Yamaha DSP-A2 Owner's Manual - Page 72

REMOTE CONTROLLER Ⅵ Clearing learned functions To Clear a Learned Function To Clear All Learned Functions 1 To clear a learned key function, press the LEARN button using a ball-point pen or similar object. To clear a macro you made, press the MACRO button. or CLEAR LEARN MACRO TRANSMIT /LEARN Flashes slowly. 2 Press and hold the CLEAR button using a ball-point pen or similar object. CLEAR LEARN MACRO 3 Holding the CLEAR button pressed, press and hold the key whose function you want to clear until the indicator flashes 3 times. CD TRANSMIT /LEARN Flashes. To clear two or more functions sequentially, do not release the CLEAR button, and repeat this step. Note If you clear a learned function of a key, the key is restored by the originally preset function. (except the keys which are originally preset with no function.) 1 Select the kind of key functions all of which you want to clear by using the MACRO switch on the side panel of the remote controller. SLOW QUICKOFF MACRO OFF: Select this position if you want to clear all of the learned functions except macros. QUICK: Select this position if you want to clear all of the macros you made. SLOW: Select this position if you want to clear all of the learned functions including macros. 2 Press the CLEAR button using a ball-point pen or similar object. CLEAR LEARN MACRO TRANSMIT /LEARN Flashes slowly. * If one of the following is made after you press the CLEAR button, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. Press the CLEAR button again. • MACRO switch is switched to another position. • Another key is pressed. • There is no operation for about 30 seconds. 3 Press and hold the CLEAR button again. While holding down the CLEAR button, press and hold the MASTER VOLUME and keys simultaneously until the indicator flashes 7 times. MUTE TRANSMIT /LEARN Flashes. 70