Yamaha CVP-207 Owner's Manual

Yamaha CVP-207 Manual

Get Yamaha CVP-207 PDF manuals and user guides View all Yamaha CVP-207 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha CVP-207 manual content summary:

  • Yamaha CVP-207 | Owner's Manual - Page 1
    CVP-209/207 OOWWNNEERR''SS MMAANNUUAALL
  • Yamaha CVP-207 | Owner's Manual - Page 2
    indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. See bottom of Keyboard enclosure for graphic symbol
  • Yamaha CVP-207 | Owner's Manual - Page 3
    instrument inspected by qualified Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility Do not connect the instrument to an electrical outlet using a mul- tiple-connector. Doing so can result in lower sound quality, . (1)B-7 1/2 CVP-209/207 3
  • Yamaha CVP-207 | Owner's Manual - Page 4
    from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • On the CVP-209, bumping the surface of the instrument with metal, porcelain, or other
  • Yamaha CVP-207 | Owner's Manual - Page 5
    settings for the Clavinova's various functions. Data List : Voice List, MIDI Data Format, etc. * The models CVP-209/207 will be referred to as the CVP/Clavinova in this Owner's Manual. * The illustrations and LCD screens as shown in this owner's manual are for instructional purposes only, and
  • Yamaha CVP-207 | Owner's Manual - Page 6
    your performance. I Owner's Manual This manual contains complete instructions for operating your Clavinova. I Data List This manual contains lists of voices, styles and parameters, etc. I Bench A bench may be included or optional, depending on your locale. Handling the Floppy Disk Drive (FDD) and
  • Yamaha CVP-207 | Owner's Manual - Page 7
    disk drive or floppy disks. Data backup • For maximum data security Yamaha recommends that you keep two copies of important data on separate floppy disks. This gives you a backup if one disk is lost or damaged. To make a backup disk use the Disk to Disk function on page 150. About the Floppy Disks
  • Yamaha CVP-207 | Owner's Manual - Page 8
    keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock. When transporting the assembled Clavinova, make sure all screws are properly tightened and have not been loosened by moving the instrument. 8 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 9
    Manual and Data List 5 Accessories 6 Handling the Floppy Disk Drive (FDD) and Floppy Disk 6 About the Display Messages 8 Maintenance 8 Application Index 12 What can you do with the Clavinova 14 Setting Up the Clavinova 16 Panel Controls and Terminals 18 Quick Guide 20 Playing the Demos 20
  • Yamaha CVP-207 | Owner's Manual - Page 10
    109 Customizing the Event List - Filter 109 Editing the Channel Data 117 Making Style the Effects 123 Adjusting the Sound to Match the Performance Environment Keyboard - Controller 139 Making Settings for the Pedals 139 Changing the Touch Sensitivity and Transpose - Keyboard CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 11
    Do With MIDI 158 Data Compatibility 159 Disk format 159 Sequence Format 159 Voice Allocation Format 160 CVP-209/207: Keyboard Stand Assembly 161 Troubleshooting 163 Specifications 165 Index 167 Introduction Quick Guide Basic Operations - Organizing Your Data Playing the Demos Voices Styles
  • Yamaha CVP-207 | Owner's Manual - Page 12
    demo songs...page 53 Listening to the demo of the selected voices page 55 Listening to songs with the special voices of the Clavinova page 121 Playing Calling up the piano and Right Sections of the Keyboard" on page 58 Changing the sound Enhancing the sound with reverb and other effects CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 13
    Outputting the sound of an external device through the built in speakers of the Clavinova (AUX IN jacks)" on page 153 Connecting a computer Connecting to a Computer (MIDI terminals/TO HOST terminals)" on page 154 Assembling Assembling and disassembling the Clavinova CVP-209/207: Keyboard
  • Yamaha CVP-207 | Owner's Manual - Page 14
    MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON OFF PART DIRECT software, and let the display and guide lamps show you when and where to play the proper notes. It's never been easier or more fun to learn new music! DIGITAL
  • Yamaha CVP-207 | Owner's Manual - Page 15
    grand piano voice. TO HOST terminal Make music with a computer - quickly and easily (page 154) Dive in and take advantage of the wide world of computer music software. Connections and setup are exceptionally easy, and you can play back your computer recorded parts with different instrument sounds
  • Yamaha CVP-207 | Owner's Manual - Page 16
    down before releasing it. Sheet Music Braces These braces are for holding the pages of music books in place. I To open Music Stand I To raise the music stand: 1 Pull the music stand toward yourself as far as it will go. 2 Lower the music stand until it locks in place. I To close 16 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 17
    MIC. LINE IN MIC. LINE PHONES MIN MAX POWER ON OFF A B C D E BALANCE CHANNEL ON OFF PART The drive lamp lights. BACK When you're ready to turn off the power, press the [POWER] switch again. ¡ Both the display and the drive lamp below the right end of the keyboard will turn off. CVP-209/207 17
  • Yamaha CVP-207 | Owner's Manual - Page 18
    TEMPO TAP TEMPO 20 RESET 21 18 19 TRANSPOSE RESET 22 INTRO MAIN ENDING rit. SYNC.STOP SYNC.START START STOP 27 28 29 30 31 32 33 34 35 MENU 36 DEMO 37 HELP 38 FUNCTION 42 A B C DIGITAL STUDIO 39 SOUND CREATOR 40 DIGITAL RECORDING 41 MIXING CONSOLE D E BALANCE 43 PART CHANNEL ON OFF
  • Yamaha CVP-207 | Owner's Manual - Page 19
    record XG-compatible song files. XF Format The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality and open-ended expandability for the future. The Clavinova is capable of displaying lyrics when an XF file containing lyric data is played. (SMF is the most common
  • Yamaha CVP-207 | Owner's Manual - Page 20
    NEXT For this example, FUNCTION is selected. Function Demos demonstrate many of the different functions on the CVP-209/207. Voice Demos showcase the voices of the CVP-209/207. Style Demos introduce you to the rhythms and accompaniment styles of the CVP209/207 (page 53). 3 Press any of the [A] to
  • Yamaha CVP-207 | Owner's Manual - Page 21
    song that you are playing back. BALANCE and CHANNEL buttons Floppy disk drive The following songs are compatible for playback on the CVP-209/207. Refer to pages 74, 159 for more details on the logos. Disks bearing this logo contain song data for voices defined in the GM standard. Disks bearing
  • Yamaha CVP-207 | Owner's Manual - Page 22
