Yamaha 6130 Owners Manual

Yamaha 6130 - HTR AV Receiver Manual

Get Yamaha 6130 - HTR AV Receiver PDF manuals and user guides
UPC - 027108929842
View all Yamaha 6130 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha 6130 manual content summary:

  • Yamaha 6130 | Owners Manual - Page 1
    U HTR-6130 AV Receiver OWNER'S MANUAL
  • Yamaha 6130 | Owners Manual - Page 2
    label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12 Grounding or Polarization - This product may be equipped with
  • Yamaha 6130 | Owners Manual - Page 3
    SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
  • Yamaha 6130 | Owners Manual - Page 4
    manual carefully. Keep it in a safe place for future reference. 2 Install this sound system Troubleshooting" section on common operating errors before concluding that this unit is faulty. 18 Before moving this unit, press ASTANDBY/ON to set this unit in the standby mode, and disconnect the AC power
  • Yamaha 6130 | Owners Manual - Page 5
    components.... 51 Setting remote control codes 53 Advanced setup 54 ADDITIONAL INFORMATION Troubleshooting 55 Glossary 60 Specifications 62 Index 63 APPENDIX (at the end of this manual) Front panel i Remote control ii List of remote control codes iii About this manual • y indicates a tip
  • Yamaha 6130 | Owners Manual - Page 6
    input jacks for discrete multi-channel input ◆ Component video input/output capability (3 COMPONENT VIDEO INs and 1 MONITOR OUT) ◆ iPod controlling capability ◆ Sleep timer ◆ Cinema and music night listening modes ◆ Remote control with preset remote control codes Manufactured under license from
  • Yamaha 6130 | Owners Manual - Page 7
    Getting started ■ Checking the supplied accessories Check that you received all of the following parts. ❏ Remote control ❏ Batteries (2) (AAA, R03, UM-4) ❏ AM loop antenna ❏ Indoor FM antenna ■ Installing batteries in the remote control 13 ■ VOLTAGE SELECTOR (Asia and General models only) Caution
  • Yamaha 6130 | Owners Manual - Page 8
    start guide The following steps describe the easiest way to enjoy DVD movie playback in your home theater. Video monitor Front left speaker Front right speaker Subwoofer Surround right speaker Center speaker DVD player Surround left speaker Step 1: Set up your speakers ☞ P. 5 Step 2: Connect
  • Yamaha 6130 | Owners Manual - Page 9
    ) OUTPUT SUB WOOFER R FRONT A L 1 Place your speakers and subwoofer in the room. 2 Connect speaker cables to each speaker. Quick start guide Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. Front speakers Loosen Insert Tighten To the front right
  • Yamaha 6130 | Owners Manual - Page 10
    on this unit. DVD player AV receiver Video input jack Video cable VIDEO MONITOR OUT jack 4 Connect the power plug of this unit and other components into the AC wall outlet. ■ For further connections • Using the other kind of speaker combinations ☞ P. 10 • Connecting a video monitor and DVD
  • Yamaha 6130 | Owners Manual - Page 11
    combinations of input sources and sound field programs. y If you connect a Yamaha product that has capability of the SCENE control signals, this unit can automatically activate the component and start playback. Refer to the instruction manual of the DVD player for further information. ■ Using the
  • Yamaha 6130 | Owners Manual - Page 12
    . Note In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. ■ Adjusting the parameters of this unit • Optimizing the speaker parameters for your listening room (BASIC SETUP) ☞ P. 22 • Manually adjusting various parameters
  • Yamaha 6130 | Owners Manual - Page 13
    MD/ OUT (PLAY) CD-R (REC) OUTPUT SUB WOOFER R FRONT A L Connections 7 8 9 0 Name 1 DOCK terminal 2 COMPONENT VIDEO jacks 3 HDMI jacks 4 VIDEO jacks 5 ANTENNA terminals 6 SPEAKERS terminals 7 DIGITAL INPUT jacks 8 MULTI CH INPUT jacks 9 AUDIO jacks 0 SUBWOOFER OUTPUT jack See page 18 16 16
  • Yamaha 6130 | Owners Manual - Page 14
    Connections Placing speakers The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multi-channel audio sources. FL C FR 30˚ SL SR 60˚ SL 80˚ SR FR SW FL C SR SL Front left and right speakers (FL and FR) The front speakers are used for
