Xerox D1015 User Manual

Xerox D1015 Manual

Get Xerox D1015 PDF manuals and user guides View all Xerox D1015 manuals
Add to My Manuals
Save this manual to your list of manuals

Xerox D1015 manual content summary:

  • Xerox D1015 | User Manual - Page 1
    Disc Duplicator User Guide Version x.10 Xerox Disc Duplicator User Guide
  • Xerox D1015 | User Manual - Page 2
  • Xerox D1015 | User Manual - Page 3
    LCD Front Panel 15 Tutorial Guide 16 Making Disc-to-Disc Copies 16 Making Hard Drive-to-Disc Copies 22 Loading a CD-ROM/DVD Master onto the Hard Drive 23 Loading a Master Disc Image from the Computer 27 How to make a Copy from the Hard Drive 29 How to Select the Duplication Speed 35
  • Xerox D1015 | User Manual - Page 4
    instructions carefully before operating the machine and refer to them as needed to ensure the continued safe operation of your machine. Your Xerox have been verified using Xerox materials only. WARNING: Xerox representative for more information. Marks, Labels Symbols All warnings and instructions
  • Xerox D1015 | User Manual - Page 5
    installed and used in accordance with the instructions, may cause harmful interference to radio communications 15 Section 15.21) Changes or modifications to this equipment not specifically approved by the Xerox Corporation may void the user's authority to operate this equipment. 5 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 6
    Xerox Xerox equipment, follow these safety guidelines at all times: Do These ■ Always follow all warnings and instructions support surface (not on plush carpet) that has adequate strength to support the fastened with screws. There are no operator serviceable areas within these covers. ■ Never locate
  • Xerox D1015 | User Manual - Page 7
    an outlet is correctly grounded, consult an electrician. 5. Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground connection terminal. 6. Do not place this equipment . If in doubt, have the outlet checked by a qualified electrician. 7 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 8
    the electrical outlet(s). Contact an authorized Xerox Service Representative to correct the problem: ■ The equipment emits unusual odors manual. ■ Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that you can maintain or service. Xerox Duplicator
  • Xerox D1015 | User Manual - Page 9
    Approximation of the laws of the member states related to low voltage equipment. 2004/108/EC December 15, 2004 Council Directive 2004/108/EC as amended. Approximation of the laws of the member states ISM equipment may have to be limited or special mitigation measures taken. 9 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 10
    EU member states may return used electrical and electronic equipment to designated collection facilities free of charge. Please contact your local disposal authority for information. Xerox Duplicator 10
  • Xerox D1015 | User Manual - Page 11
    following customer help lines: USA: 1-800 828-6571 Canada: 1-800 828-6571 Europe: +44 1707 353 434 www.xerox.com/about-xerox/environment/enus.html (Product Safety information for US) www.xerox.com/about-xerox/environment/eneu.html (Product Safety information for EU) 11 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 12
    The Xerox CD/DVD Duplicator is a reliable, high performance, high speed, standalone manual tower duplicator. With its professional industrial design and simple beginner user interface, it will make your duplicating experience easier than ever. Before You Start Before using this duplicator, read
  • Xerox D1015 | User Manual - Page 13
    in your duplicator. Please take this into consideration when using this manual. Notice: If you purchased a Xerox Duplicator with Blu-ray drives, the operation instructions for your unit will mirror those contained in this user manual for the CD and DVD duplication procedures. 13 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 14
    and display found on the Xerox Duplicator. Actual size will vary based upon the model you purchase. 6 5 3 4 8 11 10 2 9 7 12 1 Figure 1-1 CD/DVD Duplicator Controls and Display The components shown in Figure 1-1 are: 1. Power Button 2. CD/DVD Writers 3. CD/DVD Reader 4. Eject Button 5. Keypad
  • Xerox D1015 | User Manual - Page 15
    Panel Figure 1-2 shows the front panel for the duplicator. Figure 1-2 Front Panel Table 1-1 Control Front Panel you to the Test menu and automatically performs the Test action. Shortcut key to change the duplication speed. Pressing the shortcut key takes you to the Speed menu and allows you to
  • Xerox D1015 | User Manual - Page 16
