Yamaha DPX-1300 Owner's Manual

Yamaha DPX-1300 Manual

Get Yamaha DPX-1300 PDF manuals and user guides View all Yamaha DPX-1300 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha DPX-1300 manual content summary:

  • Yamaha DPX-1300 | Owner's Manual - Page 1
    U DPX-1300 DIGITAL CINEMA PROJECTOR PROJECTEUR CINEMA NUMERIQUE
  • Yamaha DPX-1300 | Owner's Manual - Page 2
    this unit in the space below. Model: Serial No.: The serial number is located on the bottom of the unit. Retain this Owner's Manual in a safe place for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus
  • Yamaha DPX-1300 | Owner's Manual - Page 3
    Model Name: Yamaha Electronics Corporation 6660 Orangethorpe Avenue Buena Park, CA90620 714-522-9105 714-670-0108 Projector DPX-1300 This device complies with Part instructions found in the users manual try to eliminate the problem by using one case of radio or TV interference, relocate/reorient the
  • Yamaha DPX-1300 | Owner's Manual - Page 4
    . Follow the lamp replacement procedure described in this manual. For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note
  • Yamaha DPX-1300 | Owner's Manual - Page 5
    Setting up the DPX-1300 12 Projection distance 13 Projection image position 14 7 Connection 15 Connecting to AV components 15 Connecting to computer devices ......... 16 8 Projection 17 Checking installation and connections ... 17 Turning the projector Maintenance 58 Troubleshooting 60
  • Yamaha DPX-1300 | Owner's Manual - Page 6
    or impact • Vibration and impact can damage parts of this unit. 5. Places where this unit that no light other than the projector light falls directly on the screen POS ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU ASPECT INPUT RESET HIDE STILL S VIDEO INPUT A LIGHT HDMI VIDEO B DVI D4
  • Yamaha DPX-1300 | Owner's Manual - Page 7
    projector from your viewing position. 2 Uses the DMDTM device 720p DarkChip3TM The projector images The DPX-1300 is equipped with an HDMI terminal, which is set to become settings without changing memory numbers when you change from watching a DVD to watching a HDTV image for which you have set
  • Yamaha DPX-1300 | Owner's Manual - Page 8
    Adjustable feet Makes small adjustments to the projection angle Lamp cover Ventilation inlet 1 2 3 4 5 1 STANDBY/ON ESCAPE MENU PATTERN SETTING ASPECT INPUT LAMP COVER TEMP FAN DIGITAL CINEMA PROJECTOR DPX-1300 6 7 8 9 0 1 LED Indicators The main unit is equipped with 5 indicators
  • Yamaha DPX-1300 | Owner's Manual - Page 9
    B HDMI INPUT A OUT IN REMOTE RS-232C TRIGGER OUT RGB/YPBPR/YCBCR D4 VIDEO G/Y B/PB/CB R/PR/CR HD/SYNC PR/CR (R, or color difference signal) 6 HD/SYNC (Horizontal sync signal, composite sync signal) 232C (D-sub 9 pin) For use in servicing this unit. t TRIGGER OUT Outputs control signals
  • Yamaha DPX-1300 | Owner's Manual - Page 10
    Switches on and off the built-in test pattern. y MENU button Switches on and off the settings and adjustments menu display. u (Enter) button Sets values when the DPX-1300 is displaying the menu. When the menu is not displayed, the DPX-1300 displays the in-line image quality adjustment menu
  • Yamaha DPX-1300 | Owner's Manual - Page 11
    DPX-1300 is currently displaying. Press again to cancel this effect. a Remote control code switch Selects ID-1 or ID-2 when operating two main units with one remote control. You can set RESET S VIDEO B AINPUT LIGHT HDMI AUTO ESCAPE V.POS IRIS ZOOM SETTING FOCUS PATT MENU ID-1 HIDE