  • Yamaha 6130 | Owners Manual - Page 15
    PREPARATION Connections Connecting speakers Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately. Caution • Use speakers with the specified impedance shown on the rear
  • Yamaha 6130 | Owners Manual - Page 16
    Insert the bare end of the speaker wire into the slit on the terminal. 3 Tighten the knob to secure the wire. Connecting the banana plug (except Europe, 2 Press and hold JTONE CONTROL and then press ASTANDBY/ON to turn on this unit. This unit turns on, an the advanced setup menu appears in the front
  • Yamaha 6130 | Owners Manual - Page 17
    jacks This unit has three types of audio jacks. Connection depends on the availability of audio jacks on your other components. AUDIO jacks For conventional analog audio signals transmitted via left and right analog audio cables. Connect red plugs to the right jacks and white plugs to the left jacks
  • Yamaha 6130 | Owners Manual - Page 18
    (DVD or DTV/CBL). Furthermore, available audio/video signals depend on the specification of the connected video monitor. Refer to the instruction manual of each connected component. ■ HDMI jack and cable plug HDMI HDMI cable plug y • We recommend using an HDMI cable shorter than 5 meters (16 feet
  • Yamaha 6130 | Owners Manual - Page 19
    ■ Connecting a cable TV/satellite tuner and a DVD recorder DOCK COMPONENT VIDEO DVD DTV/CBL DVR MONITOR OUT PR OUT DVD DTV/CBL HDMI DIGITAL INPUT PB OPTICAL Y CD 3 DTV/ CBL 2 MULTI CH INPUT FRONT SURROUND CENTER L DVD VIDEO DTV/CBL DVR IN OUT MONITOR OUT DVD DTV/CBL AUDIO DVR
  • Yamaha 6130 | Owners Manual - Page 20
    video monitor only when this unit is turned on and set to the input source (DVD or DTV/CBL). • Available audio/video signals depend on the specification of the connected video monitor. Refer to the instruction manual of each connected component. 16 En Cable TV or satellite tuner DVD recorder
  • Yamaha 6130 | Owners Manual - Page 21
    Audio out LR Audio out LR Audio out LR Audio in CD player CD recorder or MD recorder indicates recommended connections indicates alternative connections ■ Connecting jacks to accommodate for missing speakers. We recommend that you connect a 5.1-channel speaker system before using this feature.
  • Yamaha 6130 | Owners Manual - Page 22
    input at the PORTABLE mini jack take priority over the ones input at the AUDIO L/R jacks. VOLUME STANDBY /ON PHONES SILENT CINEMA SPEAKERS A/B/OFF EDIT PRESET/TUNING BAND A/B/C/D/E TONE CONTROL 1 PROGRAM PRESET/TUNING SCENE 2 3 4 MEMORY TUNING AUTO/MAN'L STRAIGHT NIGHT INPUT
  • Yamaha 6130 | Owners Manual - Page 23
    any polarity and you can connect either end of the wire to AM or GND terminal. Press ASTANDBY/ON (or E STANDBY) to set this unit to the standby mode. Note In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. English 19 En
  • Yamaha 6130 | Owners Manual - Page 24
    Lights up when this unit is reproducing PCM (Pulse Code Modulation) digital audio signals. A Headphones indicator Lights up when headphones are connected (see page 30). B SP A B indicators Light up according to the set of front speakers selected (see page 29). C NIGHT indicator Lights up when
  • Yamaha 6130 | Owners Manual - Page 25
    the remote control in the following types of conditions: - places of high humidity, such as near a bath - places of high temperature, such as near a heater or stove - places of extremely low temperatures - dusty places • To set the remote control codes for other components, see page 53. Connections
  • Yamaha 6130 | Owners Manual - Page 26
    SETUP". "ROOM" appears in the front panel display. ROOM: S >M L Choices: YES, NONE • Select "YES" if you have a subwoofer in your system. • Select "NONE" if you do not have a subwoofer in your system. 6 Press 7n to select "SPEAKERS" and then 7l / h to select the number of speakers connected to
  • Yamaha 6130 | Owners Manual - Page 27
