Yamaha HTR-4065 Owners Manual - Page 82

CODE SET SOURCE RECEIVER HDMI 1 2 3 4 AV 1 2 3 4 5 6 AUDIO A V-AUX USB TUNER NET B ZONE FM AM PRESET TUNING INFO MEMORY MOVIE SLEEP BD DVD SUR. DECODE STRAIGHT MUSIC ENHANCER DIRECT SCENE TV NET RADIO SETUP OPTION ENTER VOLUME RETURN DISPLAY TOP MENU MODE POP-UP MUTE MENU 1 2 3 4 5 6 7 8 9 INPUT MUTE 0 10 TV TV VOL TV CH ENT CODE SET SOURCE/RECEIVER Controlling external devices with the remote control You can use the unit's remote control to operate external devices (such as BD/DVD players) if you have registered the remote control code of the external device. • You cannot control an external device that does not have a remote control sensor. • Ensure that the remote control ID of the external device is set to "ID1". If any other ID is selected, the remote control operations may not work properly. • If the unit's remote control is without batteries for more than 2 minutes, the registered codes may be cleared. If this happens, insert new batteries and register the codes again. 3 Press TV z. 4 Use the numeric keys to enter the 4-digit remote control code. Once the remote control code is successfully registered, SOURCE/RECEIVER blinks twice. If it blinks six times, registration has failed. Repeat from Step 2. ■ TV operations • Under the unit's default settings, the amplifier code (Yamaha: 5098) is set for all the input selection keys. With this setting, you can control HDMI Control-compatible devices connected to the unit with the remote control. (This function may not work depending on the specification of the external device.) Once you have registered the remote control code for your TV, you can control it using the TV operation keys, regardless of the input source selected on the unit. Registering the remote control code for a TV INPUT MUTE Switches the video inputs of the TV. Mutes the audio output of the TV. Numeric keys You can use the unit's remote control to operate a TV if you have registered its remote control code. TV operation keys TV VOL TV CH TV z Adjust the volume of the TV. Switch the channels of the TV Turns on/off the TV. TV operation keys TV z • You can also register your TV's remote control code to the unit's input selection keys (p.83). This would allow you to use the cursor keys or numeric keys to operate the TV (this function may not be available on some TV models). 1 Use "Remote Control Code Search" in the CD-ROM to find your TV's remote control code. • If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes. 2 Press CODE SET using a pointed object such as the tip of a ballpoint pen. SOURCE/RECEIVER blinks twice. Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2. CONFIGURATIONS ➤ Controlling external devices with the remote control En 82