  • Yamaha DPX-1300 | Owner's Manual - Page 12
    to control the DPX-1300 without having to be within range of the remote sensor. AUTO ESCAPE V.POS IRIS ZOOM SETTING FOCUS PATT MENU ID-1 STILL RESET ASPECT INPUT ID-2 VIDEO S VIDEO B HIDE AINPUT LIGHT HDMI 1 D4 DVI 4 2 INPUT 5 3 6 DVI INPUT B HDMI INPUT A OUT IN
  • Yamaha DPX-1300 | Owner's Manual - Page 13
    -232C TRIGGER OUT RGB/YPBPR/YCBCR D4 VIDEO G/Y B/PB/CB R/PR/CR HD/SYNC VD S-VIDEO VIDEO AUTO V. POS ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU ASPECT INPUT RESET HIDE STILL S VIDEO INPUT A LIGHT HDMI VIDEO B DVI D4 MEMORY 1 2 3 4 5 6 AUTO V. POS ZOOM FOCUS IRIS
  • Yamaha DPX-1300 | Owner's Manual - Page 14
    5 Preparation Before projection, install the main unit and a screen, connect the main unit to an AV component or computer, and adjust the projection image. You can begin projection as soon as installation is complete. Refer to the sections below for information on how to install the main unit to
  • Yamaha DPX-1300 | Owner's Manual - Page 15
    Step1 Set up the projector and screen • Install the projector • Install the screen ☞ page 12 - 14 Step2 Connect an AV component or computer • Connect AV components • Connect a computer ☞ page 15 - 16 Step3 Turn the power on and selecting an image for projection • Turn on the projector power 5
  • Yamaha DPX-1300 | Owner's Manual - Page 16
    Setting up the DPX-1300 There are four ways of mounting the projector. Mounting method Placed on a table Mounted on the ceiling Projection method A: From in front of a screen B: From behind a semi-translucent screen C: From in front of a screen D: From behind a semi-translucent screen ◆ Mounting
  • Yamaha DPX-1300 | Owner's Manual - Page 17
    information in the table below to determine the best location to place the projector in to suit your screen size. be a deviance of a few percent. Since the DPX-1300 has a 16:9 panel, the ideal installation location for use with a 4:3 screen
  • Yamaha DPX-1300 | Owner's Manual - Page 18
    instructions ) If you mount this unit on a tabletop, you can use the adjusters the position of the projection image. Rotate the movable part of the two screw-type adjusters at the front setting up so the screen and projector form a right angle. 14
  • Yamaha DPX-1300 | Owner's Manual - Page 19
    depending on the component you are attempting to connect. Refer to the owner's manual for the component. • Insert all plugs firmly to avoid noise or other problems. HDMI cable (digital) DVI cable (digital) DVI INPUT B HDMI INPUT A OUT IN REMOTE RS-232C TRIGGER OUT RGB/YPBPR/YCBCR D4 VIDEO
  • Yamaha DPX-1300 | Owner's Manual - Page 20
    does not support PC signals. Input INPUT A INPUT B DVI Signal type RGB (Analog) RGB (Analog) RGB (Digital) Connector type BNC jack x 5 D-sub 15 pin DVI connector DVI INPUT B HDMI INPUT A OUT IN REMOTE RS-232C TRIGGER OUT RGB/YPBPR/YCBCR D4 VIDEO G/Y B/PB/CB R/PR/CR HD/SYNC VD
  • Yamaha DPX-1300 | Owner's Manual - Page 21
    the main unit power turned on? Is the screen installed correctly? "Setting up the DPX-1300" ☞ page 12 Image source component Are the components connected correctly? Select an image for projection and image adjustment Turn on the projector power. Begin playback of the source image for adjustment.
