Yamaha HTR-5280 Owner's Manual - Page 58
ZONE 2 (U.S.A., Canada and Australia models only), Zone 2 Connections
UPC - 072874307073
View all Yamaha HTR-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ZONE 2 (U.S.A., Canada and Australia models only) You can make up a multi-room audio system with this unit. You can enjoy an audio source selected with INPUT l / h (or input selector buttons) in the second room (Zone 2). Only analog signals are sent to the second room. For any source you want to listen to in the second room, you must connect the analog output jack from the source to the corresponding analog input jack on this unit. Zone 2 Connections To use the multi-room functions of this unit, you need the following additional equipment: • An infrared signal receiver in the second room • An infrared emitter in the main room This emitter transmits the infrared signals from the remote control in the second room to the main room (for example, to a CD player). • An amplifier and speakers for the second room y • Since there are so many ways to connect and use this unit in a multi-room installation, we recommend that you consult with the nearest authorized YAMAHA dealer or service center for OUT IN OUT IN REMOTE CONTROL OUT the zone 2 connections which will best meet your requirements. • Some YAMAHA models are able to connect directly to the This unit REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter. I Example of a system configuration and connections Main room ZONE 2 AUDIO OUT Second room Amplifier CD player (or other component) This unit Infrared emitter Remote control Infrared signal receiver REMOTE CONTROL OUT REMOTE CONTROL IN Notes • When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2 volume with the control on the amplifier in the second room. • DO NOT USE the Zone 2 feature for CDs encoded with DTS. 54