Yamaha AG-Stomp Owner's Manual

Yamaha AG-Stomp Manual

Get Yamaha AG-Stomp PDF manuals and user guides View all Yamaha AG-Stomp manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha AG-Stomp manual content summary:

  • Yamaha AG-Stomp | Owner's Manual - Page 1
    Owner's Manual
  • Yamaha AG-Stomp | Owner's Manual - Page 2
    approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure
  • Yamaha AG-Stomp | Owner's Manual - Page 3
    this manual BEFORE making any connections, including connection to the main supply. 2. Do not attempt to service this product beyond that described in the user-maintenance instructions. All other servicing should be referred to qualified service personnel. 3. Main Power Supply Verification: Yamaha
  • Yamaha AG-Stomp | Owner's Manual - Page 4
    the Power 10 I Connecting a Mixer or Amplifier 10 I Connecting Headphones 11 I Digital Output 11 I Connecting an EXP Pedal 11 I Connecting MIDI Devices 11 Using the AG-Stomp 12 I Connecting the Guitar 12 I Produce Sound 13 I Editing Settings 13 I Selecting Patches 17 I Storing Patches 19
  • Yamaha AG-Stomp | Owner's Manual - Page 5
    or vibration. • Before making any connections, make sure that the power is switched OFF on the AG-Stomp and any external devices. • To protect speakers from possible damage, always set the OUTPUT knob to "0" before switching the power ON/OFF. • When connecting a speaker to this unit, make sure
  • Yamaha AG-Stomp | Owner's Manual - Page 6
    I Top Panel Display & Main Section Effect Section Pre-Amplifier Section Footswitch Section G Display & Main Section q w y e MANUAL Button Independent of the selected patch's settings, this button changes the tone to that produced by the e settings determined by the current position of each
  • Yamaha AG-Stomp | Owner's Manual - Page 7
    used to select functions you want to set such as Footswitch or MIDI Functions, etc. i BLEND Control (BLEND/STEREO) Controls the volume balance between the guitar the AG-Stomp's output jacks (OUTPUT, PHONES). * The OUTPUT knob's setting is not saved in memory. !2 SHIFT Button The button is used to
  • Yamaha AG-Stomp | Owner's Manual - Page 8
    manner: • Select a patch (1/2/3) from the currently selected Bank. • Switch the Effect Blocks ON/OFF (1: Limiter, 2: Chorus/Delay, 3: Reverb) @5 Bank Switch (AUTO F.R./BANK/TUNER) • Press the switch when feedback occurs: The AG-Stomp will automatically identify the problem frequency and apply
  • Yamaha AG-Stomp | Owner's Manual - Page 9
    these jacks to the input jacks on a power amp and speaker system, guitar amplifier, mixer, etc. A commercially available PA type TRS phone cable can be used to send a TRS balanced audio signal from the AG-Stomp. Also, the supplied TRS-XLR converter cables connected to these jacks deliver a balanced
  • Yamaha AG-Stomp | Owner's Manual - Page 10
    a Mixer or Amplifier 1. Use the supplied TRS-XLR converter cable to convert the AG-Stomp's outputs (balanced TRS) to balanced XLR outputs. 2. Use a commercially available PA type TRS phone cable, to connect the AG-Stomp's output jack to the balanced inputs of a mixer, power amplifier, etc. 3. When
  • Yamaha AG-Stomp | Owner's Manual - Page 11
    the AG-Stomp to be stored (using Bulk Dump) in a MIDI device such as the YAMAHA MIDI Data Filer MDF3, etc. also, data stored in an external MIDI device can be loaded into the AG-Stomp. Also, a MIDI foot controller, etc., can be used to select AG-Stomp patches, control individual parameters, or set
  • Yamaha AG-Stomp | Owner's Manual - Page 12
    electric/acoustic guitar's built-in pre-ampli- fier battery with the dummy battery supplied with the AG-Stomp. 2. Before making any connections, turn off the AG-Stomp's power and make sure its OUTPUT knob is set to "0", then set the +9V SUPPLY switch to "ON". 3. Use the supplied TRS phone cable to
  • Yamaha AG-Stomp | Owner's Manual - Page 13
    Using the AG-Stomp I Produce Sound 1. After confirming that the OUTPUT knob is set to "0", press the Power Switch (STAND-BY) ON ( ). Switching the Power Switch ON when the OUTPUT knob is turned up may result in damage to devices such as the amplifier, speaker, headphones, etc., or cause unexpected
  • Yamaha AG-Stomp | Owner's Manual - Page 14
    the SHIFT mode, the mode will automatically be exited. * A list of note names corresponding to each of the acoustic guitar's frets and their standard frequencies is provided in the supplemental "Patch List". Please use the list when setting the Tone Control's Variable Center Frequency. Tone Control
  • Yamaha AG-Stomp | Owner's Manual - Page 15
    Using the AG-Stomp G Setting the Mic Simulator The Mic Simulator is a specially designed circuit that adds to an electric/acoustic guitar, the special characteristics created when miking an acoustic guitar. It adds the airiness, which is found when a microphone is placed in front of the guitar's
  • Yamaha AG-Stomp | Owner's Manual - Page 16
    or frequencies of the amplified sound causes the guitar to resonate thereby being re-amplified until a steady howl or whistle is heard. The AG-Stomp prevents feedback from occurring by means of a notch filter, which is used to cut the problem frequency. The AG-Stomp provides a total of five