  • Yamaha DPX-1300 | Owner's Manual - Page 22
    /YCBCR D4 VIDEO G/Y B/PB/CB R/PR/CR HD/SYNC VD S-VIDEO VIDEO AC inlet button STANDBY/ON button AUTO V. POS ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU ASPECT INPUT Remote Control STANDBY/ON ESCAPE MENU PATTERN SETTING ASPECT INPUT LAMP COVER TEMP FAN Main unit 2. Press the
  • Yamaha DPX-1300 | Owner's Manual - Page 23
    Main unit AC inlet DVI INPUT B HDMI INPUT A OUT IN REMOTE RS-232C TRIGGER OUT RGB/YPBPR/YCBCR D4 VIDEO G/Y B/PB/CB R/PR/CR HD/SYNC VD S-VIDEO VIDEO 2. If you wish to place the DPX-1300 in standby mode, press the STANDBY/ON button again. The lamp changes to a half lit state, and
  • Yamaha DPX-1300 | Owner's Manual - Page 24
    Selects S-Video signals received from AV components connected to the S VIDEO jack. INPUT A INPUT B HDMI • Component • RGB PC • RGB TV • Component • RGB PC • RGB TV • Auto • Component • RGB TV : Selects component signals received from the INPUT A BNC jacks. : Selects RGB signals received from
  • Yamaha DPX-1300 | Owner's Manual - Page 25
    a submenu available for selection. 4. Select an appropriate setting from [Component], [RGB PC], or [RGB TV] and press the button to confirm the setting. Memo Input signal VIDEO S VIDEO INPUT A INPUT B HDMI DVI D4 Component RGB PC RGB TV • If you set your laptop or notebook computer to display on
  • Yamaha DPX-1300 | Owner's Manual - Page 26
    ESCAPE MENU cursor button STANDBY/ON ESCAPE MENU PATTERN SETTING ASPECT INPUT RESET HIDE STILL S VIDEO INPUT A LIGHT HDMI VIDEO B DVI D4 MEMORY 1 2 3 4 5 6 ASPECT INPUT LAMP COVER TEMP FAN ASPECT button button 1. Press the ASPECT button. The display aspect selection
  • Yamaha DPX-1300 | Owner's Manual - Page 27
    change to the most appropriate mode. In this case, manually select a suitable setting. Normal Projects images with their original display aspect. Depending both screen sides. There are two types: SDTV for 4:3 images, and HDTV for 16:9 images. Cinema Squeeze Removes the black bar from cinescope size
  • Yamaha DPX-1300 | Owner's Manual - Page 28
    Selecting an input signal Input signal type Input image Standard 4:3 image Letter box Squeeze 14:9 image HDMI RGB PC All Normal Cinema Scope Normal Squeeze Display aspect Normal Smart Zoom Zoom Subtitle Zoom Cinema Zoom Squeeze Squeeze Cinema Squeeze 14:9 Zoom
  • Yamaha DPX-1300 | Owner's Manual - Page 29
    exit from the test display, press the PATT or PATTERN button. ESCAPE MENU PATTERN SETTING Color bar pattern ASPECT INPUT LAMP COVER TEMP FAN ◆ Adjusting the vertical position - V.POS button If the center of the screen is not in line with the center of the lens of the DPX-1300, use the V.POS
  • Yamaha DPX-1300 | Owner's Manual - Page 30
    button SETTING • When you want to use the test pattern to adjust image focus press the PATT button on the remote control, or the PATTERN button on the main unit before carrying out step 1. ASPECT INPUT LAMP COVER TEMP FAN 2. Press the h or g button to adjust the focus of the projected image
  • Yamaha DPX-1300 | Owner's Manual - Page 31
    DPX-1300 to suit your viewing environment by adjusting image quality, initial settings, for certain types of input signal (Video, Component, RGB TV, RGB PC). Menu groups appear in the upper area of guide Displays helpful instructions when special operations are necessary. Image Move Menu Window
  • Yamaha DPX-1300 | Owner's Manual - Page 32
    Iris Level Adjustment ● Signal Display Aspect Ratio Overscan 3D Y/C separation Progressive Mode Color Space Conversion Setup Level Sync Type INPUT B Signal INPUT B Sync Type HDMI Signal DVI Signal Auto Power Off Auto Input Search Display Language Lamp Running Time Reset 4 ● Setup 5 Location 12
  • Yamaha DPX-1300 | Owner's Manual - Page 33
    (HDMI TV Rear 9: Display Language Off 14: Remote Control ID English ID 1 Deutsch ID 2 Español 15: Menu Color Français Monotone 6 Italiano Color 7 Portuguêsa 16: Trigger Out Lamp Fan 10: Lamp Running Time RS-232C No 17: Baud Rate Yes 9600bps 11: Reset 19200bps All Settings
  • Yamaha DPX-1300 | Owner's Manual - Page 34
    brightness of the image. • Increase luminance (0 to +50): Setting this figure too high results in a White white saturated image without images. Black Input signal White Gamma (Input signal) Video/S-Video/Component/RGB TV/RGB PC Changes the way the unit responds to changes in the shadings
  • Yamaha DPX-1300 | Owner's Manual - Page 35
    By the default setting, the DPX-1300 automatically selects BT709 (RGB color coordinate for High-Definition Television) for HDTV (High- Definition limits of the 0.5 projector. 9 W (Color temperature and h UV) Color Temp. (Input signal) Video/S-Video/Component/RGB TV/RGB PC Adjusts color
