Yamaha DIO8 Owner's Manual

Yamaha DIO8 Manual

Get Yamaha DIO8 PDF manuals and user guides View all Yamaha DIO8 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha DIO8 manual content summary:

  • Yamaha DIO8 | Owner's Manual - Page 1
    DIGITAL IO BOX Owner's Manual V516420 R2 1 IP 20 E 100 CR Printed in Japan
  • Yamaha DIO8 | Owner's Manual - Page 2
    instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may OFF" and "ON", please try to eliminate the problem by using one of the following measures: Relocate , please contact Yamaha Corporation of America, Electronic Service Division, 6600
  • Yamaha DIO8 | Owner's Manual - Page 3
    the type stated in this Owner's Manual or as marked on the unit. Failure continue using the unit without heeding this instruction, fire or electrical shock may result. is easily accessible. If some trouble or malfunction occurs, immediately turn the rear of the unit be supported by fitting a pair metal
  • Yamaha DIO8 | Owner's Manual - Page 4
    designed for the Yamaha PM1D digital audio mixing system. The DIO8 outputs and inputs digital signals (such as ADAT, TASCAM, and AES/EBU) as well as analog signals to and from the DSP1D/DSP1D-EX engine controlled via the CS1D control surface. Up to eight digital I/O cards and analog I/O cards can be
  • Yamaha DIO8 | Owner's Manual - Page 5
    DSP unit (DSP1D/DSP1D-EX) connected to the DIO8. If more than one connector is connected, either A or B will be automatically selected as the connector for control, according to the connection status of the INPUT and OUTPUT jacks. If there is a problem such as an incorrectly connected DSP unit or if
  • Yamaha DIO8 | Owner's Manual - Page 6
    expansion, but it is not operative in the current software version. The following table shows optional Yamaha digital I/O cards and analog I/O cards that can be installed into the slots of dig- ital IO unit DIO8. Card Format Input Output It is not possible to install and use a total of five or
  • Yamaha DIO8 | Owner's Manual - Page 7
    rail inside the slot as shown below and insert the card into the slot. Push in the card until the connector on the card is securely plugged into the terminal inside the DIO8. 1 2 Guide rail A (1-4/1-8) 4. Fix the card by tightening the two screws. Caution: Be sure to tighten the screws securely
  • Yamaha DIO8 | Owner's Manual - Page 8
    ) BNC connector BNC connector Slots Eight slots (slots 1-8) are available on the DIO8 for installing digital I/O cards and analog I/O cards. Slot 1 supports a serial interface card (not released yet). q Optional interface cards Card Format MY8-TD TASCAM MY8-AT ADAT MY8-AE AES/EBU MY8-AD
  • Yamaha DIO8 | Owner's Manual - Page 9
    YAMAHA CORPORATION Pro Audio & Digital Musical Instrument Division P.O. Box 3, Hamamatsu, 430-8651, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
V516420 R2 1 IP 20
100 CR Printed in Japan
Owner’s Manual
DIGITAL IO BOX
E