    followed by the [EXIT] button. A From the MAIN display (the B display shown when the C power is turned on), you can select songs, voices, accom- D paniment styles, etc. E PRESET FLOPPY DISK Press the [BACK]/[NEXT] button to select the drive. 3 Press the [A] button to select the preset songs
  • Yamaha CVP-207 | Owner's Manual - Page 23
    or [FF] button. • With song data software (Standard MIDI format 0) that includes lyrics, you can view the lyr- ics on the display during playback. You can also view the off. 1 2 3 4 5 6 7 8 CHANNEL ON / OFF PART 1 2 3 4 5 6 7 8 If the STYLE tab is selected, press this button again
  • Yamaha CVP-207 | Owner's Manual - Page 24
    , your singing, and your playing. 1) Press the [BALANCE] button. 2) Press the [1 - 8LM] button corresponding to the part of which the volume you wish to adjust. BALANCE 1 2 3 4 5 6 7 8 You can call up a full set starting and stopping the song, as well as the accompaniment. 24 Quick Guide
  • Yamaha CVP-207 | Owner's Manual - Page 25
    and hear what they can do for your music. Here, you'll learn how to select individual screen is not displayed, press the [DIRECT ACCESS] button followed by the [EXIT] button. F VOICE PART ON OFF G and LEFT parts are turned off. 2 Select a voice group. VOICE PIANO & HARPSI. E. PIANO ORGAN &
  • Yamaha CVP-207 | Owner's Manual - Page 26
    can play the voice yourself from the keyboard, but you can also have the Clavinova demonstrate the voice for you. Simply press the [8L] button from the display above, and a Demo of the voice plays automatically. Playing Two Voices Simultaneously 1 Press the VOICE PART ON/OFF [LAYER] button to turn
  • Yamaha CVP-207 | Owner's Manual - Page 27
    the notes you play with your right sound a different voice (or voices). Split Point LEFT MAIN/LAYER MAIN and LAYER voices are meant to be played with the right hand. The LEFT voice is played with the left hand. 7 Press the [EXIT] button to return to the MAIN display. EXIT Quick Guide 27
  • Yamaha CVP-207 | Owner's Manual - Page 28
    Playing Styles Playing Styles The Clavinova has a huge variety of musical "styles" that you can call upon to back up your own performance. They give you anything from a simple, yet effective piano backing or percussion accompaniment to a full band or orchestra. Style related buttons Reference on
  • Yamaha CVP-207 | Owner's Manual - Page 29
    keyboard that separates the auto accompaniment section and the right-hand section of the keyboard is called the "split point." Refer to page 138 for instructions original setting. Press the [EXIT] button to leave the TEMPO display. 7 Try playing other chords with your left hand. For Guide 29
  • Yamaha CVP-207 | Owner's Manual - Page 30
    in the right-hand range of the keyboard. The CVP-209/207 has various Harmony/Echo types (page types, refer to the separate Data List. Style Sections Each style in used for playing the main part of the song. It plays accompaniment, to make your performance sound even more professional. This is Guide
  • Yamaha CVP-207 | Owner's Manual - Page 31
    is playing. • If you press the [BREAK] button while the ending is playing, the break will immediately start playing, continuing with the main section. Quick Guide 31
  • Yamaha CVP-207 | Owner's Manual - Page 32
    by simply releasing or playing the keys (in the Auto Accompaniment section of the keyboard). This is wonderful way to instantly reconfigure all the settings on the Clavinova to match the style you want to play. 1 Select 's another way to further automate musical changes and spice up your performance
  • Yamaha CVP-207 | Owner's Manual - Page 33
    name from the Music Finder and the CVP-209/207 automatically makes all appropriate panel settings to let you play in that music style! Using the Music Finder 1 Press the [MUSIC FINDER] button. MUSIC FINDER 2 Select section Press the [EXIT] button to return to the MAIN display. Quick Guide 33
  • Yamaha CVP-207 | Owner's Manual - Page 34
    enter a song title or keyword - and instantly call up all the records that match your search criteria. 1 Press the [MUSIC FINDER] button. MUSIC FINDER 2 Press the [I] button to call up the MUSIC FINDER SEARCH 1 display. The results of Search 1 and 2 appear in the correspondingly numbered SEARCH
  • Yamaha CVP-207 | Owner's Manual - Page 35
    -209 and the CVP-207. In the instructions above, all Music Finder data is handled together. Besides this, when you save or load style files, the Music Finder data that uses the relevant style file(s) is stored or added automatically. When you copy or move a style file on a floppy disk to the USER drive
  • Yamaha CVP-207 | Owner's Manual - Page 36
    . Song playback starts automatically the moment you start playing the melody. • If you can hear the Clavinova playing the melody part as well, check the channel setting for the melody part in the song data, and change the channel assigned to Track 1 (page 137). You can also change the song channel
  • Yamaha CVP-207 | Owner's Manual - Page 37
    Clavinova lets you record, too - quickly and easily. Try out the Quick Recording feature now and capture your keyboard starts as soon as you start playing the keyboard. 7 When you've finished recording, press Save the recorded data as required (pages 39, 45). CAUTION The recorded data will be lost
  • Yamaha CVP-207 | Owner's Manual - Page 38
    notes. 1 - 6 Use the same operations as in "Playing Along with the Clavinova" on page 36. For this example, you practice the right hand part of "Playing Along with the Clavinova." 7 Press the [GUIDE] button. GUIDE Before Practicing Before starting a practice session, play back the entire song
  • Yamaha CVP-207 | Owner's Manual - Page 39
    how to use the basic operations of the display controls in handling and organizing the data of the CVP-209/207 in files and folders. Files can be opened, saved, named, moved, or deleted in their respective Open/Save displays. You can select these displays according to their respective file types, as
  • Yamaha CVP-207 | Owner's Manual - Page 40
    file (which can be saved in the USER or FLOPPY DISK drive). USER drive Files kept here are those containing your own original data, created or edited using the various functions of the CVP209/207. They are stored internally to the CVP-209/207. FLOPPY DISK drive You can also store your original
  • Yamaha CVP-207 | Owner's Manual - Page 41
    the files. This display ("Open/Save" display) is typical of those used to call up and store files (voice files). The CVP-209/207 already contains a variety of voices in the PRESET section. You can store your own original voices created with the Sound Creator function to the USER or FLOPPY DISK section
