Yamaha HTR-5280 Owner's Manual - Page 33
Normal Stereo Reproduction, Dolby Digital Matrix 6.1 or DTS, ES decoder, Virtual CINEMA DSP and SILENT
UPC - 072874307073
View all Yamaha HTR-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
INTRODUCTION PREPARATION I Dolby Digital Matrix 6.1 or DTS ES decoder If you want to use the Dolby Digital Surround EX or DTS ES software, press 6.1/ES to turn on the Dolby Digital Matrix 6.1 or DTS ES decoder (see "12 6.1/ES AUTO" on page 42 and 58 for details). Remote control BASIC PLAYBACK Normal Stereo Reproduction Press EFFECT to turn off the sound effect for normal stereo reproduction. Press EFFECT again to turn the sound effect back on. EFFECT or Front panel Remote control VIRTUAL DIGITAL PRO LOGIC DSP 6.1/ES SP PCM AB DTS MOVIE THEATER 1 2 PS PTY RT CT PTY HOLD EON STEREO AUTO NEWS INFO AFFAIRS SPORT MEMORY TUNED ZONE 2 SLEEP VOLUME D-TV/LD CBL/SAT VCR 1 VCR2/DVR V-AUX DVD MD/TAPE CD-R TUNER CD PHONO The " c " indicator lights up. I Virtual CINEMA DSP and SILENT CINEMA DSP You can experience the virtual CINEMA DSP sound field by setting "1C REAR L/R SP" on the SET MENU to NONE. The sound field processing is changed to the Virtual CINEMA DSP mode according to the selected DSP program. Virtual CINEMA DSP is performed by using the main speakers. You can also listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. Note • This unit is not set in the virtual CINEMA DSP mode even if "1C REAR L/R SP" is set to NONE in the following cases: - when the 5ch Stereo, DOLBY DIGITAL/Normal or DTS/ Normal program is selected; - when the sound effect is turned off; - when 6CH INPUT is selected as the input source; - when 96-kHz sampling digital signals are input to this unit; - when the Dolby Digital KARAOKE source is played; - when using the test tone; or - when connecting the headphones. y • If the selector dial is set to a position other than the DSP/TUN position, first press DSP and then EFFECT on the remote control. Notes • If you turn off the sound effect, no sound is output from the center and rear speakers. • If you turn off the sound effect while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center and rear speaker channels are mixed and output from the main speakers. • The volume may be greatly reduced when you turn off the sound effect or if you set "10B D-RANGE" on the SET MENU to MIN. In this case turn on the sound effect. BASIC OPERATION ADVANCED OPERATION ADDITIONAL INFORMATION APPENDIX English 29