    used when the reader drive is either bad or unable to read the disc master. Selecting the Copy Source When you turn on your duplicator, after it has booted up, you should see the following signifying your duplicator is ready. XEROX 1.Copy 2.14 Step 1: Use the up or down arrow buttons to navigate
  • Xerox D1015 | User Manual - Page 17
    . XEROX 1.Copy 2.14 Step 2: Press the >> button to enter the Copy menu. You should then see the Counter Selection menu. Counter: No Counter The Counter Selection menu will let you choose how many copies you want to make for your project. This Counter Selection feature allows the duplicator to
  • Xerox D1015 | User Manual - Page 18
    Master or Preparing Waiting for Blanks Note: If either one of the above two screens is displayed for more than two minutes, check your master disc or blank discs for quality. Xerox Duplicator 18
  • Xerox D1015 | User Manual - Page 19
    processing screen will appear. Processing Please Wait If the number of blank discs you inserted does not match the number of discs detected on the screen, allow 10 to 15 seconds for the duplicator to recognize all of your blank discs. Step 4: After two to three seconds of processing time, one of the
  • Xerox D1015 | User Manual - Page 20
    % for approximately 30 seconds for CD duplication and up to 1 minute for DVD duplication. That is caused by the initializing and finalizing stages. Once the duplication run is completed, the successful , you should see the following screen. 21 Discs Copied Press OK to Finish Xerox Duplicator 20
  • Xerox D1015 | User Manual - Page 21
    what you need. You can continue to copy or you can eject the extras. Note: If you happen to have any failed discs (bad copies), the failed disc(s) will not be ejected automatically. You need to manually eject them and throw them away if they are writeonce recordable disc(s). 21 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 22
    from one of two ways: ■ It can be loaded into a disc image by reading the master disc from one of the CD-ROM/DVD drives (usually the reader Drive) ■ It can be written to the duplicator from an external PC over the USB connection. Note: The Xerox Duplicator USB Installation Utility must be installed
  • Xerox D1015 | User Manual - Page 23
    duplicator have a .VEF extension. Master disc images that were loaded directly to the duplicator's hard drive from a PC have a .ISO extension. Loading a CD-ROM/DVD Master onto the Hard Drive When you turn on your duplicator to navigate to the following screen. XEROX 2.14 8.Select Source Step 2:
  • Xerox D1015 | User Manual - Page 24
    total capacity of your hard drive in terms of Gigabytes. You now have a choice to load your master disc into a new (empty) partition or overwrite one of the existing partitions (if any exists, including reserved the character and use >> or
  • Xerox D1015 | User Manual - Page 25
    >>. For example, if you want to name the partition for your master disc as FUN. Make sure the cursor is located at the first position Edit Partition Press the >> button to confirm. Once your master disc has been recognized. The loading progress indicator will be displayed and you should now
  • Xerox D1015 | User Manual - Page 26
    is being loaded. ■ 10% indicates the current percentage of the master disc that has been loaded. Once your master disc has been loaded completely, you should see the following screen. Load Partition menu. You should see the following screen. XEROX 2.14 10. Hard Drive Setup Xerox Duplicator 26
  • Xerox D1015 | User Manual - Page 27
    Image from the Computer To load a master disc image from the computer. Step 1: Follow the instructions outlined in "Accessing the Hard Drive on the Duplicator" on page 72. Once you have established a connection between the computer and the duplicator, you should be able to open the hard drive on
  • Xerox D1015 | User Manual - Page 28
    's hard disk, you must return control of the hard disk to the duplicator. Use the up or down arrow buttons to navigate to the Setup screen. XEROX 12. Setup 2.14 Step 5: Press >> to enter Setup menu and you should see the following screen. Setup 1. Language Step 6: Using the up or down arrow
  • Xerox D1015 | User Manual - Page 29
    to navigate to the following screen. XEROX 2.14 8.Select Source Step 2: Press you should see the following screen. XEROX 2.14 8.Select Source Step 4: Go back to the following screen. XEROX 1. Copy 2.14 Step 5: Start the Copying Process Insert your blank discs into the writer
  • Xerox D1015 | User Manual - Page 30
    choose how many copies you want to make for your project. This counter selection feature will allow the duplicator to count the number of copies you have made and prompt you when the desired number of copies 0s are skipped, therefore, 0010 means 10, which is the number ten. Xerox Duplicator 30