  • Yamaha CVP-207 | Owner's Manual - Page 42
    and folders. Any file/folder in the USER and FLOPPY DISK sections can be named or renamed. Execute the following steps when there is data in the User drive. If there are Preset files/folders you wish to (page 46). Press the [8L] (OK) button. To cancel, press the [8M] (CANCEL) button. 42 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 43
    organizing your data. Any file/folder in the USER and FLOPPY DISK sections can be moved, using the cut-and-paste operation described below. 1 Press the [2M] (CUT) button (page 39). The CUT display appears. 2 files which can be handled in the current Open/ Save display will be pasted. CVP-209/207 43
  • Yamaha CVP-207 | Owner's Manual - Page 44
    copy files and folders as desired, for organizing your data. Any file/folder in the PRESET, USER and FLOPPY DISK sections can be copied, using the copy-and-paste operation described below. 1 Press the [3M] (COPY) button (page 39). The COPY display appears. 3 Press the [7M] (OK) button. To stop the
  • Yamaha CVP-207 | Owner's Manual - Page 45
    FLOPPY DISK drives. If the Open/Save display for the type of data you wish to save is not shown, first return to the MAIN display When you store data to these locations, all file types of the Clavinova (Voice, Style, DOC software and Yamaha Disklavier software, and their edited files on the CVP-209/207,
  • Yamaha CVP-207 | Owner's Manual - Page 46
    display (highlighted), press the [ENTER] button one or several times to convert the characters into the appropriate kanji. The reversed area can be changed by the [DATA up the mark list by pressing the [6M] button after selecting a character (before actual entry of a character). 46 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 47
    dial. The selected item can then be called up or executed by using the [ENTER] button. ENTER In the example VOICE display, you can select the desired voice file with the [DATA ENTRY] dial, and call up DATA ENTRY the selected item by pressing the [ENTER] button on the panel. CVP-209/207 47
  • Yamaha CVP-207 | Owner's Manual - Page 48
    REPEAT TAP TEMPO GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON
  • Yamaha CVP-207 | Owner's Manual - Page 49
    OUT] TEMPO [TAP TEMPO] E E [E] [] TRANSPOSE [E] [] MENU [DEMO] [HELP] [FUNCTION] DIGITAL STUDIO [SOUND CREATOR] [DIGITAL RECORDING] [MIXING CONSOLE] [BALANCE] [CHANNEL ON/OFF] [DIRECT ACCESS] [NEXT] [BACK] [ENTER] [EXIT] VOICE PART [LAYER] [LEFT] VOICE EFFECT [REVERB] [DSP
  • Yamaha CVP-207 | Owner's Manual - Page 50
    GUITAR SYNTH. LEFT HOLD BASS XG ORGAN FLUTES USER ENTER MUSIC FINDER ONE TOCTH SETTING 1 2 3 4 DATA ENTRY PIANO FREEZE 1 2 3 4 5 6 7 8 MEMORY 1 MENU 2 DEMO HELP FUNCTION Help messages can be displayed in any one of the following languages: ENGLISH JAPANESE GERMAN FRENCH
  • Yamaha CVP-207 | Owner's Manual - Page 51
    REPEAT TAP TEMPO GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON
  • Yamaha CVP-207 | Owner's Manual - Page 52
    Basic Operations - Organizing Your Data Tap Tempo This useful feature lets style (unless the tempo has been changed manually). Hitting the [TAP TEMPO] button produces a tapping sound. You can change this sound, if desired (page 149). n You tap three times; for 5/4 time, tap five times. 52 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 53
    TAP TEMPO GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING ⁄ rit. SYNC.STOP SYNC.START START⁄ STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON
  • Yamaha CVP-207 | Owner's Manual - Page 54
    the desired word or item by using the [DATA ENTRY] dial, then press the [ENTER] button or number buttons ([1M],[2M],etc.) to call it up. 4 Relevant explanations are shown in the display. A F B G C H D I E J 1 2 3 4 5 6 7 8 END EXIT Return to the MAIN screen. 54 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 55
    displayed or not (page 149). n XG is a major enhancement of the GM System level 1 format, and was developed by Yamaha specially to provide more voices and variations, as well as greater expressive control over voices and effects, and to ensure compatibility of data well into the future. CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 56
    identical. Refer to the separate Data List (Drum/key Assignment List) for a listing of the sounds in each drum/SFX kit. One-touch Piano Play This convenient, easy-to-use feature completely and automatically reconfigures the entire CVP-209/207 for optimum piano performance. No matter what settings
  • Yamaha CVP-207 | Owner's Manual - Page 57
    ENTER MUSIC FINDER ONE TOCTH SETTING 1 2 3 4 DATA ENTRY PIANO FREEZE 1 2 3 4 5 6 7 8 MEMORY DIRECT ACCESS 1 2 3 4 5 6 7 8 EXIT Playing a layer of two voices LAYER part Playing two voices separately - on the left and right sections of the keyboard LEFT part Playing
  • Yamaha CVP-207 | Owner's Manual - Page 58
    . LEFT HOLD BASS XG ORGAN FLUTES USER ENTER MUSIC FINDER ONE TOCTH SETTING 1 2 3 4 DATA ENTRY PIANO FREEZE 1 2 3 4 5 6 7 8 a concert hall. I DSP The CVP-209/207 features a variety of dynamic built-in digital effects, letting you process the sound in various ways. You can use
  • Yamaha CVP-207 | Owner's Manual - Page 59
    . For example, if you play and release a chord in the auto accompaniment section of the keyboard (with the left part on and the Left voice set to Strings), the strings part sustains, adding a natural richness to the overall accompaniment sound. Voices The Portamento effect creates a smooth
  • Yamaha CVP-207 | Owner's Manual - Page 60
    (Preset, User, (Style List). B G Floppy Disk) for saving the style. C H D I E J 1 2 3 4 5 6 7 8 2-2 Select a Style. When you've opened a lower directory's display, this button (UP) lets you call up the next higher directory, from which you can select Style groups. 60 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 61
    keyboard. piano-only accompaniment - effectively recreating the left-hand performance of an accomplished pianist. Just by playing the proper chords with your left hand, you can automatically add complicated arpeggios and bass/chord patterns - such as difficult-to-play stride piano parts. CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 62
    the rhythm doesn't sound. When you want display. BALANCE CHANNEL ON / OFF PART Call up the Channel ON/ OFF display. BALANCE display STYLE part (Auto Accompaniment section) SONG part Adjust the output level of the Part. MIC part Parts played from the keyboard MIDI channel in the song data (page 158).
