Xerox P8EX DocuColor 8000/7000 Decurler Adjustment procedure
Xerox P8EX - DocuPrint B/W Laser Printer Manual
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Xerox P8EX manual content summary:
- Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 1
Version 1.0 April 2007 DocuColor 8000/7000 Decurler Adjustment - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 2
Corporation Global Knowledge & Language Services 800 Phillips Road Building 845 Webster, New York 14580 ©Copyright 2007 by Xerox Corporation. All Rights Reserved. Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by statutory or judicial - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 3
Decurler E Table Settings examples 22 Decurler E Table Settings example 1 22 Decurler E Table Settings example 2 30 Decurler E Table Settings example 3 38 DocuColor 8000/7000 System Administration Guide i - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 4
Tab l e o f Co nt en ts ii DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 5
is loaded in the tray. Make sure you load the paper as instructed on the ream wrapper. • The atmospheric conditions of the room where Type A, B, C, and D settings: Preset Decurler settings, which are manually selected as an alternative to the System Default setting. See "Decurler Paper Guide 1-1 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 6
Decurler E Table settings are based on job type and percentage of toner area coverage. These settings are manually entered. See "Decurler E Table Settings" on page 9. KEY POINT: If a Decurler profile setting is upward and downward Decurler arms. 1-2 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 7
Paper Type A-D Profile Settings usually eliminates the problem. However, due to the broad range of paper Materials List (RML) for your digital press: • To determine if Xerox has tested your paper type and weight • View the recommended Decurler Paper 8000/7000 System Administration Guide 1-3 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 8
Paper Type A, B, C, and D do not correct curl, you can use the Decurler E Table Settings, See "Decurler E Table Settings" on page 9. 1-4 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 9
Administrator password. NOTE: The default Administrator password is 11111. This password may be changed to fit your needs. c. Press Enter. DocuColor 8000/7000 System Administration Guide 1-5 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 10
1. Decurler Adjustment 2. The Pathway Option screen opens. Select the Tools Pathway button. 3. From the Tools Mode window, press: a. Machine Defaults 2 tab. b. Decurler Setup button. 1-6 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 11
, if the system automatically selected Type B and you changed it to Type C, the system will return the setting to Type B. DocuColor 8000/7000 System Administration Guide 1-7 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 12
.com web site and refer to the latest Recommended Materials List (RML) for your digital press: • To determine if Xerox has tested your paper type and weight • View the recommended Decurler Paper Type A - D settings for particular paper types. 1-8 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 13
do not have access to an application's tools, which measure percentage of toner area coverage, make your estimate using the following examples as a guide. Your estimates will be used when entering Decurler E Table Settings values, which is explained later in this section. Percentage of Toner Area - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 14
lookup tables for curl control that are based on the job's toner area coverage and the printer's humidity values, only. DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 15
curl selections in the Lower and Upper fields of the Decurler E Table Settings Type E window. KEY POINT: Paper that is curled upwards is adjusted using the Upper values. Paper that guide when determining if your curl is Light, Medium, or Heavy. DocuColor 8000/7000 System Administration Guide 1 - 11 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 16
understand that when entering percentage of toner area coverage values within the Decurler E Table Settings Type E window that the maximum allowed entry is 100%. When determining what values to enter, do not total 28.1% Cyan 23.8% Yellow 29.5% DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 17
Within the Decurler E Table Settings Type E window, you must enter Decurler values in ascending or descending order. In the following example, 100% was followed by 80% and 90%, respectively. The correct sequence would need to be 100%, followed by 90% and then 80%. KEY POINT: It is important to - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 18