  • Xerox D1015 | User Manual - Page 31
    is displayed for more than two minutes, check your blank discs for quality. Step 8: Allow 5 to 10 seconds for the duplicator to detect your hard drive partition and blank discs as well. After your hard drive partition and blank discs have been recognized, then you should see the following screen
  • Xerox D1015 | User Manual - Page 32
    following screen will appear. Processing Please Wait If the number of blank discs you inserted does not match the number of discs detected on the screen, allow 10-15 seconds for the duplicator to recognize all of your blank discs. Step 9: After 2 or 3 seconds of processing time, one of the following
  • Xerox D1015 | User Manual - Page 33
    master disc. ■ 481MB indicates the current MB from the master disc that has been copied. ■ 12% indicates the current progress of the duplication. ■ CD duplication and up to 1 minute for DVD duplication. That is caused by the initializing and finalizing stages. Once the duplication Xerox Duplicator
  • Xerox D1015 | User Manual - Page 34
    you need. You can continue to copy or you can eject the extras. Note: If you happen to have any failed discs (bad copies), the failed disc(s) will not be ejected automatically. You will need to manually eject them and throw them away if they are writeonce recordable disc(s) Xerox Duplicator 34
  • Xerox D1015 | User Manual - Page 35
    to enter into Speed Selection menu. You should see the following screen. Select Burn Speed CD to CD Select the Duplication Speed Type There are different types of recording speeds. ■ HDD/CD to CD. Copying to CD-R/RW media from pre-loaded CD partitions or original CD media. 35 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 36
    then press >> to submit your speed selection. Step 3: Once your selection has been changed successfully, you should see the following screen for two seconds. DVD to DVD Speed: Adjusted to:8x You will then be directed back to the Main menu. XEROX 2.14 7. Select Burn Speed Xerox Duplicator 36
  • Xerox D1015 | User Manual - Page 37
    you create a partition by either loading your master disc to the hard drive partition, or loading a arrow button to navigate to the following screen. XEROX 2.14 10. Hard Drive Setup Step 2: a drive on the duplicator. Partitions that were loaded directly to the duplicator's hard drive from
  • Xerox D1015 | User Manual - Page 38
    , you should see the following screen. [FUN2.VEF] Renamed! You will then be directed back to Hard Drive Setup menu. Hard Drive Setup 3. Rename Partition Xerox Duplicator 38
  • Xerox D1015 | User Manual - Page 39
    instructions outlined in "Accessing the Hard Drive on the Duplicator" on page 72. Once you have established a connection between the computer and the duplicator see the contents of the duplicator's hard drive: Step 3: To rename one of the files (partitions) on the duplicator's hard dive, right-click
  • Xerox D1015 | User Manual - Page 40
    Step 4: You must then return control of the hard disk to the duplicator. Use the up or down arrow buttons to navigate to the Setup screen. XEROX 12. Setup 2.14 Step 5: Press >> to enter Setup menu and you should see the following screen. Setup 1. Language Step 6: Using the up or down arrow
  • Xerox D1015 | User Manual - Page 41
    following screen for 2 seconds. Partition [FUN.VEF] Deleted Then, you will be directed back to Hard Drive Setup menu. Hard Drive Setup 4. Delete Partition 41 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 42
    how to modify the Auto Start setting. Note that the default setup is set for optimal performance of the duplicator; it is unnecessary to change if you are satisfied with the outcome. Step 1: Use the up or to Step 3. Otherwise, press
  • Xerox D1015 | User Manual - Page 43
    that you have inserted and after you have finished, you will be instructed to finalize the CD-R disc. When you turn on your duplicator, after it has booted up, you should see the following signifying your duplicator is ready. XEROX 1. Copy 2.14 Step 1: Go to the Edit Audio Track menu. Press the
  • Xerox D1015 | User Manual - Page 44
    into the hard drive. After you have selected all of your favorite songs, you will be instructed to copy them onto a blank 80 minute CD-R disc. ■ Blank CD-R Media. By choosing a blank CD-R as the temporary storage location, you will be instructed to copy all of your favorite songs into the blank
  • Xerox D1015 | User Manual - Page 45
    The last track selected will be lost, and you can either select a smaller track or finalize the disc selection as described in Step 3. Once the copying process is complete, you should see the following screen. it (mark the completion) or insert another audio CD for more songs. 45 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 46
