Yamaha BD-S1067 BD-S1067 Software Update Version 1.7712 Installation Manual
Yamaha BD-S1067 Manual
View all Yamaha BD-S1067 manuals
Add to My Manuals
Save this manual to your list of manuals |
Yamaha BD-S1067 manual content summary:
- Yamaha BD-S1067 | BD-S1067 Software Update Version 1.7712 Installation Manual - Page 1
for BD-S1067 IMPORTANT NOTICE Do not attempt to update your Yamaha Blu-ray Disc Player using any other data file except those provided directly from the Yamaha website. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha - Yamaha BD-S1067 | BD-S1067 Software Update Version 1.7712 Installation Manual - Page 2
Update for BD-S1067 Network Update Method Requirement: -Internet connection This can be checked by selecting the "Connection Test" in the setup menu. See Troubleshooting select OK to upgrade to support 3D" appears on TV, follow the instructions on TV to update. While update is in progress, DO NOT - Yamaha BD-S1067 | BD-S1067 Software Update Version 1.7712 Installation Manual - Page 3
Software Update for BD-S1067 USB Thumb Drive Method Requirements: - USB thumb drive, with enough free space to store over 36MB. (File system with FAT16 or FAT32 format) - Software file provided by YAMAHA,"BDS1067_Vxxxxx.zip". STEP 1 Copy the update file to a USB thumb drive Unzip the downloaded - Yamaha BD-S1067 | BD-S1067 Software Update Version 1.7712 Installation Manual - Page 4
Update for BD-S1067 note: In case "Please select OK to upgrade to support 3D" appears on TV, follow the instructions on TV to update. While update software version has been updated to the latest. Congratulations! You have completed the software update. Your Blu-ray Disc Player is now ready for - Yamaha BD-S1067 | BD-S1067 Software Update Version 1.7712 Installation Manual - Page 5
Software Update for BD-S1067 Update Disc Method STEP 1 Preparation of update disc Unzip the downloaded file "BDS1067_Vxxx.zip". "UPG" folder will appear. Burn this "UPG" folder onto a CD-R or CD-RW as data disc with ISO9660 format. Make sure the disc is finalized. This will be your update disc. - Yamaha BD-S1067 | BD-S1067 Software Update Version 1.7712 Installation Manual - Page 6
Software Update for BD-S1067 STEP 4 Cancel the update and remove the update disc After rebooting, the system will search for additional upgrade file from the disc again. When "No valid upgrade file is found!" appears on TV, cancel the upgrade and remove the update disc. STEP 5 Confirm updated - Yamaha BD-S1067 | BD-S1067 Software Update Version 1.7712 Installation Manual - Page 7
Software Update for BD-S1067 Troubleshooting Case 1: Determine if the Blu-ray Disc Player is connected to the Internet. Solution: Perform "Connection Test". Enter Setup menu and select "Network" > "Connection Test" "OK" or "FAILED" will appear. In case of "FAILED", check your
Software Update for BD-S1067
Page.1 of 7
IMPORTANT NOTICE
Do not attempt to update your Yamaha Blu-ray Disc Player using any other data file except those
provided directly from the Yamaha website.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to
restore proper operation will not be covered under the Yamaha Limited Warranty.
Choose your update method:
There are 3 methods you can choose from.
Network Update Method……………Page 2
(Recommended method if your Blu-ray Player is connected to the Internet.)
USB Thumb Drive Method…………Page 3
(A USB thumb drive is required.)
Update Disc Method…………………Page 5
(Burning update file onto CD-R disc is required.)
If an error occurs, see
Troubleshooting
section on the last page.