Yamaha CDX-393 Owner's Manual

Yamaha CDX-393 Manual

Yamaha CDX-393 manual content summary:

  • Yamaha CDX-393 | Owner's Manual - Page 1
    Level Searching Capability • CD Synchronized Recording with a Compatible YAMAHA Tape Deck • Adjustable Display Brightness • Remote Control Capability • CDX-593 only Optical and Coaxial Digital Outputs • CDX-493 only Optical Digital Output CONTENTS Safety Instructions 2 Connections 4 Identification
  • Yamaha CDX-393 | Owner's Manual - Page 2
    Servicing - The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service until it is too late, YAMAHA and the Electronic Industries Association's Manual in a safe place for future reference.
  • Yamaha CDX-393 | Owner's Manual - Page 3
    Be sure to read the "TROUBLESHOOTING" section on common operating errors before laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing instructions found in the users manual try to eliminate the problem by using one of Yamaha
  • Yamaha CDX-393 | Owner's Manual - Page 4
    1 Connection cord (included) 2 Optical fiber cable (not included) To AC outlet 3 Connection cord (not included) CD OPTICAL COAXIAL DIGITAL IN CDX-493 LINE OUT 1 DIGITAL AUDIO OUT OPTICAL Amplifier CDX-493 1 Connection cord (included) 4 2 Optical fiber cable (not included) To AC outlet
  • Yamaha CDX-393 | Owner's Manual - Page 5
    LINE OUT 1 To AC outlet CDX-393 1 Connection cord (included) Amplifier CD To connect this unit to your amplifier, choose the operation instructions for the amplifier being used. • The LINE OUT terminals of this unit are numbered 1. When connecting this unit with a YAMAHA amplifier or receiver
  • Yamaha CDX-393 | Owner's Manual - Page 6
    panel POWER OPEN/CLOSE AUTO DISPLAY OFF SKIP/SEARCH PHONES +10 1 2 3 4 5 6 7 8 9 0 OUTPUT LEVEL Disc Tray (p. 8) Remote control sensor (p. 20) CDX-393 POWER switch (p. 8) Display panel PHONES jack (p. 11) POWER OPEN/CLOSE +10 1 2 3 4 5 6 7 8 9 0 SKIP/SEARCH Disc
  • Yamaha CDX-393 | Owner's Manual - Page 7
    . Any difference in the operation of other models is clearly indicated in this instruction (for example, "CDX-593 only"). This manual describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use the corresponding buttons on the front
  • Yamaha CDX-393 | Owner's Manual - Page 8
    593 and CDX-493 Shows the signal output level to an amplifier or the headphones, adjusted by using the OUTPUT LEVEL button. 4 Displays the CD track numbers (up to 20). After each track is played, its corresponding number disappears so that remaining track numbers can be seen at a glance. To
  • Yamaha CDX-393 | Owner's Manual - Page 9
    appears. SKIP • These operations can also be performed when the unit is in the pause or stop mode. • When using the SKIP button on the remote control transmitter: If the button is pressed and held, the track number continuously changes to higher numbers (or lower numbers). • When using the SKIP
  • Yamaha CDX-393 | Owner's Manual - Page 10
    search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. • Manual search can also be performed while disc play is paused, though no sound will be heard. • When using the SKIP/SEARCH button on the front
  • Yamaha CDX-393 | Owner's Manual - Page 11
    DISPLAY OFF Dim (The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off.) CDX-493, CDX-393 If desired, you can change the brightness of the display in three degrees by pressing the DIMMER button. When you listen with headphones
  • Yamaha CDX-393 | Owner's Manual - Page 12
    mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order. * CDX-593 and CDX-493 only If the power is switched off during FULL REPEAT play mode, pressing the POWER switch again to turn the unit on will
  • Yamaha CDX-393 | Owner's Manual - Page 13
    English PROGRAM PLAY By programming tracks, you can enjoy listening to your favorite tracks in any desired order. As many as 25 tracks can be programmed in sequence. 3 1 SYNCHRO DIMMER TIME OPEN/ CLOSE SPACE PEAK TAPE CLEAR PROG 1 2 3 INDEX 4 5 6 +I0 7 8 9 0 REPEAT RANDOM SEARCH
  • Yamaha CDX-393 | Owner's Manual - Page 14
    To stop program play Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. To check program data 1. Press the STOP button to stop the program play. 2. Press the PROG button. 3. Press
  • Yamaha CDX-393 | Owner's Manual - Page 15
    4 7 6, 7 4 Otherwise, you can enter the tape's total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 6 4 + 5 numbers for side A and side B. • You can use "CD SYNCHRONIZED RECORDING" if you have a YAMAHA tape deck with this function. In step 6 and 7, press
  • Yamaha CDX-393 | Owner's Manual - Page 16
    L Manual tape-programming For recording tracks in next program number. • You can use "CD SYNCHRONIZED RECORDING" if you have a YAMAHA tape deck with this function. In step 6 and 7, press the SYNCHRO button then press the PLAY button on this unit's remote
  • Yamaha CDX-393 | Owner's Manual - Page 17
    program data, refer to page 14. * In checking the program data, note that "Pu" appears between track numbers for side A and side B. • You can use "CD SYNCHRONIZED RECORDING" if your tape deck has this function. In step 3 and 4, press the SYNCHRO button then press the PLAY button on this unit
  • Yamaha CDX-393 | Owner's Manual - Page 18
    Automatic searching for the peak level on a disc This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for you to adjust the recording level on the tape deck, before you begin recording. 2 1 SYNCHRO DIMMER TIME OPEN/
  • Yamaha CDX-393 | Owner's Manual - Page 19
    to tape recording. With this function, you can record a CD on tape very easily and more precisely. This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck's operation manual to know whether it is compatible or not.) * This unit and the tape deck must
  • Yamaha CDX-393 | Owner's Manual - Page 20
    REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range CDX-593 2 1 Remote control sensor 3 Within approximately 6 m (19.7 feet) Battery replacement If you find that the remote This compact disc player is designed only for CD Place it in the inner recessed area of the
  • Yamaha CDX-393 | Owner's Manual - Page 21
    TROUBLESHOOTING YAMAHA dealer or service center for help. SYMPTOM The player disc tray. The remote control transmitter does not moisture on the laser pickup. The player. Clean the disc. Securely connect the audio cables. If the problem persists, the cables may be defective. Move the tuner and player
  • Yamaha CDX-393 | Owner's Manual - Page 22
    17-1/4" × 3-7/8" × 10-3/4")
  • Yamaha CDX-393 | Owner's Manual - Page 23
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