    the balance between the surround left and surround right speakers. • Select "SWFR" to adjust the balance between the front left speaker and the subwoofer. Note The available speaker channels differ depending on the setting of the speakers. 12 Press HMENU to exit from "BASIC SETUP". English 23 En
  • Yamaha 6130 | Owners Manual - Page 28
    , and the name of currently assigned SCENE template appears in the front panel display. 3 seconds 3 seconds 1 Front panel or 1 Remote control 1 Front panel or 1 Remote control y To cancel the procedure, press 4AMP and then 8RETURN. Note Once the desired SCENE templates are assigned to the
  • Yamaha 6130 | Owners Manual - Page 29
    3 TV Sports Viewing Video games V-AUX Game Playing Note When iPod is connected to the Yamaha iPod universal dock or a Bluetooth component is connected to the Bluetooth adapter, this unit plays back the audio sources input at the DOCK terminal. y You can create your original SCENE templates
  • Yamaha 6130 | Owners Manual - Page 30
    Enh. 5ch Dock Listening Select this SCENE template when you play back music on your iPod stationed in a Yamaha iPod universal dock or Bluetooth component that is connected to the Bluetooth adapter. DOCK Music Enh. 5ch TV Viewing (SCENE 3 as the default setting) Select this SCENE template when
  • Yamaha 6130 | Owners Manual - Page 31
    or STRAIGHT mode • The night listening mode setting (see page 31) − SYSTEM: Keeps the current night listening mode. − CINEMA: Sets the night listening mode may need to set the input source of the SCENE template on the remote control. See page 28 for details. • You can create a customized SCENE
  • Yamaha 6130 | Owners Manual - Page 32
    area below to control the input source component of the selected SCENE template. Press and hold the 5SCENE button and the desired input selector button (3) for 3 seconds. y Press the 5SCENE button again to operate the input source component. * POWER POWER STANDBY POWER TV AV A B C MUTE CD
  • Yamaha 6130 | Owners Manual - Page 33
    may damage your speakers. Check whether your CD player supports CDs encoded in instructions for the source component. • See page 37 for details about FM or AM tuning instructions when the component connected to the Guide to contents When you want to... Adjust the tonal quality of the front speakers
  • Yamaha 6130 | Owners Manual - Page 34
    (see page 36). Notes • When you connect headphones, no signals are output at the speaker terminals. • All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels. ■ Muting the audio output Press FMUTE to mute the audio output. Press FMUTE again to resume the
  • Yamaha 6130 | Owners Manual - Page 35
    audio input jack select to "AUTO" in most cases. • You can adjust the default audio input jack select of this unit by using "AUDIO connected to the MULTI CH INPUT jacks is selected as the input source. - when headphones are connected and right speaker channels. Press JTONE CONTROL repeatedly to
  • Yamaha 6130 | Owners Manual - Page 36
    6LEVEL repeatedly to select the speaker you want to adjust. ■ Displaying the signal information You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal. 1 Press 4AMP and then press HMENU on the remote control. "BASIC SETUP" appears in the front
  • Yamaha 6130 | Owners Manual - Page 37
    the standby mode. Playback ■ Playing video sources in the background You can combine a video image from a video source with sound from an audio (3) on the remote control to select a video source and then an audio source. CD MD/CD-R TUNER DVD DTV/CBL DVR V-AUX/DOCK Audio sources Video sources
  • Yamaha 6130 | Owners Manual - Page 38
    cannot be selected when the component connected to the MULTI CH INPUT jacks range from minimum sound effects to powerful sounds. CINEMA DSP processing. This multi-channel sources to 2 channel or plays back 2-channel sources actual concert hall, music venue, movie theater, etc. Thus, you may notice
  • Yamaha 6130 | Owners Manual - Page 39
    value adjusts the center image towards the front left and right speakers. Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from front left and right speakers), initial setting is 3. For Music Enh. 2ch and Music Enh. 5ch
