Yamaha EMX5000-20 Owner's Manual - Page 32

30 Specifications Specifications s General specifications Maximum output power Frequency response Total harmonic distortion Hum & noise (Average, Rs=150Ω) (with 20 Hz-20 kHz BPF) Maximum voltage gain Crosstalk at 1 kHz Input channel equalization ST Input channel equalization CH peak indicators CH signal indicators Meters Power amp select switch Limiter LIMIT indicators Graphic equalizer Internal digital effect 1 Internal digital effect 2 Foot switch (FC5) Protection circuit (Power amp) Fan circuit Phantom power Option Power requirement/ Power consumption SPEAKERS: 500 W+500 W/4Ω @0.5% THD at 1 kHz 325 W+325 W/8Ω @0.5% THD at 1 kHz BRIDGE: 1000 W/8Ω @0.5% THD at 1 kHz 20 Hz-20 kHz +1 dB, -3 dB @1 W output into 8Ω (SPEAKERS OUT) 20 Hz-20 kHz +1 dB, -3 dB @+4 dB output into 600Ω (ST OUT, ST SUB OUT, MONO OUT, AUX SEND, EFFECT SEND) Less than 0.5% @20 Hz-20 kHz, 250 W output into 4Ω (SPEAKERS OUT) Less than 0.3% @20 Hz-20 kHz, +14 dB output into 600Ω (ST OUT, ST SUB OUT, MONO OUT, AUX SEND, EFFECT SEND) -128 dB equivalent input noise, -65 dB residual output noise (SPEAKERS OUT) -95 dB residual output noise (ST OUT, ST SUB OUT, AUX SEND) -84 dB (ST OUT, MONO OUT) ST master/MONO master fader at nominal level and all channel On switches off and all channel fader at minimum. -64 dB (68 dB S/N) (ST OUT, MONO OUT) ST master fader at nominal level and one channel On switch on and one channel fader at nominal level and one channel Gain control at nominal level. -81 dB (AUX SEND) Master fader at nominal level and all channel On switches off and all channel level control at minimum. -80 dB (EFFECT SEND) All channel level control at minimum. 108 dB 84 dB 80 dB 90 dB 78 dB 58 dB INPUT A/B to SPEAKERS OUT INPUT A/B to ST OUT, MONO OUT INPUT A/B to AUX SEND (PRE) INPUT A/B to AUX SEND (POST) INPUT A/B to EFFECT SEND ST CH IN to ST OUT 68 dB adjacent input, 68 dB input to output ±15 dB Maximum HIGH 10 kHz shelving* MID 250 Hz-5 kHz peaking LOW 100 Hz shelving* * Turn over/roll off frequency of shelving: 3 dB below maximum variable level. ±15 dB Maximum HIGH 10 kHz shelving* MID 2.5 kHz peaking LOW 100 Hz shelving* * Turn over/roll off frequency of shelving: 3 dB below maximum variable level. Red LED on each channel lits when POST EQ signal reaches the level -3 dB below clipping. Green LED on each channel lits when POST EQ signal reaches the level -10 dB. 13 points LED meter 500W + 500W, 300W + 300W, 100W + 100W Comp. : THD≥0.5% (SPEAKERS OUT) Turn on : THD≥0.5% (SPEAKERS OUT) 9 bands (63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz), ±12 dB Maximum 16 programs, parameter control 16 programs, parameter control, tap delay control, foot switch (DIGITAL EFFECT ON/OFF, TAP) Digital effect 2 mute: on/off, Tap delay POWER switch on/off mute, DC detection, TEMP (heatsink temp. ≥90°C) stop - low speed (50°C) - variable - high speed (70°C) +48 V (balanced input) FC5 (Foot switch), RK-124 (EMX5000-12) USA and Canada:120 V AC 60 Hz, 400 W Europe: 230 V AC 50 Hz, 550 W Other: 240 V AC 50 Hz, 550 W EMX5000-20/EMX5000-12-Owner's Manual