    26m:17s Insert Next Master? Then, press the >> button to continue. After that, your old master disc will be ejected and you can insert another audio CD into the Reading tray. Go back and follow the instructions in Step 3. If you choose to finalize it, you need to press the down arrow button
  • Xerox D1015 | User Manual - Page 47
    Tracks to a blank disc, we will create a new audio CD from two different discs. ■ CD1: Song 2, and song 4 ■ CD2: Song 3, song 4 and song 5 Step 1: Go to function 11, Edit Audio Tracks. XEROX 2.14 11. Edit Audio >> to confirm. A "*" symbol will appear on the left of Track 4. 47 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 48
    "Track 3" on the second line, and then press >> to confirm. A "*" symbol will appear to the left of Track 3. Total: 3 Trk *Track 3: 14m:35s 4m:47s Xerox Duplicator 48
  • Xerox D1015 | User Manual - Page 49
    following screen. Total: 5 Trk 24m:29s Are You Done? Step 15: Press >> Once you submit your selection, you should see following screen. Audio Editing 3 4m:47s Step 16: Once the loading process to the CD is complete, you should see following screen. Total: 5 Trk 24m:29s Finish
  • Xerox D1015 | User Manual - Page 50
    the >> button, you will then be directed back to the Main menu XEROX 2.14 11. Edit Audio Tracks Introduction to the Account Management Feature This by default. Prior to activating the "Account Management" feature, the duplicator recognizes all users as the only activated user defined as the
  • Xerox D1015 | User Manual - Page 51
    . After you have entered the password, you will need to press >> on OK to submit your password. Once your password is validated, you will be guided to the main Manage Accounts screen as follows. Manage Accounts 1. View User 51 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 52
    to change the password for this account. User names can consist of maximum eight alphanumeric letters or numbers. User passwords can consist of four numbers. Xerox Duplicator 52
  • Xerox D1015 | User Manual - Page 53
    the simplest way to make CD/DVD copies. The following steps will show you how to use this feature. Step 1: Use the up or down arrow button to navigate to the following screen. Another alternative to access the Autocopy feature is by pressing the "Copy" shortcut key. XEROX 15. AutoCopy 2.14 Step
  • Xerox D1015 | User Manual - Page 54
    Allow 5-10 seconds for the duplicator to detect your master and blank discs. After your master and blank discs have been recognized, then you should for CD duplication and up to 1 minute for DVD duplication. This is caused by the initializing and finalizing stages. Step 6: Once the duplication run
  • Xerox D1015 | User Manual - Page 55
    master disc prior to loading any new blank discs into the Writer Trays. Note: If you have a failed disc(s) (bad copies), the failed disc(s) will not be ejected automatically. You will need to manually eject the disc(s) and discard them if they are write once recordable disc(s) 55 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 56
    page 22. ■ Test. This menu will guide you to make simulation of copying process. During this simulation process, all write once recordable discs such as (DVD-R, CD-R) will be reusable. The purpose of performing such simulation is to ensure error free duplication. Note: Due to the physical limitation
  • Xerox D1015 | User Manual - Page 57
    disc, not the data section. ■ Hard Drive Setup. This menu will guide CDs into a single customize audio CD. For more information, refer to "Audio CD Editing" on page 43. ■ Setup ■ Language. This setting will allow you to choose which language you prefer to navigate this duplicator. Current supported
  • Xerox D1015 | User Manual - Page 58
    . The "On the Fly" mode instructs the duplicator to copy directly from the master disc. When using "On the Fly" DVD Video players. This process will increase the amount of time required to duplicate your disc(s). ■ ISRC. This option will allow you to enable/disable copying ISRC code of the Audio CD
  • Xerox D1015 | User Manual - Page 59
    the back of your duplicator. In addition, this CD Overburn: Overburning is the process of recording data past the normal size limit. Many disc manufacturers extend a recordable disc duplicator are caused by errors in the master disc devices built inside your duplicator. That information includes but
  • Xerox D1015 | User Manual - Page 60
    entered and makes sure it is safe to turn off your duplicator. Once you see the "Ready to Power OFF" message, then you can safely turn off the machine via Power Switch. Turning off your duplicator without perform this function will increase the risk of damaging your duplicator. Xerox Duplicator 60