  • Yamaha 6130 | Owners Manual - Page 40
    . - when headphones are connected to the PHONES jack. ■ Enjoying multi-channel sources and sound field programs channel sources are decoded straight into the appropriate channels without any additional effect processing. 2-channel stereo sources are output from only the front left and right speakers
  • Yamaha 6130 | Owners Manual - Page 41
    Automatic tuning is effective when station signals are strong and there is no interference. If the signal received from the station you want to select is weak, tune into it manually. 1 Press NINPUT l / h repeatedly so that "TUNER" is displayed in the front panel display. 2 Press CBAND to select
  • Yamaha 6130 | Owners Manual - Page 42
    the 5 preset station groups) manually. 1 Tune into a station automatically or manually. See page 37 for tuning instructions. 2 Press FMEMORY. The the preset station group and the preset station number where the first received station will be stored by pressing DA/B/C/D/E and then EPRESET/TUNING
  • Yamaha 6130 | Owners Manual - Page 43
    station simply by selecting the preset station group and number under which it was stored. y When performing this operation with the remote control, press 3TUNER to select "TUNER" as the input source. 1 Press DA/B/C/D/E (or 7A/B/C/D/E l / h) repeatedly to select the desired preset station group
  • Yamaha 6130 | Owners Manual - Page 44
    dock Once you station your iPod to the Yamaha iPod universal dock, "iPod connected" and the DOCK indicator appears in the front panel display when "V-AUX" is selected as the input source. Controls and functions for iPod™ POWER POWER STANDBY POWER TV AV A B C MUTE CD MD/CD-R TUNER DVD DTV
  • Yamaha 6130 | Owners Manual - Page 45
    read and fully understand all the instructions before starting. Note If the Bluetooth adapter is not connected to the DOCK terminal of remote control, the connected Bluetooth adapter searches and connect to the last connected Bluetooth component. If the Bluetooth adapter cannot find the Bluetooth
  • Yamaha 6130 | Owners Manual - Page 46
    recording components. Refer to the operating instructions for those components. Notes • When this unit is set to the standby mode, you cannot record between other components connected to this unit. • The settings of TONE CONTROL (see page 31) and VOLUME settings, speaker levels (see page 32) and the
  • Yamaha 6130 | Owners Manual - Page 47
    to reflect the needs of your listening environment. ■ Basic setup BASIC SETUP Use this feature to automatically adjust speaker and system parameters (see page 22). ■ Manual setup MANUAL SETUP Use this feature to manually adjust speaker and system parameters. Sound menu 1 SOUND MENU Use this menu to
  • Yamaha 6130 | Owners Manual - Page 48
    . Pairs the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with a Bluetooth component (see page 41). Page 50 50 50 50 50 ■ Signal information SIGNAL INFO Use this feature to check audio signal information (see page 32). Using set menu Use the remote control to access and
  • Yamaha 6130 | Owners Manual - Page 49
    processing delays when using LCD monitors or projectors. ■ Speaker settings A)SPEAKER SET Use this feature to manually adjust any speaker settings. FRONT B speaker setting FRONT B Use this feature to select the location of the front speakers connected to the FRONT B terminals. Choices: FRONT, ZONE
  • Yamaha 6130 | Owners Manual - Page 50
    of each speaker. Control range: -10 to +10 dB Control step: 1 dB Initial setting: 0 dB SP LEVEL FL FR C SL SR SWFR Adjusted speaker Front left speaker Front right speaker Center speaker Surround left speaker Surround right speaker Subwoofer Note The available speaker channels differ depending
  • Yamaha 6130 | Owners Manual - Page 51
    which are only added to certain scenes. This setting is effective when the input signal contains the LFE channel. Control range: -20 to 0 dB Control step: 1 dB Speaker LFE SP LFE Adjusts the speaker LFE level. Headphone LFE HP LFE Adjusts the headphone LFE level. Note Depending on the settings of
