Yamaha HTR-5630 Owner's Manual

Yamaha HTR-5630 Manual

Get Yamaha HTR-5630 PDF manuals and user guides View all Yamaha HTR-5630 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha HTR-5630 manual content summary:

  • Yamaha HTR-5630 | Owner's Manual - Page 1
    U HTR-5630 AV Receiver OWNER'S MANUAL
  • Yamaha HTR-5630 | Owner's Manual - Page 2
    INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE your electrician to replace your obsolete outlet. an outside antenna system, extreme care
  • Yamaha HTR-5630 | Owner's Manual - Page 3
    SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) FCC INFORMATION (for US customers) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha
  • Yamaha HTR-5630 | Owner's Manual - Page 4
    temperature changes from electrical shock to the user and/or damage to YAMAHA service personnel when any service TROUBLESHOOTING" section on common operating errors before concluding that this unit is faulty. 17 Before moving this unit, press STANDBY/ON to set . Retain this Owner's Manual in a safe
  • Yamaha HTR-5630 | Owner's Manual - Page 5
    code 44 Controlling other components 45 SETTING THE SPEAKER LEVELS 46 Adjusting the volume during playback 46 Using the test tone 46 ADDITIONAL INFORMATION SOUND FIELD PROGRAM PARAMETER EDITING 47 Changing parameter settings 47 Digital sound field parameter descriptions 48 TROUBLESHOOTING
  • Yamaha HTR-5630 | Owner's Manual - Page 6
    N Set menu for optimizing this unit for your Audio/ Video system N Test tone generator for easier speaker balance adjustment N 6-channel external decoder input N Optical and coaxial digital audio signal jacks N Sleep timer N Remote control with preset manufacturer codes I About this manual
  • Yamaha HTR-5630 | Owner's Manual - Page 7
    , check that the following parts are contained. Remote control SYSTEM POWER POWER STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD D-TV/CBL VCR V-AUX REC DISC SKIP AUDIO 6CH INPUT CODE SET AMP TV ++ VOL CH -- + VOLUME - MUTE INPUT MUTE HALL 1 JAZZ 2 ROCK ENTERTAINMENT 3 4 MUSIC
  • Yamaha HTR-5630 | Owner's Manual - Page 8
    EDIT TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM SILENT PHONES SPEAKERS ON A OFF B STEREO EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE VOLUME INPUT MODE 6CH INPUT INPUT 9 0 qw e RDS MODE/FREQ EON PTY SEEK MODE START r t yu i o p as df
  • Yamaha HTR-5630 | Owner's Manual - Page 9
    -frequency response when the unit is in Bass/Treble control mode. The sound changes 2dB each time you press one of these buttons. Control range: -10 to +10dB. i INPUT MODE Sets the priority for the types of input signals (AUTO, DTS, ANALOG) received when one component is connected to two types of
  • Yamaha HTR-5630 | Owner's Manual - Page 10
    effect speaker channel to adjust. 5 Multi control section Used to change and implement settings. 6 TEST Outputs a test tone for use when adjusting the speaker levels. 7 STANDBY Sets this unit in standby mode. 8 SYSTEM POWER Turns on the power of the unit. 9 SLEEP Sets the sleep timer. 0 6CH INPUT
  • Yamaha HTR-5630 | Owner's Manual - Page 11
    and DTS signals (except the LFE channel) as well as those 2-channel signals without effect sounds, to the main left and right speakers. u NIGHT Sets the unit in night listening mode. i SET MENU Selects the set menu mode. CONTROLS AND FUNCTIONS I Using the remote control STANDBY /ON PRESET/TUNING
  • Yamaha HTR-5630 | Owner's Manual - Page 12
    contains an LFE signal. p Input channel indicator The indicators for the appropriate sound channels light up when a digital signal from a source is played back. a RDS indicator (U.K. and Europe models only) The name(s) of the RDS data offered by the currently received RDS station light(s) up. EON
  • Yamaha HTR-5630 | Owner's Manual - Page 13