  • Yamaha CVP-207 | Owner's Manual - Page 63
    chords on the auto accompaniment section of the keyboard. The Fingered mode recognizes the various chord types listed on the next page. FINGERED ON BASS This AI AI FULL KEYBOARD Artificial Intelligence When this advanced auto accompaniment mode is engaged, the CVP-209/207 will automatically create
  • Yamaha CVP-207 | Owner's Manual - Page 64
    if you play any three adjacent keys (including black keys), the chord sound will be canceled and only the rhythm instruments will continue playing (Chord • You can also have the CVP-209/207 "teach" you how to play Fingered chords. From the CHORD FINGERING display (page 139), specify the chord
  • Yamaha CVP-207 | Owner's Manual - Page 65
    ) The CVP-209/207 features various section is currently selected. LED is off - No section data; the section cannot be played. • You can dynamically control keyboard (page 138). • If you press the [SYNC. START] button while an accompaniment is playing, the accompaniment will stop and the CVP209/207
  • Yamaha CVP-207 | Owner's Manual - Page 66
    -in/fade-out can also be set (page 148). Stopping the Style Playback While Releasing Keys (SYNC. STOP) When the Synchro Stop function is engaged, accompaniment playback will stop fingering mode is set to Full Keyboard/AI Keyboard or the auto accompaniment on the panel is set to off. 66 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 67
    Styles Selecting Intro and Ending Types (INTRO/ENDING) 1 A B C D E To call up the [MAIN] display, first press the [DIRECT ACCESS] button, then press the [EXIT] button. 2 Select a Intro D E Select In during a performance by pressing the next Main section's button twice quickly. CVP-209/207 67
  • Yamaha CVP-207 | Owner's Manual - Page 68
    REPEAT TAP TEMPO GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON
  • Yamaha CVP-207 | Owner's Manual - Page 69
    setups (four setups per style). For a list of One Touch Setting setup parameters, refer to the separate Data List (Parameter Chart). 1 Select a style. 2 the current style will appear. Select "YES" ND to call up the STYLE display, then save the panel settings (page 39, 45). Unless you store the
  • Yamaha CVP-207 | Owner's Manual - Page 70
    REPEAT TAP TEMPO GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON
  • Yamaha CVP-207 | Owner's Manual - Page 71
    the maximum. I [3LM]~[5LM] GENRE Selects the specific music genre for searching. The available range includes all genres (ANY), the preset genres, and any genres you've entered yourself (page 70). I [8M] CANCEL Press this to cancel the operation and return to the previous display. CVP-209/207 71
  • Yamaha CVP-207 | Owner's Manual - Page 72
    to call up the actual accompaniment style. Keep in mind that the Beat setting made here is only for the Music Finder search function; this does not affect the actual Beat setting of the accompaniment style itself. The maximum number of records is 2500, including internal records. 72 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 73
    and return to the MUSIC FINDER display. To maintain the edited and registered data, make sure to save all Music Finder records as a file (page 151). If no saved, the data will be lost when another Music Finder file is called up or the factory-programmed settings are restored (page 151). CVP-209/207 73
  • Yamaha CVP-207 | Owner's Manual - Page 74
    of ways - playing along on the keyboard with the recorded song, as well as practicing and learning new music with the Guide (page 79) and Repeat (page 78) functions. You can also display the music notation and lyrics in the LCD. If you connect a microphone to the CVP-209/207, you can sing along with
  • Yamaha CVP-207 | Owner's Manual - Page 75
    If the MAIN screen (at left) is not displayed, press the [DIRECT ACCESS] button followed by as soon as you play the keyboard. You can also use this function REC TOP START / STOP REW FF REPEAT GUIDE NEW SONG SYNC.START Adjust the tempo by ON from the SONG SETTING display (page 137). Make sure
  • Yamaha CVP-207 | Owner's Manual - Page 76
    accompaniment styles and features in place of the accompaniment parts of the song. Make the settings below and play your own chord substitutions in place of the song's chord data. • [ACMP] button ON • [AUTO FILL styles are automatically started when starting song playback. 76 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 77
    (only that channel will sound), hold down the appropriate button corresponding to the channel. To release the solo for the channel, press that channel's button again. Channel Refers to the MIDI channel in the song data. The channels are assigned as shown below for the CVP-209/207. Song 1 - 16
  • Yamaha CVP-207 | Owner's Manual - Page 78
    this button to turn on/off the right-hand part. Use this button to turn on/off the left-hand part. You can change the channel assignments for Track 1 the [REPEAT] button again. 3 After an automatic lead-in (to help guide you into the phrase), the range from point A to point B is played CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 79
    along. Simply play a key on the keyboard in time with the music - any key is fine - and the accompaniment parts of the song follow your playing. This guide lamps. The Clavinova follows your singing and automatically adjusts the timing and tempo of the song to match your vocal performance. CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 80
    - and left-hand parts recorded to the song data have not been properly separated, the practice functions may not work as expected. 5 REC TOP START / STOP REW FF REPEAT NEW SONG SYNC.START Stop the song. GUIDE END GUIDE To turn the practice function, press the button again. 80 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 81
    .). n When accidentals (sharp and flats) and notes cannot be displayed on one line, they are displayed in the next line from the middle of the measure. n The notation functions cannot be used to create song data by inputting notes. For information on creating song data, see page 98. CVP-209/207 81
  • Yamaha CVP-207 | Owner's Manual - Page 82
    piano format (two connected staves). 1 2 3 4 5 6 7 8 I [1LM] LEFT CH/[2LM] RIGHT CH This determines the Left channel (channel for the left-hand part) and Right channel (channel for the right-hand part are shorter than the Note resolution will not be displayed in the notation. 82 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 83
    is set to ON, the notes in the display appear in color (C: red, D: yellow, E: green, I [8L] OK This closes the detailed setting display and starts generating the notation. You can also execute 8M] CANCEL This closes the detailed setting display without changing the settings. You can also
  • Yamaha CVP-207 | Owner's Manual - Page 84
    be shown on a connected TV (page 144, 153). 5 The color of the lyrics changes as the song plays. END REC TOP START / STOP REW FF REPEAT GUIDE NEW SONG SYNC.START Stop the song. To return to the previous page, press the EXIT button. The lyrics can be changed (page 109). 84 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 85
    FF REPEAT TAP TEMPO GUIDE 3 BREAK INTRO TEMPO 4 RESET MAIN TAP TEMPO TRANSPOSE 5 RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D 6 SOUND CREATOR E DIGITAL RECORDING 7 MIXING CONSOLE BALANCE PART CHANNEL ON OFF PART 8 BACK NEXT MEMORY
  • Yamaha CVP-207 | Owner's Manual - Page 86
    banks can be saved to "USER" or "FLOPPY DISK" as Registration bank files. Keep in Data." The result of the Name/Delete operation will be lost when the power is turned off unless you return to the REGISTRATION BANK display by pressing the [8M] (UP) button and save the data (page 45). 86 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 87
    you de-select "STYLE" in the REGISTRATION MEMORY display, you can keep the currently selected style even when pedal (page 142). Selecting the Freeze Settings 1 MENU 2 DEMO HELP FUNCTION Call up the "FREEZE" page from the REGIST. MEMORY FREEZE 1 2 3 4 5 6 7 8 MEMORY CVP-209/207 87
  • Yamaha CVP-207 | Owner's Manual - Page 88
    the [SOUND CREATOR] button. DIGITAL STUDIO SOUND CREATOR DIGITAL RECORDING MIXING CONSOLE PART The voice can also be selected in the SOUND CREATOR display. CAUTION The settings are lost if the edited part's voice is switched to another voice. Important data should be saved to User Drive or floppy
  • Yamaha CVP-207 | Owner's Manual - Page 89
    in each display. The Sound Creator settings affect only the Main part Built into the CVP-209/207 are two different tone data exceeds the polyphonic limit. Natural! Natural voices (sounded by Natural tone generation source) Used mainly for keyboard-played voices Cool! Sweet! Live! Clavinova
  • Yamaha CVP-207 | Owner's Manual - Page 90
    pianos FLAT .......... Tuning curve in which the frequency is octave doubled over the entire keyboard the same as for CONTROLLER display. For details, see page part's voice is used, the M/LYR parameter is available; when the Left part's voice is used, the LEFT parameter is available. 90 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 91
    Higher values result in a brighter sound. Volume Cutoff frequency These frequencies sounds, or the long release of a sustained piano tone. • ATTACK ...... Determines how quickly the sound see diagram). VIBRATO Creates a wavering in the sound by periodically changing the pitch. • DELAY ........