  • Yamaha 6130 | Owners Manual - Page 52
    remote control). For DIGITAL INPUT COAXIAL jacks 1 IN (1) Choices: (1) CD, MD/CD-R, DVD, DTV/CBL, V-AUX, DVR For DIGITAL INPUT OPTICAL jacks 2 and 3 IN (2) IN (3) Choices: (2) CD, MD/CD-R, DVD, DTV/CBL, V-AUX, DVR (3) CD, MD/CD-R, DVD, DTV/CBL, V-AUX, DVR Notes • You cannot select a specific item
  • Yamaha 6130 | Owners Manual - Page 53
    remote control 7k to go in the connected input source. DTS decoder prioritize setting Choices: AUTO, DTS • Select "AUTO" if you want this unit to automatically detect input signal types and select the appropriate input mode. • Select "DTS" when you play back a DTS-CD. ■ Multi channel input setup
  • Yamaha 6130 | Owners Manual - Page 54
    . You are recommended to read and fully understand all the instructions before starting. 1 Select "START PAIRING" in "BLUETOOTH" and then press 7ENTER to start pairing. The connected Bluetooth adapter starts searching Bluetooth components. "Searching..." appears in the front panel display. 2 Check
  • Yamaha 6130 | Owners Manual - Page 55
    4 STRAIGHT NIGHT 5 6 7 8 MULTI CH IN AUDIO SEL 9 0 SLEEP 10 ENT *2 ■ Controlling a TV Press 3DTV/CBL to control your TV. To control your TV, set the appropriate remote control code for 3DTV/CBL (see page 53). DTV/CBL *2 POWER POWER STANDBY POWER TV AV A B C MUTE CD MD/CD-R TUNER
  • Yamaha 6130 | Owners Manual - Page 56
    so that the remote control can operate up to 13 different components. • When you press one of the optional component control area buttons (A to E), you can control the desired component without changing the input source of this unit. [1] POWER POWER STANDBY POWER TV AV A B C MUTE CD MD
  • Yamaha 6130 | Owners Manual - Page 57
    , repeat the setup procedure. ■ Resetting all remote control codes Use this feature to clear all the remote control codes previously set and reset all of them to the initial factory settings. 1 While pressing and holding 4AMP, press 2AV POWER for more than 3 seconds. AMP POWER AV While holding
  • Yamaha 6130 | Owners Manual - Page 58
    standby mode. 2 Press and hold JTONE CONTROL and then press ASTANDBY/ON to turn on this unit. This unit turns on, and the advanced setup speakers. Choices: 8ΩMIN, 6ΩMIN • Select "8ΩMIN" to set the speaker impedance to 8 Ω . • Select "6ΩMIN" to set the speaker impedance to 6 Ω . SP IMP. Speaker
  • Yamaha 6130 | Owners Manual - Page 59
    nearest authorized Yamaha dealer or service center. ■ General Problem Cause Remedy This unit fails to turn on or enters the standby mode soon after the power is turned on. No sound The sound suddenly goes off. Sound is heard from the speaker on one side only. The power cable is not connected or
  • Yamaha 6130 | Owners Manual - Page 60
    to "ANALOG". Make an appropriate setting following the operating instructions for your component. Set Audio input jack select to "AUTO". A humming sound is Incorrect cable connections. heard. Connect the audio cables firmly. If the problem persists, the cables may be defective. The volume level
  • Yamaha 6130 | Owners Manual - Page 61
    Troubleshooting Problem Cause Remedy There is noise interference from digital or radio may cause this problem when the transmitter is too far away or the antenna input is poor. Check the antenna connections. Try using a high-quality directional FM antenna. Use the manual tuning method. There
  • Yamaha 6130 | Owners Manual - Page 62
    error Unknown iPod iPod connected Disconnected There is a problem with the signal path from your iPod to this unit. Turn off this unit and reconnect the Yamaha iPod universal dock to the DOCK terminal of this unit. Try resetting your iPod. The iPod being used is not supported by this unit. Only
  • Yamaha 6130 | Owners Manual - Page 63
    using "List of remote control codes" at the end of this manual. See page 21 - 3 53 53 ■ Resetting the system Use this feature to reset all the parameters of this unit to the initial factory settings. 1 Press ASTANDBY/ON on the front panel to set this unit to the standby mode. 2 Press and