1. Decurler Adjustment Values entered incorrectly: 0%, 0%, 0%, 90%, 80%, 100% Values entered correctly: 0%, 0%, 0%, 80%, 90%, 100%. 1-14 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 19
: 1. At the controller, logon to the Tools menu as Administrator. a. Press the Access button. b. Enter the Administrator password. c. Press Enter. DocuColor 8000/7000 System Administration Guide 1-15 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 20
1. Decurler Adjustment 2. The Pathway Option screen opens. Select the Tools Pathway button. 3. From the Tools Mode window, press: a. Machine Defaults 2 tab. b. Decurler E Table Settings button. 1-16 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 21
Black 10.8% Magenta 8.5% Cyan 8.5% Yellow 7.2% Percentage of Toner Area Coverage per Color Black 27.8% Magenta 24.7% Cyan 23.8% Yellow 28.8% DocuColor 8000/7000 System Administration Guide 1-17 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 22
if curl is apparent on your 2-Sided job. d. Select the E Table Settings button to enter Decurler E Table Settings values. 1-18 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 23
1. Decurler Adjustment 6. In the Decurler E Table Settings Type E window: a. Enter the following values in the fields by pressing the arrow buttons: - Since your job Settings values. The following screen shows how the values would be entered: DocuColor 8000/7000 System Administration Guide 1-19 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 24
button to exit the Decurler E Table Setting window and return to the Machine Defaults 2 screen. 8. To use the newly created Decurler E Table Setting, you need to activate it. From the Machine Defaults 2 screen, press the Decurler Setup button. 1-20 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 25
1. Decurler Adjustment 9. From the Decurler Setup window you need to enter job information for the Decurler E Table Setting you just programmed. Press the following buttons: Close to save the settings and return to the Machine Defaults 2 screen. DocuColor 8000/7000 System Administration Guide 1-21 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 26
you achieve acceptable output prints. c. If curl remains after trying various value entries in the Decurler E Table Setting window, call your Xerox service representative. NOTE: To review additional Decurler E Table Settings examples, See "Additional Decurler E Table Settings examples" on page 23 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 27
1 1. At the controller, logon to the Tools menu as Administrator. a. Press the Access button. b. Enter the Administrator password. c. Press Enter. DocuColor 8000/7000 System Administration Guide 1-23 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 28
1. Decurler Adjustment 2. The Pathway Option screen opens. Select the Tools Pathway button. 3. From the Tools Mode window, press: a. Machine Defaults 2 tab. b. Decurler E Table Settings button. 1-24 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 29
) downward curl. Percentage of Toner Area Coverage Alpine Nursery Percentage of Toner Area Coverage per Color Black 4.5% Magenta 5.1% Cyan 4.3% Yellow 6.0% DocuColor 8000/7000 System Administration Guide 1-25 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 30
7b of the digital press, or if curl is apparent on your 2-Sided job. d. Select the E Table Settings button. 1-26 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 31
Decurler Adjustment 6. In the Decurler E Table Settings Type E window: a. Enter the following values in the fields by pressing Setting, press Close. The Decurler E Table Setting Type E window closes and the Decurler E Table Setting window opens. DocuColor 8000/7000 System Administration Guide 1-27 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 32
1. Decurler Adjustment 7. Press the Close button to exit the Decurler E Table Setting window and return to the Machine Defaults 2 screen. 8. To use the newly created Decurler E Table Setting, you need to activate it. From the Machine Defaults 2 screen, - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 33
1. Decurler Adjustment 9. From the Decurler Setup window you need to enter job information for the Decurler E Table Setting you just programmed. Press the following buttons: Close to save the settings and return to the Machine Defaults 2 screen. DocuColor 8000/7000 System Administration Guide 1-29 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 34
coverage values entered in the Decurler E Table Setting Type E window until you achieve acceptable output prints. c. If curl remains after trying various value entries in the Decurler E Table Setting window, call your Xerox service representative. 1-30 DocuColor 8000/7000 System Administration - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 35
