Xerox F110MB Installation Guide
Xerox F110MB Manual
 |
View all Xerox F110MB manuals
Add to My Manuals
Save this manual to your list of manuals |
Xerox F110MB manual content summary:
- Xerox F110MB | Installation Guide - Page 1
be ready to make copies or receive faxes, you must load paper into the machine. Use paper letter, 8.5 x 11 Inch (216 × 279 millimetres). Your machine works with normal copier paper and with typewriter paper (0.13 - 0,2 lb/m2) (see user manual chapter Installation / Paper). Cover 1 Separate the - Xerox F110MB | Installation Guide - Page 2
hold of both document guides and tipping the cover backward. ÆOnce you have removed the protection strip, do not shake the print cartridge any more. Otherwise, it is possible that toner dust will be released into the air. 6 Place the print cartridge into your machine. The cartridge should snap - Xerox F110MB | Installation Guide - Page 3
machine and designated by the word LINE. Insert the telephone plug into your PTT line outlet. Entering Your Telephone Number and Name 1 Enter your fax time (see user manual chapter Settings). Setting the Country It is essential to select the country because otherwise your machine will not have - Xerox F110MB | Installation Guide - Page 4
your computer and add or edit entries. You can also alter your machine settings as well as checking the toner level of the print cartridge. With P P, you can scan and manage documents. The machine is registered as the default printer on your computer. You can access it as you would any other
-
1 -
2 -
3 -
4
 |
 |
Installation Guide
Loading Paper
Before your machine will be ready to make
copies or receive faxes, you must load paper
into the machine. Use paper
letter
, 8.5 x 11
Inch (216 × 279 millimetres). Your machine
works with normal copier paper and with
typewriter paper (
0.13 – 0,2 lb
/m
2
) (see
user manual chapter
Installation
/ Paper).
1
Separate the paper sheets by fanning
them out, then align them by tap-
ping edge of the stack lightly against
a flat surface. °is will prevent several
sheets of paper from being drawn in
all at once.
2
Remove the cover from the paper tray.
Put in only as much paper as will fit
under the raised limit markers on the
upper edge of the paper input tray
(see also the drawings on the cover
of the paper input tray). You can load
up to 250 sheets into the paper input
tray.
Document Output
Tray
Insert the document output tray into the
two openings under the operation panel.
Document Input Tray
Insert the document input tray into the
two openings in the cover. °e document
support should snap securely into place.
Paper Output Tray
Pull the paper output tray out of the paper
tray cover.
Document input tray
Document guide
Document feed slot
Operation panel
with LCD display
Document
output tray
Paper output tray
(extendable)
Paper input tray
Opening for
Plug’n’Print card
Cover
3
Press the paper down until the lever
(
A
) snaps into place at the rear of the
paper input tray.
4
Place the cover back on the paper input
tray. Push the paper input tray into the
machine all the way to the stopping point.