  • Yamaha DPX-1300 | Owner's Manual - Page 36
    settings. Adjusting [Gain] resets [Color temp.] based on color coordinate settings the color temperature setting unchanged. Refer to most appropriate setting, based on color temp and RGB color balance settings. y /RGB TV/RGB PC Adjusts the analog input signal gain and offset settings. Adjust
  • Yamaha DPX-1300 | Owner's Manual - Page 37
    TV/RGB PC Sets the aspect ratio for projecting an image from an input signal. See "Selecting a display aspect for projecting images", page 22. Overscan (Input signal) Video/S-Video/Component/RGB TV 3D space coefficient for BT.601 type signal. • [HDTV] : Color space coefficient for BT.709 type
  • Yamaha DPX-1300 | Owner's Manual - Page 38
    Choices: Off/3DNR/DVNR • [3DNR] :3D Noise Reduction This function is only available for SDTV, EDTV, and HDTV. Reduces noise in the luminance and color level and white level in the input signal for HDMI and DVI signals. This function is only available when RGB TV is selected. Choices: 16 to 235/0 to
  • Yamaha DPX-1300 | Owner's Manual - Page 39
    A Signal INPUT A Sync Type INPUT B Signal INPUT B Sync Type HDMI Signal DVI Signal Auto Power Off Auto Input Search Display Language Lamp Running Time Reset Menu items Selects the color system to use for video input signals. Usually, set this parameter to Auto to have the unit automatically detect
  • Yamaha DPX-1300 | Owner's Manual - Page 40
    image is higher than the right side Remote Control Sensor Remote Control ID Lens Adjustment Lock Lamp Power Increase the value in the positive (+) direction Decrease the value in the negative (-) direction Sets the remote control sensor. The main unit has two remote control sensors, one on the
  • Yamaha DPX-1300 | Owner's Manual - Page 41
    it to the fan, and to [RS-232C] to receive ON/OFF signals through the RS-232C terminal. Choices: Lamp/Fan/RS-232C Sets the transmission speed of the RS-232C terminal. This setting becomes valid from the next time you switch the unit on. Choices: 9600bps/19200bps/38400bps/57600bps/115200bps 9 Menu
  • Yamaha DPX-1300 | Owner's Manual - Page 42
    V. POS ZOOM FOCUS IRIS SETTING PATT ESCAPE MENU 5 ASPECT INPUT RESET HIDE STILL S VIDEO INPUT A LIGHT HDMI VIDEO B DVI D4 MEMORY settings (Does not affect items with no default setting). 4 5 6 Main Unit STANDBY/ON 4 ESCAPE PATTERN MENU 1 2 SETTING ASPECT INPUT LAMP
  • Yamaha DPX-1300 | Owner's Manual - Page 43
    ESCAPE MENU ASPECT INPUT STANDBY/ON ESCAPE MENU PATTERN SETTING ASPECT INPUT LAMP COVER TEMP FAN Remote Control Main Unit or Remote Control Main Unit 1. Press the MENU button to open the menu screen. Image Move Menu Window Signal Initial Setup Memo • If you have opened the
  • Yamaha DPX-1300 | Owner's Manual - Page 44
    the [Lens Adjustment Lock] mode set to [On]. Memo • The setting method depends on the item selected. Image Move Menu Window Signal Initial Location V Keystone Correction H Keystone Correction Remote Control Sensor Remote Control ID Lens Adjustment Lock Lamp Power Menu Color Message Trigger Out
  • Yamaha DPX-1300 | Owner's Manual - Page 45
    contain a submenu. Image Move Menu Window Signal Initial Color System INPUT A Signal INPUT A Sync Type INPUT B Signal INPUT B Sync Type HDMI Signal DVI Signal Auto Power Off Auto Input Search Display Language Lamp Running Time Reset Auto Component Auto RGB TV Auto Component Component Off Off
  • Yamaha DPX-1300 | Owner's Manual - Page 46
    the menu screen will be highlighted. 5. Press the h, g, +, or - button to adjust the setting for the item. 6. If you select R (red), G (green), B (blue), Y (yellow select an item. 0.5 0.0 0.0 : Edit Move Men Signal nu Window Initial Setup x=0.640 y=0.330 Press the button. y 0.35 0.3 Color
  • Yamaha DPX-1300 | Owner's Manual - Page 47
    Example: Using the color temperature fixed mode Use this mode when you want to adjust the RGB coordinate while keeping the color temperature setting unchanged. 1. Select [Color Adjustment] in the [Image] group from the main menu. 2. Press the + button to enter submenus. 3. Select [WRGB] from the
  • Yamaha DPX-1300 | Owner's Manual - Page 48
    RESET button resets the parameters to their default settings (corresponding to the signal input: HDTV or SDTV) when the Color coordinate adjustment All Settings All Memory Current Memory Memory 4 VIDEO Move Menu Window Signal Initial Setup Press " " to reset to factory settings.