  • Xerox D1015 | User Manual - Page 61
    Chapter 3: Troubleshooting Trouble Shooting Follow these instructions when the duplicator is not working properly. such problems. ■ Use another DVD/CD player/ROM to test the copied media. Sometimes, your DVD/CD Player/ROM may not be compatible with recordable DVD/CD disc. 61 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 62
    . 8. Why some writers won't copy. ■ Reset back to default (Troubleshoot item #9). ■ Contact our Tech Support. 9. How do I reset my duplicator back to default? ■ Use up or down arrow button to navigate to the following screen. XEROX 13. Utility 2.14 ■ Press >> to enter Utility menu and you should
  • Xerox D1015 | User Manual - Page 63
    model/version. They are required to be identical for proper duplication. Contact Tech Support for assistance. Targets & Master Not Compatible The master disc is a different format than the blank disc(s). The format between the master disc and blank must be the same. Targets Not Blank The
  • Xerox D1015 | User Manual - Page 64
    disc. Bad Discs The blank media you are using are not being recognized by the writers. Format Cannot Be Tested The blank media you've inserted does not support test function. You need to either use CD-R or DVD the hard drive is bad. Contact Tech Support for assistance. Xerox Duplicator 64
  • Xerox D1015 | User Manual - Page 65
    system firmware update. Contact Tech Support for assistance. The update file you are trying to update is not compatible for your system. This is a system error during the system firmware update. Contact Tech Support for assistance. The system has acknowledged the abort command. 65 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 66
    on the Installation CD. Copy it down before inserting the CD into the CD-ROM drive. Step 1: Insert the Installation CD into the computer's CD-ROM drive Step 2: Using the "My Computer" icon or Windows Explorer, click on the CD drive. Step 3: Double-click Setup.exe Icon as shown: Xerox Duplicator 66
  • Xerox D1015 | User Manual - Page 67
    Step 4: Follow the Installation Wizard to complete the installation process. Step 5: When promoted, enter your User Information. The serial number is printed on the installation disc. 67 Xerox Duplicator
  • Xerox D1015 | User Manual - Page 68
    Step 6: When you have completed all of the installation steps, you will see the Completing the USB Driver Utility v1.1 Setup Wizard window: Step 7: Restart your PC to complete the installation. Xerox Duplicator 68
  • Xerox D1015 | User Manual - Page 69
    System Utility: When using for File System Utility for the first time: Step 1: Power On the duplicator and your PC. XEROX 1.Copy 2.14 Step 2: Use the up or down arrow buttons to navigate to the following screen. XEROX 12. Setup 2.14 Step 3: Press >> to enter Setup menu and you should see the
  • Xerox D1015 | User Manual - Page 70
    Start button and using the command sequence Start: Programs: Xerox Utility: Xerox File System Manager. You should see the Xerox File System Manager main window appear: Step 9: The Xerox File System Manager automatically assigns the duplicator hard disk drive to the first available free drive letter.
  • Xerox D1015 | User Manual - Page 71
    and click the OK button to exit. Step 11:Your PC should now have a Drive Partition ready to access: When using the duplicator again after completing the above steps on the same PC: Step 1: Power on the duplicator and your PC. Step 2: Turn on the "USB Connection" setting under "Setup" on the
  • Xerox D1015 | User Manual - Page 72
    . Creating an ISO DVD/CD Image file In order to create an ISO DVD/CD Image file, you must install an ISO DVD/ CD Image File Creation Utility. An example of this is the free program ImgBurn (go to http://www.imgburn.com for more information). To install the ImgBurn program: Xerox Duplicator 72
  • Xerox D1015 | User Manual - Page 73
    . Note: These instructions are for the 2.4.0.0 release of ImgBurn, and may need to be modified if you are installing a later version. Step 5: Follow Installation Wizard to complete the installation process. To create an ISO DVD/CD Image File from a CD/DVD disc to the duplicator's hard drive using
  • Xerox D1015 | User Manual - Page 74
    For more information, call 1-800-571-9767 or visit us at www.xeroxduplicators.com Xerox® is a trademark of Xerox Corporation in the US and/or other countries and is used under license.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Xerox Disc Duplicator
User Guide
Disc Duplicator
User Guide
Version x.10