  • Yamaha CVP-207 | Owner's Manual - Page 92
    separate Data List. NATURAL VOICE Determines the brilliance of the tone, when a Natural voice is selected. This can also be set from the PIANO page (page 90), when a piano voice is 88. The parameters are the same as for HARMONY/ECHO display of FUNCTION. For details, see page 144. 92 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 93
    sustain portion of the sound, increasing or decreasing the response time of the initial swell and release, based on the digital effects, see pages 58, 123. Determines the DSP effect type to be applied to the Organ Flutes voice. Normally this will be one of the fifteen (CVP-209), or seven (CVP-207
  • Yamaha CVP-207 | Owner's Manual - Page 94
    be recorded. • Songs recorded on the CVP-209/ 207 are automatically recorded as SMF (Standard MIDI File format 0) data. For details on SMF see page 159. • Playback of the recorded song data can be transmitted from MIDI OUT, letting you play the sounds of a connected external tone generator (page 146
  • Yamaha CVP-207 | Owner's Manual - Page 95
    you play the keyboard. You can display for Song to store the recorded data (page 39, 45). CAUTION Turning off the power automatically deletes your recorded performance. If you wish to save the recording, make sure to store it to internal memory (USER drive) or floppy disk (page 39, 45). CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 96
    parts MIDI About the accompaniment style parts part uses various appropriate instrument sounds piano or guitar voices. Pad This part features sustained chords and commonly uses lush sounds such as strings, organ, and choir. Phrase ......This part recording over the part of an part is automatically selected when setting
  • Yamaha CVP-207 | Owner's Manual - Page 97
    ] button from the Open/Save display for Song to store the recorded data (page 39, 45). When selecting the MIDI part • Setting a single channel to MIDI All incoming data received via any of the MIDI channels 1 - 16 is recorded. When using an external MIDI keyboard or controller to record, this lets
  • Yamaha CVP-207 | Owner's Manual - Page 98
    I J 5 Call up the Step Record display by pressing the [G] button. 98 CVP-209/207 Any voice, effect and other settings you make in the Mixing Console are automat- F ically cancelled when you G call up the CHD (Chord) page. H I J The voices in the USER and FLOPPY DISK pages can- not be
  • Yamaha CVP-207 | Owner's Manual - Page 99
    first specify the length and loudness in this display, then enter the pitch by actually playing the note on the keyboard. Moves the cursor position A up and down. 20% Manual The gate time (note length) can be specified as a percentage by using the [DATA ENTRY] dial. CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 100
    this section, we'll show you how to use Step Recording by guiding you through this actual music example, shown at right. The operations here apply to step 6 on the recorded data, press the [EXIT] button. The entered data can be edited from the SONG CREATOR (1 - 16) display (page 107). 100 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 101
    C Enter the chords by using the currently selected chord fingering method in the Auto Accompaniment section of the keyboard. 1 Press the MAIN [A] button to specify the section, and enter the chords as shown at right. Select this note value and play the chords indicated at right. CVP-209/207 101
  • Yamaha CVP-207 | Owner's Manual - Page 102
    data, press the [EXIT] button. The entered data can be edited from the SONG CREATOR (CHD) display "END" mark is shown in the display, indicating the end of the song data. The actual position of the End input, the End mark automatically follows the Ending data. When a section other than Ending is
  • Yamaha CVP-207 | Owner's Manual - Page 103
    Recording. To call up these settings, select the REC MODE display by using the [BACK][NEXT] button, after performing operation steps data Start overwrite recording Stop overwrite recording/ play original data 1 2 3 4 5 7 Previously recorded data Newly recorded data Deleted data CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 104
    display shown below, use the [BACK]/[NEXT] buttons. Quantize Quantize lets you "clean up" or tighten the timing of a previously recorded channel. For example, the following musical details. Calls up the SONG display, from which you can save the edited data. Determines how strongly the CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 105
    SONG display, from which you can save J the edited data. These let you specify the two source channels to be mixed. Determines the channel into which the mix or copy results will be placed. If "COPY" is selected here, the data from Source 1 is copied to the Destination channel. CVP-209/207 105
  • Yamaha CVP-207 | Owner's Manual - Page 106
    . Score Setting Stores the settings of the Score display. Mic. Setting Stores the microphone settings in the mixing console. Guide Setting Stores the settings of the practice functions. When the settings are stored, selecting a song automatically turns on the Guide functions. 106 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 107
    For details on program change messages and how to set them, refer to the separate Data List booklet (Voice List). Determines the pitch bend value. Determines the after touch value. The sound of the voices recorded with Step recording may sound slightly different from the original. CVP-209/207 107
  • Yamaha CVP-207 | Owner's Manual - Page 108
    change the actual contents of the data; however, it lets you delete, cut, copy, and paste the data. Meta (Meta event) Displays the SMF meta events in the song. This does not let you change the actual contents of the data; however, it lets you delete, cut, copy, and paste the data. 108 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 109
    107 - page 109). Calls up the Main Filter display. For more information on each event type, refer to the separate A Data List booklet (MIDI Data Format). B C Calls up the Control Change D Filter display. For more select the item, scrolling up/down eight items at a time. CVP-209/207 109
  • Yamaha CVP-207 | Owner's Manual - Page 110
    REPEAT TAP TEMPO GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON
  • Yamaha CVP-207 | Owner's Manual - Page 111
    F buttons to select the various pages. G H I J 5 Call up the Style display by pressing the [I] (SAVE) button (in Assembly page: [J] button), then save the recorded / edited data to the USER or FLOPPY DISK page. END Press the [EXIT] button to close the STYLE CREATOR display. CVP-209/207 111
  • Yamaha CVP-207 | Owner's Manual - Page 112
    restoring the selected data. I Releasing the [J] button J permanently deletes the data. Before recording to you can record new sounds and notes on each pass keyboard. 3 Stop recording by pressing the STYLE [START/STOP] button again. 4 With the REC CHANNEL display shown, close the display CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 113