  • Yamaha DPX-1300 | Owner's Manual - Page 49
    [Initial] Running Time]. [Lamp Image Move Menu Window Signal Initial Color System INPUT A Signal INPUT A Sync Type INPUT B Signal INPUT B Sync Type HDMI Signal DVI Auto Power Off Auto Input Search Display Language Lamp Running Time Reset Auto Component Auto RGB TV Auto Component Component Off
  • Yamaha DPX-1300 | Owner's Manual - Page 50
    the button to switch between capital (A to E) and non capital (a to e) letters. 3. Use the + or - button to select an appropriate setting. Image Move Menu Window Signal Initial Black Level White Level Gamma Hue Saturation Sharpness Gain Sharpness Type Color Adjustment White Peaking Iris Level
  • Yamaha DPX-1300 | Owner's Manual - Page 51
    to adjust image quality without obstructing the image during projection. See "Menu group items and functions" (page 30 - 37) for information on each setting. Black Level Indicates that you can use the h and g buttons to change the position of the inline menu. Inline menu
  • Yamaha DPX-1300 | Owner's Manual - Page 52
    Adjustment 3D Y/C Separation Progressive Mode Color Space Conversion Setup Level Overshoot Supp. Range Overshoot Supp. Level Noise Reduction Type Noise Reduction Level Horiz. Display Position Vert. Display Position Signal Level All memory numbers have default settings. Since the DPX-1300 saves
  • Yamaha DPX-1300 | Owner's Manual - Page 53
    the submenu. or Remote Control Main Unit Image Move Menu Window Signal Initial Black Level White Level Gamma Trim Hue Saturation Sharpness or Remote Control Main Unit Main Unit 5. Press the button to recall the settings in the selected memory. Memo • When the unit receives a signal with a
  • Yamaha DPX-1300 | Owner's Manual - Page 54
    additionally for each SDTV/HDTV/RGB-PC input. or Remote Control Main Unit 1. Recall the memory number you wish to lock. 2. Select a memory number status. 3. Press the button. " " appears beside locked memory numbers. Image Move Menu Window Signal Initial Black Level
  • Yamaha DPX-1300 | Owner's Manual - Page 55
    ◆ Memory copy Copy the settings stored in a memory number to another memory number. 1. Recall Control Main Unit 3. Press the + button to open the submenu. or Image Move Menu Window Signal Initial Black Level White Level Gamma Trim Hue Saturation Sharpness Gain Sharpness Type Color Adjustment
  • Yamaha DPX-1300 | Owner's Manual - Page 56
    Main Unit or 5. Press the + button to display the Move Menu Window confirmation screen. Image Signal Initial Setup 6. Press the h or g Main Unit or Remote Control Main Unit 7. Press the button. The settings stored in the source memory number are copied to the destination memory number
  • Yamaha DPX-1300 | Owner's Manual - Page 57
    the selected memory (corresponding to the signal input from the currently selected input jack) to their default settings. 1. From the main menu, select Move Menu Window [Initial] [Reset] [Current Image Signal Initial Setup Memory]. or Remote Control Main Unit 2. Press the + button to
  • Yamaha DPX-1300 | Owner's Manual - Page 58
    Setup or Remote Control Main Unit 2. Press the + button to display the confirmation screen. Reset + : Enter All Settings All Memory Current Memory Memory 4 VIDEO Image Move Menu Window Signal Initial Setup Press " " to reset all Memory. ESC : Return 3. Press the button to reset the
  • Yamaha DPX-1300 | Owner's Manual - Page 59
    projectors and image signals and their explanations. Please refer to it when using this manual. For an explanation of vocabulary used in the menu, refer to "Menu group items and functions" ( ☞ page 30 - 37). Ceiling mount bracket The mounting a DVI or HDMI transmitter and a equipment. HDTV High-