    MAIN L B R MAIN L MAIN A OR B : 6Ω MIN./SPEAKER CENTER REAR (SURROUND) R L CENTER : 6Ω MIN./SPEAKER REAR : 6Ω MIN./SPEAKER 6CH INPUT jacks (page 13) Antenna input terminals (page 12) SUBWOOFER OUTPUT jack (page 16) This jack is reserved for factory use. Do not connect any equipment to this
  • Yamaha HTR-5630 | Owner's Manual - Page 14
    • Use the AUDIO jacks on this unit for a video component which does not have optical digital output jack. However, multi-channel reproduction cannot be obtained with audio signals input from the AUDIO jacks. I Connecting a digital TV/cable TV Connect the video signal output jack on your component to
  • Yamaha HTR-5630 | Owner's Manual - Page 15
    player Connect the coaxial digital output jack on your CD player to the DIGITAL INPUT CD jack on this unit. y • Use the AUDIO jacks on this or to record from CD players. I Connecting a CD recorder or MD recorder Connect the input jacks on your CD recorder or MD recorder to the MD/CD-R OUT (REC) jacks
  • Yamaha HTR-5630 | Owner's Manual - Page 16
    (included) Indoor FM antenna (included) I Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it to the terminals on this antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. FREQUENCY STEP switch (
  • Yamaha HTR-5630 | Owner's Manual - Page 17
    left and right, CENTER, SURROUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a DVD/SACD player. DIGITAL INPUT CD 2 /CD-R OUT (REC) MAIN COAXIAL OPTICAL DVD 1 SURROUND SUB WOOFER CENTER
  • Yamaha HTR-5630 | Owner's Manual - Page 18
    but also for reproducing the LFE (low-frequency effect) channel with high fidelity when playing back Dolby Digital or DTS signals. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. I Speaker placement Refer to the following diagram when you place
  • Yamaha HTR-5630 | Owner's Manual - Page 19
    cables. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION • Use speakers with the specified impedance shown on the rear panel of this unit. • Do not let the bare
  • Yamaha HTR-5630 | Owner's Manual - Page 20
    built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections
  • Yamaha HTR-5630 | Owner's Manual - Page 21
    DVD D-TV/CBL VCR V-AUX REC DISC SKIP TV ++ AUDIO 6CH INPUT CODE SET AMP + 1 1 Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on the power of this unit. SYSTEM POWER STANDBY /ON or Front panel Remote control The level of the main volume, and then the current DSP program
  • Yamaha HTR-5630 | Owner's Manual - Page 22
    "BASIC MENU", press u until it displays PRESET/CH "BASIC MENU". 3 Press j / i to enter into the BASIC menu. The front panel display changes as shown here: 4 Press u / d to change the display to the setting you want to alter. SETUP Changes the speaker and amplifier settings to suit the size of the
  • Yamaha HTR-5630 | Owner's Manual - Page 23
    SOUND INPUT OPTION BASIC SYSTEM SETTINGS 1 SETUP Press j / i to alter the settings for each parameter. Use d to move to the next setting. 1 ROOM Choose from S/M/L. 2 SUBWOOFER Choose either of YES/NONE. 3 SPEAKERS Choose from 2/3/4/5 spk. CANCEL 4 SET/CANCEL Choose either of SET/CANCEL. SET NO
  • Yamaha HTR-5630 | Owner's Manual - Page 24
    BASIC SYSTEM SETTINGS Setting the unit to match your speaker system Follow the instructions below to set the amplifier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and j / i to alter the parameter setting. Factory default settings are
  • Yamaha HTR-5630 | Owner's Manual - Page 25
    DISC SKIP AUDIO 6CH INPUT CODE SET AMP TV ++ VOL CH - - + VOLUME - MUTE INPUT MUTE HALL 1 JAZZ 2 ROCK ENTERTAINMENT 3 4 MUSIC TV THTR MOVIE1 MOVIE2 5 6 7 8 /DTS 9 NIGHT 0 6.1/5.1 +10 STEREO ENTER 1 5 7 8 1 Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on
  • Yamaha HTR-5630 | Owner's Manual - Page 26
    on the input source and surround sound settings you use. PROGRAM HALL 1 JAZZ 2 ROCK ENTERTAINMENT 3 4 MUSIC TV THTR MOVIE1 MOVIE2 or 5 6 7 8 /DTS 9 NIGHT 0 6.1/5.1 +10 STEREO ENTER I When you have finished using this unit Press STANDBY/ON (STANDBY on the remote control) to set this