  • Yamaha 6130 | Owners Manual - Page 64
    DTS digital surround was developed to replace the analog soundtracks of movies with a 5.1-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial
  • Yamaha 6130 | Owners Manual - Page 65
    systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home DTS systems to provide the audiovisual experience of movie theater in the listening room of your own home. SILENT CINEMA Yamaha has
  • Yamaha 6130 | Owners Manual - Page 66
    [Other models 240 W • Standby Power Consumption [Except Asia and General models 0.8 W • Maximum Power Consumption [Asia and General models] 5ch, 10%/THD 530 W • Dimensions (W x H x D 435 x 151 x 318 mm (17-1/8" x 5-15/16" x 12-1/2") • Weight 8.0 kg (17 lbs 10 oz) * Specifications are subject to
  • Yamaha 6130 | Owners Manual - Page 67
    17 Connecting a DVD player 15 Connecting a DVD recorder 15 Connecting a video monitor 15 Connecting audio components 17 Connecting speakers 11 Connecting the AM antennas 19 Connecting the FM antennas 19 Connecting the power cable 19 Connecting the Yamaha Bluetooth adapter 18 Connecting the
  • Yamaha 6130 | Owners Manual - Page 68
    speakers 10 Playing video sources in the background 33 Pop/Rock 34 PRESET 54 Preset SCENE templates 26 ■R Radio Listening 26 Rear panel 9 Remote control codes iii Rename, SCENE template 27 Resetting the system 59 ■S SCENE 7 Searching..., Bluetooth status message 58 Selecting audio
  • Yamaha 6130 | Owners Manual - Page 69
    BC D E FG H VOLUME STANDBY /ON PHONES SILENT CINEMA SPEAKERS A/B/OFF EDIT PRESET/TUNING BAND A/B/C/D/E TONE CONTROL 1 PROGRAM PRESET/TUNING SCENE 2 3 4 MEMORY TUNING AUTO/MAN'L STRAIGHT NIGHT INPUT AUDIO SELECT EFFECT VIDEO VIDEO AUX L AUDIO R PORTABLE I J K LM N OP
  • Yamaha 6130 | Owners Manual - Page 70
    ■ Remote control 1 2 3 4 5 6 7 POWER POWER STANDBY POWER TV AV A B C MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR TV CH V-AUX/DOCK D E AMP TV INPUT TV MUTE TV VOL SCENE 1 2 3 4 BAND LEVEL TITLE MENU
  • Yamaha 6130 | Owners Manual - Page 71
    remote control codes Blu-ray player Samsung 2137 CD player Yamaha 5000, 5013 CD Recorder Yamaha 2074 HE 2078 Hitachi 2032, 2072 Home Electronics 2078 Innovation 2072 Irradio 2134 Stack 9 Systemax Tagar Systems Tivo Toshiba Touch UltimateTV Viewsonic Voodoo Yamaha ZT Group 2132 2132
  • Yamaha 6130 | Owners Manual - Page 72
    Akai 0059, 0065, 0127, 0129, 0130, 0200, 0204, 0208, 0209, 0213, 0217, 0218, 0255 Akiba 0209, 0218 Akura 0206, 0209, 0218 Alaron 0200 Alba 0200, 0207, 0208, 0209, 0217, 0218 ALBIRAL 0212 Allstar 0213 Amplivision 0207 Amstrad 0204, 0206, 0208, 0209, 0218 Amtron 0062 Anam 0208
  • Yamaha 6130 | Owners Manual - Page 73
    0061, 0104, 0112, 0113, 0125, 0205, 0213 Mivar 0200, 0201, 0202, 0203, 0204, 0207 Montgomery Ward 0058 MTC 0060, 0061, 0128, 0200 Multi System 0217 Multitech 0062, 0127, 0128, 0200, 0207, 0208, 0210, 0214, 0215, 0217 Murphy 0200, 0207 NAD 0061 Naonis 0210 NEC 0026, 0053, 0060
  • Yamaha 6130 | Owners Manual - Page 74
    Weston 0215 White Westinghouse 0200, 0207, 0217 Yamaha 0000, 0001, 0002, 0003, 0004, 0005 1042, 1045, 1046, 1050 Audio Dynamics1000 Audiovox 1003 Baird 1042, 1050 General Technic 1044, 1048 Go Video 1014 GoldHand 1050 Goldstar , 1049 Hughes Network Systems 1010 Hypson 1044,
  • Yamaha 6130 | Owners Manual - Page 75
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • Yamaha 6130 | Owners Manual - Page 76
    those in the Owner's Manual. Les nombres et lettres dans un cercle correspondent à ceux du mode d'emploi. ■ Front panel/Face avant A BC D E UC HTR-6130 FG H VOLUME STANDBY /ON PHONES SILENT CINEMA SPEAKERS A/B/OFF EDIT PRESET/TUNING BAND A/B/C/D/E TONE CONTROL 1 PROGRAM PRESET/TUNING
  • Yamaha 6130 | Owners Manual - Page 77
    ■ Remote control/Boîtier de télécommande 1 2 3 4 5 6 7 POWER POWER STANDBY POWER TV AV A B C MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR TV CH V-AUX/DOCK D E AMP TV INPUT TV MUTE TV VOL SCENE 1 2 3 4 BAND LEVEL TITLE MENU
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
HTR-6130
AV Receiver
OWNER’S MANUAL
U