  • Yamaha DPX-1300 | Owner's Manual - Page 60
    High-Definition Multimedia Interface are trademarks or registered trademark of HDMI Licensing LLC. * The "HD ready" Logo is a trademark of EICTA. Compatible signal types The following tables show the types and formats of signals the DPX-1300 can project. Signals other than those listed here may
  • Yamaha DPX-1300 | Owner's Manual - Page 61
    59.940 50.000 RGB/YCBCR4:4:4/YCBCR4:2:2 (*3) RGB/YCBCR4:4:4/YCBCR4:2:2 (*3) RGB/YCBCR4:4:4/YCBCR4:2:2 (*3) RGB/YCBCR4:4:4/YCBCR4:2:2 (*3) RGB/YCBCR4:4:4/YCBCR4:2:2 (*3) (*3) You cannot select YCBCR4:2:2 mode manually. This mode only available when you set the unit to HDMI Auto mode. English 57
  • Yamaha DPX-1300 | Owner's Manual - Page 62
    cloth to prevent scratching. 3. Press the filter hook on the underside of the main unit to remove the filter. 4. Firmly attach the new filter. The lamp does not light if the filter is incorrectly attached. Warning • Contact a YAMAHA dealer or service center if you require replacement filters. 58
  • Yamaha DPX-1300 | Owner's Manual - Page 63
    the screen. In this case, follow the instructions below to replace the lamp cartridge. For details on replacement of lamp cartridges, consult the store where you purchased the DPX-1300. Warning • Be sure to use the replacement lamp cartridge PJL-427. Other lamp cartridges are not suitable for use in
  • Yamaha DPX-1300 | Owner's Manual - Page 64
    Troubleshooting Troubleshooting Problem Cause The DPX-1300 does not The power cable is not plugged in. turn on. You attempted to turn on The DPX-1300 immediately after turning it off. No picture. The filter cover is not correctly attached. The lamp cover is not correctly attached. The lens
  • Yamaha DPX-1300 | Owner's Manual - Page 65
    the "REMOTE CONTROL ID" in the setting menu. Tightly attach the filter cover. Tightly attach the lamp cover. Replace the lamp with a new one. Replace the lamp with a new one. Check that the ventilation slots are not covered. Contact the store where the DPX-1300 was purchased. • This unit uses
  • Yamaha DPX-1300 | Owner's Manual - Page 66
    the PC or HDMI signal currently being input setting number is displayed for two seconds. The lamps has reached its recommended This message is displayed when the power switch is turned on if the lamp running time replacement time. Please replace is set to [On]. Appears in the menu operation guide when
  • Yamaha DPX-1300 | Owner's Manual - Page 67
    red / blinking red rapidly Meaning Electrical fault. Standby Preparing for operation. Operating Cooling the lamp. Blinking red: Error in the LAMP/COVER/TEMP system Blinking red rapidly: Error in the FAN system LAMP COVER TEMP FAN Unlit Blinking red Lit red Unlit Lit red Unlit Lit red Unlit Lit
  • Yamaha DPX-1300 | Owner's Manual - Page 68
    f=24.3 - 38.9 mm F=2.7 - 5.0, Electronic zoom(x 1.6), Electronic focus, Electronic lens shift 270 W SHP lamp 60-200 inch (16:9) 800 - 400 ANSI lm (depends on Iris Setting) 2500:1 to 5000:1 (depends on Iris Setting) • Input Color system VIDEO S VIDEO D4 VIDEO INPUT A/INPUT B NTSC, PAL, SECAM, NTSC4
  • Yamaha DPX-1300 | Owner's Manual - Page 69
    237.5 9"-3/8 SETTING 495 19"-1/2 DIGITAL CINEMA PROJECTOR DPX-1000 INPUT MENU LAMP COVER TEMP FAN STANDBY/ON ASPECT ESCAPE PATTERN (257.5 10"-1/8) 119.1 4"-3/5 124.6 4"-7/8 465.4 18"-5/16 132.1 5"-3/16 297.4 11"-3/4 192.6 7"-9/16 G/Y D4 VIDEO RGB/YPBPR/YCBCR DVI INPUT B HDMI 11
  • Yamaha DPX-1300 | Owner's Manual - Page 70
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
DPX-1300
U
DIGITAL CINEMA PROJECTOR
PROJECTEUR CINEMA NUMERIQUE