    that sound are data or control data). Press the [F] (TRACK EVT) button to switch between the Event display (Note, Control Change, etc.) and the Control display (System Exclusive, etc.). Make sure to set the record channel from another display (e.g., BASIC display; page 112) beforehand. CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 114
    , press the [J] (SAVE) button to save the assembled style data. From here, you can store the settings of all channels (RHYTHM1, RHYTHM2, set to ON in the REC CHANNEL display (page 112), OFF does not appear and is not available. 114 CVP-209/207 If you change the section and channel
  • Yamaha CVP-207 | Owner's Manual - Page 115
    . F Calls up the Style display and G lets you store the edited accompaniment style data. H I J Determines the settings for each of the Groove parameters (see the list below). 1 2 3 4 minimum effect, "B" types produce medium effect, and "C" types produce maximum effect. CVP-209/207 115
  • Yamaha CVP-207 | Owner's Manual - Page 116
    display F and lets you store the edited accompaniment G style data. H I J Determines the settings for each of the Dynamics parameters (see the list you play the keyboard. The more strongly you play the keyboard, the higher the velocity value and, hence, the louder the sound. 116 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 117
    Style Creator Editing the Channel Data In this display, there are five different channel-related edit functions, including Quantize, for editing the recorded accompaniment style data. The operations here apply to - [6LM] (EVENT) buttons to select the desired event type to be removed. CVP-209/207 117
  • Yamaha CVP-207 | Owner's Manual - Page 118
    display provides a variety of style controls- such as determining how the pitch and sound of the recorded style change when playing the chords in the left-hand range of the keyboard automatically selected whenever the preset data is deleted prior to recording a new style, parts. 118 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 119
    and Chord 2 channels, especially when they contain piano or guitar-like chordal parts. Bass Suitable for bass line transposition. This outside the natural range are sounded (e.g., high bass sounds or low piccolo sound). The actual notes that sound are automatically shifted to the set CVP-209/207 119
  • Yamaha CVP-207 | Owner's Manual - Page 120
    REPEAT TAP TEMPO GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON
  • Yamaha CVP-207 | Owner's Manual - Page 121
    XG voices (in XG song data) with the special voices of the CVP-209/207. To use the normal XG voice set, turn this off. Each press of this button switches among the A F various parts/ B G channels. C H DIGITAL STUDIO D I SOUND CREATOR E J DIGITAL RECORDING MIXING CONSOLE BALANCE
  • Yamaha CVP-207 | Owner's Manual - Page 122
    . A F B G C H DIGITAL STUDIO D I SOUND CREATOR E J DIGITAL RECORDING MIXING CONSOLE BALANCE PART CHANNEL ON OFF For details about the song playback. KBD .......... Transposes the pitch of the keyboard. PORTAMENTO TIME When the part is set to Mono (page 59, 90), this CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 123
    for the Natural voices and Regular voices. For details, refer to the Effect Block list (page 124). 2 When the BLOCK parameter is set to REVERB1, CHORUS1, or DSP 3-7 (CVP-209)/ DSP 3-5 (CVP-207), press this to call up the display from which you can change the detailed settings for the effects
  • Yamaha CVP-207 | Owner's Manual - Page 124
    up the display F for storing the effect. G H I J 4 5 6 7 8 Determines the level of the effect (return level). This is not available when BLOCK is set to "DSP1," PARAMETER is set to "CONNECTION," and VALUE is set to "Insertion" or when BLOCK is set to "DSP 3-7" (CVP-209) / "DSP 3-5" (CVP-207
  • Yamaha CVP-207 | Owner's Manual - Page 125
    high frequencies in rooms and close spaces where the sound is relatively "dead" and free of echoes. The CVP-209/207 possesses a high grade five-band digital equalizer function. With this function, a final effect-tone control-can be added to the output of your instrument. The explanations here apply to
  • Yamaha CVP-207 | Owner's Manual - Page 126
    the effect blocks are connected or routed in one of two ways: System or Insertion. System applies the selected effect to all parts, while Insertion applies the selected effect to one specific part. Reverb, Chorus and DSP 2 are System effects, and DSP 3 - 7 (CVP-209)/DSP 3 - 5 (CVP-207) are Insertion
  • Yamaha CVP-207 | Owner's Manual - Page 127
    the Volume Balance and Changing Voices - Mixing Console For Regular Voices (CVP-207) Unused DSP blocks are automatically assigned to the active parts. MAIN VOICE DSP3 Dry Rev Send Cho Send DSP Send LAYER the signal flow. DSP1 DRY LINE REVERB 2 CHORUS 2 BRILLIANCE OUT DSP2 CVP-209/207 127
  • Yamaha CVP-207 | Owner's Manual - Page 128
    SETTING 1 2 3 4 DATA ENTRY PIANO FREEZE 1 2 3 4 5 6 7 8 MEMORY DIRECT ACCESS 1 2 3 4 5 6 7 8 EXIT Use the SIGNAL and OVER indicators to determine the appropriate setting (page 152). MIC. SIGNAL VOCAL HARMONY OVER TALK If you connect a microphone to the CVP-209/ 207, you
  • Yamaha CVP-207 | Owner's Manual - Page 129
    lowest pitch, 3 is the highest). When "ON" the lead vocal sound "plays" the CVP-209/207 tone generator system. (However, dynamic changes in the vocal sound do not affect the volume of the tone generator.) Determines which of the CVP-209/207 parts will be controlled by the lead vocal when the Pitch
  • Yamaha CVP-207 | Owner's Manual - Page 130
    the previous display. 2 Select sound output from amps or speakers to match the special character of the room. The sound is divided into several frequency bands, allowing you to correct the sound by raising or lowering the level for each band. The CVP-209/207 features a high grade three-band digital
  • Yamaha CVP-207 | Owner's Manual - Page 131
    1-16: Chords are detected from note data in the specified song channel. I MIC (MICROPHONE) The following parameters determine how the microphone sound is controlled. MUTE When set to OFF, the microphone sound is turned off. VOLUME ......... Adjusts the volume of the microphone sound. CVP-209/207 131
  • Yamaha CVP-207 | Owner's Manual - Page 132
    /TYPE/DEPTH A F B G C H D I E J 1 2 3 4 5 6 7 8 This sets the depth of the DSP effect applied to the microphone sound. This turns the DSP effect applied to the microphone sound ON or OFF. This selects the type of DSP effect to be applied to the microphone sound. 132 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 133
    GUIDE MIN MAX TEMPO STYLE ACMP AUTO FILL IN OTS LINK BREAK INTRO RESET MAIN TAP TEMPO TRANSPOSE RESET ENDING rit. SYNC.STOP SYNC.START START STOP MENU DEMO A HELP B FUNCTION C MENU DIGITAL STUDIO D SOUND CREATOR E DIGITAL RECORDING MIXING CONSOLE BALANCE PART display. CVP-209/207 133