CARACTERISTIQUES
Lecture programmable à accès aléatoire
Lecture en séquence aléatoire
Lecture répétée de plage unique/disque entier
Fonction d’espacement automatique
Programmation automatique de pour
l’enregistrement sur bande
Fonction de recherche automatique du niveau
de crête
Enregistrement synchronisé de CD avec un
magnétophone à cassette compatible
YAMAHA
Fonction de modification de luminosité de
l’affichage
Fonctionnement par télécommande
CDX-593 uniquement
Sorties numérique optique et sortie
numérique coaxiale
CDX-493 uniquement
Sortie numérique optique
CDX-593/493/393
Natural Sound Compact Disc Player
Lecteur de disque audionumérique de la série “Natural Sound”
Thank you for selecting this YAMAHA Compact Disc Player.
Nous vous remercions d’avoir porté votre choix sur ce lecteur
de disque audionumérique YAMAHA.
OWNER’S MANUAL
FEATURES
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc Repeat Play
Automatic Spacing Capability
Automatic Programming for Recording to
Tape
Automatic Peak Level Searching Capability
CD Synchronized Recording with a
Compatible YAMAHA Tape Deck
Adjustable Display Brightness
Remote Control Capability
CDX-593 only
Optical and Coaxial Digital Outputs
CDX-493 only
Optical Digital Output
MODE D’EMPLOI
CONTENTS
Safety Instructions
................................................
2
Connections
.........................................................
4
Identification of Components
................................
6
Basic Operation
....................................................
8
Random-Sequence Play
....................................
12
Repeat Play
........................................................
12
Program Play
......................................................
13
Index Search
......................................................
14
Track Programming for Recording to Tape
.........
15
CD Synchronized Recording
..............................
19
Notes about the Remote Control
Transmitter
.........................................................
20
Notes about Handling Compact Discs
...............
20
Troubleshooting
..................................................
21
Specifications
.....................................................
22
TABLE DES MATIERES
Attention
...............................................................
3
Connexions
..........................................................
4
Identification des composants
..............................
6
Fonctionnement de base
......................................
8
Lecture en séquence aléatoire
...........................
12
Lecture répétée
..................................................
12
Lecture programmée
..........................................
13
Recherche d’index
.............................................
14
Programmation des plages pour
enregistrement sur bande
..................................
15
Enregistrement synchronisé d’un CD
.................
19
Remarques concernant la télécommande
.........
20
Remarques concernant la manipulation des disques
compacts
......................................................................
20
Dépistage de pannes
.........................................
21
Caractéristiques techniques
...............................
22
U C A