Home > Yamaha Manuals > Speakers > Yamaha HS80M > Manual Viewer

Yamaha HS80M Owner's Manual

Yamaha HS80M - HS 80M Speaker Manual

Get Yamaha HS80M - HS 80M Speaker manuals and user guides
UPC - 086792837536
Free Yamaha HS80M manuals!

Yamaha HS80M manual table of contents:

  • Yamaha HS80M | Owner's Manual - Page 1
    Powered Near-field Reference Monitors & Subwoofer OWNER'S MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE INSTRUCCIONES EN DE FR ES ZH JA
  • Yamaha HS80M | Owner's Manual - Page 2
    ... qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been ... the letter L or coloured RED. • This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.(3 wires)
  • Yamaha HS80M | Owner's Manual - Page 3
    ... t auf. English Thank you for choosing a YAMAHA powered monitor speaker or powered subwoofer. In order to take maximum advantage of the speaker's features and ensure ... longevity, please read this manual carefully before using powered monitor speaker or powered subwoofer. Keep the manual ...
  • Yamaha HS80M | Owner's Manual - Page 4
    ...over time. Consult qualified Yamaha service personnel about replacing defective components. • Illustrations in this manual are for explanatory purposes only, ...• Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change ...
  • Yamaha HS80M | Owner's Manual - Page 5
    ...final sound. This short tutorial provides a basic guide to help you maximize the performance of your Yamaha HS-series monitor speakers. Listening vs. Monitoring You'd... for input, so you can choose the type that best matches your system requirements. HS80M/HS50M/HS10W Owner's Manual 5 English
  • Yamaha HS80M | Owner's Manual - Page 6
    ... If you’re connecting your HS speakers directly to a mixer such as input one of the Yamaha MG-series mixers, input they should usually be connected to the mixerମ.be feeding your recorder or DAW (Digital Audio Workstation) in a production type setup. MG Series HS80M/HS50M/HS10W Owner’s Manual
  • Yamaha HS80M | Owner's Manual - Page 7
    ... more exaggerated the speaker's bass response is likely to become, and some compensation - whether you compensate mentally or use some equalization - will ... always possible to achieve ideal symmetry, but it's worth getting as close as possible. HS80M/HS50M/HS10W Owner's Manual 7 English
  • Yamaha HS80M | Owner's Manual - Page 8
    ... 12 o'clock corresponds to a nominal input level of about +4 dB. ● Since no subwoofer is being used in this setup, set the LOW CUT switch to "FLAT". ● When set to "-2 ... to "-2 dB" to attenuate the highs slightly if you find the sound too bright. 8 HS80M/HS50M/HS10W Owner's Manual
  • Yamaha HS80M | Owner's Manual - Page 9
    ... control to about 12 o'clock to set the nominal input level to approximately +4dB. If you're using the HS50M set the HS10W LEVEL control to about 10 o'clock, and if you're using the HS80M set it to about 11 o'clock. You can ...
  • Yamaha HS80M | Owner's Manual - Page 10
    ... R speakers can be connected to any convenient stereo output pair via the HS10W subwoofer, while the center and rear speakers will be connected to individual output ...the console's advanced surround mixing and bass management facilities. L R LFE OMNI Out LS RS HS80M/HS50M/HS10W Owner's Manual
  • Yamaha HS80M | Owner's Manual - Page 11
    .... If you're using the HS50M set the HS10W LEVEL control to about 10 o'clock, and...desired relative balance with the subwoofer. * If you're using the HS50M with a digital mixer, set the HS10W LEVEL ...If you're using the HS80M with a digital mixer set the HS10W LEVEL control to about 10 o'clock....
  • Yamaha HS80M | Owner's Manual - Page 12
    ... the mid-frequency range. Setting the switch to the "0" position produces a flat frequency response. With the "+2 dB" setting, the mid range is boosted by 2 dB. With the... is cut by 2 dB. With the "-4 dB" setting, the range below 500 Hz is cut by -4 dB. HS80M/HS50M/HS10W Owner's Manual
  • Yamaha HS80M | Owner's Manual - Page 13
    ...the LOW CUT switch is on. ' HIGH CUT control Use the HIGH CUT control to set the cutoff frequency of the signal output from the HS10W from 80 Hz to 120 Hz. ( LEVEL ... the power cord to the subwoofer, then insert the power cord plug into the AC outlet. HS80M/HS50M/HS10W Owner's Manual 13 English
  • Yamaha HS80M | Owner's Manual - Page 14
    ...General Specifications Type Crossover Frequency Overall Frequency Response Dimensions (W x H x D) Weight Speaker Components Speaker ...-1/16") 11.3 kg Powered Subwoofer - 30 Hz-180 Hz (-10 dB) 300 x ... mm (11-13/16 x 13-3/4 x 15-3/16") 12.5 kg HS50M HS80M HS10W -10 dBu/10 k ohms -10 dBu/600 ohms...
  • Yamaha HS80M | Owner's Manual - Page 15
    HS10W 300 (11-13/16") 386 (15-3/16") 350 (13-3/4") Unit ...30 -40 20 100 1k 10k 0 -10 -20 -30 -40 20 100 ... RESPONSE (dB) 0 -10 -20 -30 -40 20 100 1k 10k FREQUENCY ... FILTER LOWCUT P.AMP HF LF HS10W OUTPUT LOW CUT ON/OFF L ch... OUT SPEAKER 67 Español HS80M HS10W Français Deutsch English...
  • Yamaha HS80M | Owner's Manual - Page 16
    ...OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, ...2441 Yamaha Pro Audio global web site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.....co.jp/manual/ PA13 U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation ©...



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Yamaha HS80M - HS 80M Speaker Manual