Yamaha HTR-4065 Owners Manual - Page 60

Playing back music in multiple rooms (HTR-5065 only) The Zone A/B function allows you to play back an input source in the room where the unit is installed (Zone A) and in another room (Zone B). For example, you can turn on Zone A (turn off Zone B) when you are in the living room, and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can turn on both zones when you want to enjoy the same input source in those rooms simultaneously. Preparing Zone B Connect the device that will be used in Zone B to the unit. Caution • Remove the unit's power cable from the AC wall outlet before connecting speakers. • Ensure that the core wires of the speaker cable do not touch one another or come into contact with the unit's metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit, "Check SP Wires" will appear on the front display when the unit is turned on. Study room (Zone B) Living room (Zone A) • Multichannel sources are mixed down to 2 channels and output to the zone B. • The same input source and volume setting are applied to both zones. • You can automatically enable/disable the audio output to Zone A/B in conjunction with a scene selection (p.35) Connect the speakers placed in Zone B to the unit with speaker cables. To utilize the SURROUND BACK/BI AMP/ZONE B jacks for Zone B speakers, set "Power Amp Assign" (p.69) in the "Setup" menu to "ZoneB" after connecting the power cable to an AC wall outlet. PB Y OR OUT The unit (rear) FRONT CENTER SPEAKERS SURROUND SURROUND BACK/BI AMP /ZONE B SINGLE SUBWOOFER 1 2 9 3 1 2 4 5 Zone B Zone A PLAYBACK ➤ Playing back music in multiple rooms (HTR-5065 only) En 60