  • Yamaha CVP-207 | Owner's Manual - Page 134
    keyboard-played voices, as well as the amount of effect. Showing the Clavinova Display on a TV - Video Out (page 144) These settings determine the contents of the Video Out signal when outputting the CVP-209/207's display contents to a TV monitor (connected to the VIDEO OUT terminal). Making MIDI
  • Yamaha CVP-207 | Owner's Manual - Page 135
    sound, and represents the number of times a sound wave vibrates in a second. n The Tune function does not affect the Drum Kit or SFX Kit voices. 1 2 3 4 5 6 7 8 Determines the overall pitch of the CVP-209/ 207 in the REGISTRATION MEMORY display (page 85). 1 of the keyboard is transposed,
  • Yamaha CVP-207 | Owner's Manual - Page 136
    -10.2 3.1 -20.3 -2.3 -11.7 -3.1 -27.3 -10.2 -3.9 -7.8 -11.7 7.0 -17.2 -3.9 -7.8 Kirnberger 0.0 -10.2 -7.0 -6.3 -14.1 -2.3 -10.2 -3.1 -7.8 -10.2 -3.9 -11.7 Arabic1 0.0 0 -50.0 0.0 0.0 0.0 0.0 0.0 0.0 -50.0 0.0 0.0 Arabic2 0.0 0 0.0 0.0 -50.0 0.0 0.0 0.0 0.0 0.0 0.0 -50.0 136 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 137
    for reading of data. n Channel Refers to the MIDI channel (page 158). The channels are assigned as follows: Song 1 - 16 Accompaniment Style 9 - 16 n The guide lamps light in appropriate right- and left-hand parts. n Phrase Mark This data specifies a certain location in the song data. CVP-209/207 137
  • Yamaha CVP-207 | Owner's Manual - Page 138
    to your playing strength (in the Auto Accompaniment section of the keyboard). The CVP-209/207 lets you automatically enable Sync Stop (page 66) simply by quickly pressing/releasing keys in the Auto Accompaniment section of the keyboard. This parameter lets you set the length of the key-hold
  • Yamaha CVP-207 | Owner's Manual - Page 139
    depending on the particular pedal you've connected to the [AUX PEDAL] jack. For example, pressing down on one pedal may turn the selected function on, while pressing a different make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation. CVP-209/207 139
  • Yamaha CVP-207 | Owner's Manual - Page 140
    via the Mixing Console display (page 122). It does not work for Natural voices. PITCHBEND* Bend notes up or down while pedal is pressed. This can only be set to the AUX pedal and the CVP-209/207's damper pedal. MODULATION* Applies a vibrato effect to notes played on the keyboard. The depth of
  • Yamaha CVP-207 | Owner's Manual - Page 141
    you are accustomed to playing the keyboard part in C. To match up the keys, keep the Master Transpose setting at "0," set the Keyboard Transpose to "2," and set Song Transpose to "-3." This brings the keyboard part up in pitch and the song data down to your comfortable singing key. CVP-209/207 141
  • Yamaha CVP-207 | Owner's Manual - Page 142
    and "Regist (-) Pedal" sequence in this are set to the same pedal, display by using the "Regist (+) Pedal" takes [BACK]/[NEXT] priority. buttons or the by pressing the [EXIT] button. Registration Sequence data is included as part of the Registration Memory bank file. To 87. 142 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 143
    Sound Creator - are always and automatically called up. From this page, you can set the on/off status for each part the desired part. B C D E Normally, Layer and Left parts. 1 2 independently for each part. Setting Harmony note will sound. This section of the keyboard. This parameter is
  • Yamaha CVP-207 | Owner's Manual - Page 144
    on the keyboard will be played by the Main voice, and the added harmony note will be played by the Layer voice. Main Harmony is applied only to the Main part. Layer Harmony is applied only to the Layer part. When the Layer part is turned off, Harmony is not applied. Showing the Clavinova Display on
  • Yamaha CVP-207 | Owner's Manual - Page 145
    disconnected from the CVP-209/207's tone generator section so that no sound is output when you play the keyboard or use the controllers. For example, this allows you to use an external MIDI sequencer to play the CVP-209/207's internal voices, and use the CVP-209/207 keyboard to record notes
  • Yamaha CVP-207 | Owner's Manual - Page 146
    case, the external device must be connected to the CVP-209/207 MIDI IN terminal, and must be transmitting an appropriate MIDI clock signal. I Transmit Clock Turns MIDI clock transmission on or off. When this is set to "OFF," no MIDI clock or START/STOP data is transmitted. I Receive Transpose When
  • Yamaha CVP-207 | Owner's Manual - Page 147
    by the MIDI data received on the corresponding channel. LAYER LEFT The LAYER part is controlled by the MIDI data received on the corresponding channel. The LEFT part is controlled by the MIDI data received on the corresponding channel. KEYBOARD MIDI note data received by the Clavinova plays the
  • Yamaha CVP-207 | Owner's Manual - Page 148
    - 20.0 seconds). 1 2 3 4 (range of 0 - 20.0 seconds). Determines the sound. 1 2 3 4 5 6 7 8 Determines which sound is used for the metronome. Bell Off Conventional metronome sound, with no bell. Bell On Conventional metronome sound sound. When you start the song
  • Yamaha CVP-207 | Owner's Manual - Page 149
    sound is off. Determines whether or not the voice bank and number are shown in the PRESET page of the VOICE display (page 55). This is useful when you want to check the proper bank select MSB/LSB values and program number to specify when selecting the voice from an external MIDI device. CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 150
    copied. • Make sure to read the section "Using the Floppy Disk Drive (FDD) and Floppy Disks" on page 6. Copying from Disk to Disk As shown below, first copy the data of the original (source) disk to the CVP-209/207, then copy the data to the backup (destination) disk. 1 Press the [F] button
  • Yamaha CVP-207 | Owner's Manual - Page 151
    the disk drive are changed to western characters (page 41). Restoring the Factory-programmed Settings of the CVP-209/207 - System Reset This operation lets you restore the CVP-209/207 to its original factory settings. These settings include System Setup, MIDI Setup, User Effect, Music Finder, and
  • Yamaha CVP-207 | Owner's Manual - Page 152
    Clavinova outputs your vocals or guitar sounds through the built-in speakers. 1 Connect connect them to one of the PHONES jacks (standard 1/4" phone jacks) located on the underside of the keyboard 154 7 AUX PEDAL TO HOST HOST SELECT MIDI THRU OUT IN Mac MIDI PC-1 PC-2 L L+R R L L+R R (LEVEL
  • Yamaha CVP-207 | Owner's Manual - Page 153
    the sound is output to the external device at a fixed level, regardless of the [MASTER VOLUME] control setting. 5 Showing the display of the Clavinova on a connected TV monitor (VIDEO OUT) You can connect the Clavinova to a television or video monitor to display the lyrics in your song data or LCD
  • Yamaha CVP-207 | Owner's Manual - Page 154