  • Yamaha AG-Stomp | Owner's Manual - Page 17
    (P01P93). * When the AG-Stomp is shipped, both the PRESET AREA and USER AREA contain the same patch data. (Refer to the supplemental [Patch List]). • BANK The 30 patches in each area are divided into ten banks (0-9). • PATCH Each Bank contains three patches (1-3). G Use the [UP]/[DOWN] buttons
  • Yamaha AG-Stomp | Owner's Manual - Page 18
    MIDI cable should be limited to 15 meters. The use of a longer cable may result in trouble such as inferior performance of the device, etc. MIDI IN MIDI OUT MFC10, etc 2. Match the AG-Stomp's MIDI receive channel, with the MIDI transmit channel on the external MIDI device. → page 25 [Set the MIDI
  • Yamaha AG-Stomp | Owner's Manual - Page 19
    are not stored in individual patches, they are stored in the AG-Stomp's memory as common settings for all parameters. * The OUTPUT knob's setting is not stored in memory. Use the Volume knob to set differences in volume for situations like backing, soloing, etc. * Data in the USER AREA (U01-U93) can
  • Yamaha AG-Stomp | Owner's Manual - Page 20
    the AG-Stomp's settings to their factory default condition, simultaneously hold the [UP] and [MANUAL] buttons and turn the Power ON ( ), all data in the USER AREA will be rewritten with data for the patches listed in the "Patch List" which can be found on a supplemental sheet. When the AG-Stomp is
  • Yamaha AG-Stomp | Owner's Manual - Page 21
    from exceeding a preset level (peak). • LEVEL Knob Rotate the knob to the right to increase the amount of the Limiter's effect. When set to "0.0", the Limiter will have no effect. Feedback Reduction The AG-Stomp provides a total of five Notch Filter circuits that can be used to control specified
  • Yamaha AG-Stomp | Owner's Manual - Page 22
    8 parameters. 3. Press the [FR 1] button. The controller type will appear in the display. Use the [UP]/[DOWN] buttons to set the type of controller. • EP : The foot controller connected to the AG-Stomp's EXP. PEDAL jack is the controller. • 1-31, 64-95: Control change data re- ceived from an
  • Yamaha AG-Stomp | Owner's Manual - Page 23
    the Standard Pitch Usually the tuner's standard pitch is set to A=440Hz, however there are some cases where the standard pitch of an acoustic piano, etc. is set to a pitch other than 440Hz. The AG-Stomp's standard pitch can be set to a pitch anywhere between 436Hz and 444Hz. 1. In the Tuner Mode
  • Yamaha AG-Stomp | Owner's Manual - Page 24
    Utility Mode is used for the AG-Stomp's overall system settings for things such as the footswitch, MIDI, external controllers, EXP. PEDAL jack, etc. button and use the [UP]/ [DOWN] buttons to set the function of Footswitches (1-3). • PrG : Use the Footswitches to select patches. • EFF : Use the
  • Yamaha AG-Stomp | Owner's Manual - Page 25
    's USER AREA as well as Utility Mode settings to an external device, such as the YAMAHA MDF3, etc., which can be used to store MIDI data for back up. Use a MIDI cable to connect the AG-Stomp's MIDI OUT jack to the MIDI IN jack of an external MIDI device. MIDI IN G Set the MIDI Receive Channel Sets
  • Yamaha AG-Stomp | Owner's Manual - Page 26
    to select another patch number. G About the MIDI Bulk In Operation This operation is used to return data stored in an external MIDI device, such as the YAMAHA MDF3, etc., to the AG-Stomp. Use a MIDI cable to connect the MIDI OUT jack on the external MIDI device to the AG-Stomp's MIDI IN jack. When
  • Yamaha AG-Stomp | Owner's Manual - Page 27
    Range G Transmitting Control Change Numbers from the EXP. Pedal Sets the MIDI control change number that is to be transmitted when the EXP. pedal is used. Press the [FR 2] button and use the [UP]/[DOWN] buttons to set the control change number. • oFF : MIDI is not transmitted • 1-32, 64-95 : The
  • Yamaha AG-Stomp | Owner's Manual - Page 28
    switch to return to the Play Mode. → If power is being supplied to the electricacoustic guitar from the AG-Stomp. • Is the +9V SUPPLY switch set to "ON"? (→ page 12). • Is the electric-acoustic guitar's pre-amplifier battery replaced with the dummy battery? (→ page 12). Rotating the Knobs Does Not
  • Yamaha AG-Stomp | Owner's Manual - Page 29
    Power Exclusive Power Adaptor (AC-10) AC Output: AC 12 V, 1 A Power Consumption 15 W Dimensions 280(W)x70(H)x184(D)mm (11.0"x2.8"x7.2") Weight 2.2 kg (4lbs. 4oz.) Accessories Power Adaptor (AC-10) TRS Phone Cable for Guitar Power Supply (3m) TRS-XLR Converter Cable (x2) Dummy Battery Owner's Manual
  • Yamaha AG-Stomp | Owner's Manual - Page 30
    Chart 30 YAMAHA [ Acoustic Guitar Pre Amplifier ] Date:1-May-2001 Model AG stomp MIDI Implementation Chart Version : 1.0 : : Transmitted : Recognized : Remarks : : Function ... : : : : :Basic Default : 1 - 16 : 1 - 16, off : memorized : :Channel Changed : 1 - 16
  • Yamaha AG-Stomp | Owner's Manual - Page 31
    :Real Time :Commands: x : x : : :Aux :All Sound OFF: x : x : : : :Reset All Cntrls : x : x : : : :Local ON/OFF : x : x : : MIDI Implementation Chart 31 : :All Notes OFF: x : x : : :Mes- :Active Sense : o : x : : :sages:Reset : x : x : : : : : : Mode
  • Yamaha AG-Stomp | Owner's Manual - Page 32
    V698590 Printed in Taiwan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Owner’s Manual