Yamaha DGX-500 Owner's Manual - Page 79
Load, Insert the, oppy disk into the disk drive., Press the [LOAD] button., Select the, le to load.
View all Yamaha DGX-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Disk Operations Load Once you've saved your User data onto a floppy disk, you can reload that data back to the DGX-500/300. You can also load style data from the included disk or commercially available Yamaha Style File disks. 1 Insert the floppy disk into the disk drive. 2 Press the [LOAD] button. Press the [LOAD] button again to exit from the LOAD screen. 3 Select the file to load. Use the [+]/[-] buttons. L-U Filename This case is user file. Style file indicates "L-S". L-U Filename • If the [LOAD] button is pressed when there is no floppy disk inserted into the disk drive, a "No disk" message appears at the top of the display, and all disk operations will be disabled. • If the disk contains no file, the display shows "No file" indicating that the Load function is not possible. 4 Press the [EXECUTE] button. YES Sure? 5 Execute the Load operation. Press the [+] button ("YES"), and the Load operation will start. Once started, the operation cannot be canceled. As the file is loading, "Loading" will appear on the top line of the display. L-U Loading • When data is loaded from a floppy disk to the DGX-500/300, the data already in the memory of the DGX-500/300 will be replaced by the data on the disk. Save important data into a disk file before doing the operation. • While the file is loading (the DISK IN USE lamp is lit), never eject the floppy disk or turn the power off. When the operation is completed, the following display briefly appears. Complete If you do not intend to load the file, press the [-] button ("NO") instead of the [+] button ("YES"). To exit from the LOAD screen, press the [LOAD] button. 79