    computer's serial port and the Clavinova's TO HOST terminal, you need to install a specified MIDI driver (Yamaha CBX driver for Windows). You can download this driver from the XG Library on the Yamaha Web site: http://www.yamaha-xg.com • Never use MIDI cables longer than 15 meters. 154 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 155
    cable, 8 bit). Set the CVP-209/207 HOST SELECT switch to the "MAC" (Data transfer rate is 31,250 bps). Set the MIDI interface clock in the sequencer you are using to 1 MHz. For details, refer to the owner's manual for the particular software you are using. Clavinova Mac MIDI PC-1 PC-2 • When the
  • Yamaha CVP-207 | Owner's Manual - Page 156
    Clavinova MIDI OUT Mac MIDI PC-1 PC-2 For details about the necessary MIDI settings for computer and sequence software you are using, refer to the relevant owner's manuals. In the above example, the actual acoustic sounds of the pianist's performance are captured in the recording as audio data
  • Yamaha CVP-207 | Owner's Manual - Page 157
    on the CVP-209/207, such as playing the keyboard and selecting voices, are processed and stored as MIDI data. The auto accompaniment styles and songs also consist of MIDI data. MIDI is an acronym that stands for Musical Instrument Digital Interface, which allows electronic musical instruments to
  • Yamaha CVP-207 | Owner's Manual - Page 158
    The messages transmitted/received by the CVP-209/207 are shown in the MIDI Data Format and MIDI Implementation Chart in the separate Data List. What You Can Do With MIDI The following MIDI settings can be made on the Clavinova: • MIDI templates (preset MIDI setups for various applications) (page
  • Yamaha CVP-207 | Owner's Manual - Page 159
    on the CVP-209/207 is automatically recorded as SMF Format 0. • Song data loaded to the CVP-209/207 is automatically saved as SMF Format 0 regardless of the original format. I ESEQ This sequence format is compatible with many of Yamaha's MIDI devices, including the Clavinova series instruments
  • Yamaha CVP-207 | Owner's Manual - Page 160
    • Song data recorded on the CVP-209/207 using voices in the [XG] category is XG-compatible. I DOC This voice allocation format is compatible with many of Yamaha's MIDI devices, including the Clavinova series instruments.This is also a common format used with various Yamaha software. 160 CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 161
    CVP-209/207: Keyboard Stand Assembly CAUTION I Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. I Assembly should be carried out by at least two persons. I Be sure
  • Yamaha CVP-207 | Owner's Manual - Page 162
    CVP-209/207: Keyboard the proper voltage has been selected, connect the AC power cord to the AC parts left over? ¡ Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? ¡ Move the Clavinova to an appropriate location. • Does the Clavinova
  • Yamaha CVP-207 | Owner's Manual - Page 163
    Troubleshooting Problem • The Clavinova does not turn on; there is no power. • A click or pop is heard when the power is turned on or off. • Noise is heard from the Clavinova's speakers. • The display is too bright or too dark to read. • The keyboard volume is low compared to that of the Auto
  • Yamaha CVP-207 | Owner's Manual - Page 164
    sound cannot be recorded. • MIDI data is not transmitted or received via the MIDI terminals, even when MIDI cables are connected properly. • When a voice is changed, the previously selected effect is changed. • There is a slight difference in sound quality between notes played on the keyboard
  • Yamaha CVP-207 | Owner's Manual - Page 165
    of Session Styles Number of Pianist Styles Number of Piano Combo Styles Fingering Style Creator OTS (One Touch Setting) OTS link Music Finder Edit : available CVP-209 CVP-207 AWM Dynamic Stereo Sampling 640 ✕ 480 dots backlit graphic LCD 88 keys (A-1 - C7) 256 192 390 voices + 480 XG
  • Yamaha CVP-207 | Owner's Manual - Page 166
    Format Preset Songs Guide Guide Lamp Lyrics Score Recording Record Channels Floppy Disk (2HD,2DD) Flash Memory (internal) Flash Availability Tempo Range Tap Tempo Metronome Sound Buttons Regist Sequence Freeze Demo Language Help Direct Access Piano setting button (including Piano Lock) Master Volume
  • Yamaha CVP-207 | Owner's Manual - Page 167
    Settings for Notation 82 [DIGITAL RECORDING] button 14, 18, 94, 110 [DIRECT ACCESS] button 18, 48 Direct Access Chart 49 Disk 150 Disk format 159 Disk Orchestra Collection 19 Displaying Music Notation 81 Displaying the Lyrics 84 Displaying Upper Level pages 45 DOC 160 CVP-209/207 167
  • Yamaha CVP-207 | Owner's Manual - Page 168
    VOLUME] knob 19, 152 Inputting and Editing Lyrics 109 Instant Selection of Displays 48 INTRO 67 [INTRO] button 18, 31, 65 K Karao-Key 79 Key cover 16 KEY SIGNATURE 82 Keyboard guide lamps 19, 79 Keyboard Percussion 56 Keyboard Touch 141 Keyboard/Panel 141 KEYWORD 71, 72 Kirnberger 136
  • Yamaha CVP-207 | Owner's Manual - Page 169
    an external recorder 153 Playing Two Voices Simultaneously 26 Playing Voices 25 PORTAMENTO TIME 122 Practice Functions 79 Practicing Music with the Guide Functions 80 PRESET drive 40 Preset MIDI Templates 145 Punch In/Out 103 Pure Major 136 Pure Minor 136 Pythagorean 136 CVP-209/207 169
  • Yamaha CVP-207 | Owner's Manual - Page 170
    MIDI Data 147 display 86 REGISTRATION MEMORY [1] - [8] buttons 19, 85 Registration Sequence 142 Regular Voices 89 RELEASE 91 Remove Event 117 Repeat Playback of a Specific Range 78 [REPEAT] button 18, 78 Replace 72 Resonance 91 Restoring the Factory-programmed Settings of the CVP-209/207
  • Yamaha CVP-207 | Owner's Manual - Page 171
    146 Transmitting MIDI Data 146 TRANSPOSE [E] [ ] buttons 18, 141 Transpose Assign 141 Tune 122 TUNING 122 Tuning the Overall Pitch 135 U UP 45 USER drive 40 USER EFFECT 124, 151 Using the USB terminal on your computer with a USB/MIDI interface (UX256, etc 156 Using Your Clavinova with
  • Yamaha CVP-207 | Owner's Manual - Page 172
    following: 1. Read all Safety Instructions, Installation Instructions, Spe- cial Message Section items, and any Assembly Instructions found in this manual BEFORE making any connections, including connection to the main supply. 2. Main Power Supply Verification: Yamaha products are 8. This product
  • Yamaha CVP-207 | Owner's Manual - Page 173
    product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product
  • Yamaha CVP-207 | Owner's Manual - Page 174
  • Yamaha CVP-207 | Owner's Manual - Page 175
    269-5311 EUROPE THE UNITED KINGDOM Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: 053-460-2312 [CL] 23 HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical
  • Yamaha CVP-207 | Owner's Manual - Page 176
    Web site (English only) http://www.yamahaclavinova.com/ Yamaha Manual Library (English version only) http://www2.yamaha.co.jp/manual/english/ M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2001 Yamaha Corporation ??????? ???AP???.?-03C0 Printed in Indonesia
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
OWNER’S MANUAL
OWNER’S MANUAL
CVP-209/207
CVP-209/207