Yamaha AW2816 Tutorial - Page 20

• Dynamics settings for chorus 1 and 2 (Compander Hard) Threshold Ratio Out Gain Attack Release Width -26 dB 2:1 -1.0 dB 0 ms 122 ms 8 dB • Dynamics settings (Compander Soft) Threshold Ratio Out Gain Attack Release Width -23 dB 2.5:1 0 dB 26 ms 180 ms 4 dB • Dynamics settings for chorus 3: OFF s Channel 16: Lead vocal The lead vocalist on this channel has a strong and rich low-mid range, but in order to give the sound more definition, we will set L-Mid to 236 Hz and cut it by -5.0 dB. In addition, we will use a soft compander on the lead vocal to cut the noise and apply compression to emphasize the vocal strength and create a "hi-fi" feeling. EQ (ATT -14dB) LOW L-MID H-MID HIGH Q 0.11 10.0 1.2 H.SHELF F 198 Hz 236 Hz 5.04 kHz 7.55 kHz G 3.0 dB -5.0 dB 4.5 dB 4.0 dB When adjusting the EQ or dynamics, you should also adjust the fader level as appropriate. Since the level is also affected when you adjust EQ or dynamics, you will find it necessary to adjust it as well. s Saving the song To save the song, press the WORK NAVIGATE section [SONG] key to access the SONG screen. If necessary, press the [F1] key to display the Song List page. Move the cursor in the screen to "SAVE" and press the [ENTER] key. When the confirmation message appears, move the cursor to the "OK" button and press the [ENTER] key. The song has now been saved. Tutorial 19