for the ink to solidify. Wait at least 30 minutes for the system to cool completely before moving or packing it. 5. Unplug the system after the cool-down cycle is complete. Phaser® 8560MFP/8860MFP Multifunction Printer 8-31
Moving and Repacking the Printer
Phaser® 8560MFP/8860MFP Multifunction Printer
8-31
3.
Turn the scanhead transportation lock clockwise to lock the scanhead.
Caution:
Scanhead damage can occur if the lock is not fully tightened.
4.
Wait for the system to complete the cool-down period for the ink to solidify. The fan shuts
down when it is cool enough to move the system.
Caution:
If you turn off the system but do not select
Shutdown for Moving System
on
the control panel, the fan does not run, so you must wait longer for the ink to solidify. Wait
at least
30 minutes
for the system to cool completely before moving or packing it.
5.
Unplug the system after the cool-down cycle is complete.
8860mfp-131