1. Decurler Adjustment Decurler E Table Settings example 2 1. At the controller, logon to the Tools menu as Administrator. a. Press the Access button. b. Enter the Administrator password. c. Press Enter. DocuColor 8000/7000 System Administration Guide 1-31 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 36
1. Decurler Adjustment 2. The Pathway Option screen opens. Select the Tools Pathway button. 3. From the Tools Mode window, press: a. Machine Defaults 2 tab. b. Decurler E Table Settings button. 1-32 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 37
Toner Area Coverage Upholstery by Morris Percentage Toner Area Coverage per Color Black 11.6% Magenta 11.9% Cyan 11.1% Yellow 11.4% DocuColor 8000/7000 System Administration Guide 1-33 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 38
if curl is apparent on your 2-Sided job. d. Select the E Table Settings button to enter Decurler E Table Settings values. 1-34 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 39
Decurler Adjustment 6. In the Decurler E Table Settings Type E window: a. Enter the following values in the fields by pressing Setting, press Close. The Decurler E Table Setting Type E window closes and the Decurler E Table Setting window opens. DocuColor 8000/7000 System Administration Guide 1-35 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 40
1. Decurler Adjustment 7. Press the Close button to exit the Decurler E Table Setting window and return to the Machine Defaults 2 screen. 8. To use the newly created Decurler E Table Setting, you need to activate it. From the Machine Defaults 2 screen, - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 41
1. Decurler Adjustment 9. From the Decurler Setup window you need to enter job information for the Decurler E Table Setting you just programmed. Press the following buttons: Close to save the settings and return to the Machine Defaults 2 screen. DocuColor 8000/7000 System Administration Guide 1-37 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 42
coverage values entered in the Decurler E Table Setting Type E window until you achieve acceptable output prints. c. If curl remains after trying various value entries in the Decurler E Table Setting window, call your Xerox service representative. 1-38 DocuColor 8000/7000 System Administration - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 43
1. Decurler Adjustment Decurler E Table Settings example 3 1. At the controller, logon to the Tools menu as Administrator. a. Press the Access button. b. Enter the Administrator password. c. Press Enter. DocuColor 8000/7000 System Administration Guide 1-39 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 44
1. Decurler Adjustment 2. The Pathway Option screen opens. Select the Tools Pathway button. 3. From the Tools Mode window, press: a. Machine Defaults 2 tab. a. Decurler E Table Settings button. 1-40 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 45
Color Black 30.5% Magenta 28.1% Cyan 23.8% Yellow 25.9% Percentage of Toner Area Coverage per Color Black 5.4% Magenta 4.3% Cyan 6.0% Yellow 6.7% DocuColor 8000/7000 System Administration Guide 1-41 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 46
if curl is apparent on your 2-Sided job. d. Select the E Table Settings button to enter Decurler E Table Settings values. 1-42 DocuColor 8000/7000 System Administration Guide - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 47
Decurler Adjustment 6. In the Decurler E Table Settings Type E window: a. Enter the following values in the fields by pressing Setting, press Close. The Decurler E Table Setting Type E window closes and the Decurler E Table Setting window opens. DocuColor 8000/7000 System Administration Guide 1-43 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 48
1. Decurler Adjustment 7. Press the Close button to exit the Decurler E Table Setting window and return to the Machine Defaults 2 screen. 8. To use the newly created Decurler E Table Setting, you need to activate it. From the Machine Defaults 2 screen, - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 49
1. Decurler Adjustment 9. From the Decurler Setup window you need to enter job information for the Decurler E Table Setting you just programmed. Press the following buttons: Close to save the settings and return to the Machine Defaults 2 screen. DocuColor 8000/7000 System Administration Guide 1-45 - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 50
coverage values entered in the Decurler E Table Setting Type E window until you achieve acceptable output prints. c. If curl remains after trying various value entries in the Decurler E Table Setting window, call your Xerox service representative. 1-46 DocuColor 8000/7000 System Administration - Xerox P8EX | DocuColor 8000/7000 Decurler Adjustment procedure - Page 51
DocuColor 8000/7000
Decurler
Adjustment
Version 1.0
April 2007