  • Yamaha HTR-5630 | Owner's Manual - Page 27
    , the "t" indicator may flash. While this indicator is flashing, the unit can only reproduce DTS source. If you want to play a normal PCM source immediately, change the input mode back to AUTO. - When the input mode is set to AUTO and a search or skip operation is performed during playback of
  • Yamaha HTR-5630 | Owner's Manual - Page 28
    PHONES SPEAKERS ON A OFF B STEREO EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE VOLUME INPUT MODE 6CH INPUT INPUT 3 on the power again. • If the unit receives a Dolby Digital or DTS signal when the input mode is set to AUTO, the DSP program (No. 7-9)
  • Yamaha HTR-5630 | Owner's Manual - Page 29
    channels by selecting PRO LOGIC or PRO LOGIC II in program No. 9. STANDBY /ON PRESET/TUNING FM/AM EDIT TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM SILENT PHONES SPEAKERS ON A OFF B STEREO EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE VOLUME INPUT
  • Yamaha HTR-5630 | Owner's Manual - Page 30
    ON/OFF to turn off the output of all the speakers. Notes • This feature is not available when 6CH INPUT is selected or the unit is receiving a digital signal with a sampling frequency greater than 48 kHz. • The sound from the LFE channel will be mixed and output from the headphones. I Normal stereo
  • Yamaha HTR-5630 | Owner's Manual - Page 31
    your listening room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA's DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the
  • Yamaha HTR-5630 | Owner's Manual - Page 32
    DTS + Matrix 6.1 decoder for adding a rear center channel (the rear center channel is outputted from virtual rear center speaker). You can select CINEMA-DSP programs to optimize these decoders and the DSP sound patterns depending on the input rock concert. 6 TV THEATER/ Mono Movie This program is
  • Yamaha HTR-5630 | Owner's Manual - Page 33
    the multi-surround speaker systems of the 35-mm film theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital Digital/DTS decoder for multi-channel reproduction of the original sound • Dolby Pro Logic/Pro Logic II decoder for multi-channel reproduction of 2-channel
  • Yamaha HTR-5630 | Owner's Manual - Page 34
    of sound and sound localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality sound designed for movie theaters into your home. With this unit's MOVIE THEATER programs, you can use Dolby Digital or DTS technology to recreate a dynamic sound
  • Yamaha HTR-5630 | Owner's Manual - Page 35
    FM/AM EDIT TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM SILENT PHONES SPEAKERS ON A OFF B STEREO EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE VOLUME INPUT MODE 6CH INPUT INPUT SET MENU VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER AUTO TUNED A AM 1530 kHz
  • Yamaha HTR-5630 | Owner's Manual - Page 36
    FM/AM EDIT TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM SILENT PHONES SPEAKERS ON A OFF B STEREO EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE VOLUME INPUT MODE 6CH INPUT INPUT 1 Press FM/AM to select the FM band. FM/AM 2 Press TUNING MODE (AUTO
  • Yamaha HTR-5630 | Owner's Manual - Page 37
    AUTO/MAN`L MONO MAN`L/AUTO FM SILENT PHONES SPEAKERS ON A OFF B STEREO EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE VOLUME INPUT MODE 6CH INPUT INPUT 34 1 Tune in to a station. See page 31 for tuning instructions. VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER
  • Yamaha HTR-5630 | Owner's Manual - Page 38
    7 8 /DTS 9 NIGHT 0 6.1/5.1 +10 STEREO ENTER LEVEL TITLE - TEST RETURN SELECT SET MENU MENU A/B/C/D/E + PRESET/CH DISPLAY 1 2 1 Press A/B/C/D/E (A/B/C/D/E on the remote control) to select the preset station group. The preset group letter appears on the front panel display and changes each
  • Yamaha HTR-5630 | Owner's Manual - Page 39
    The sleep timer can only be set with the remote control. y • By connecting a commercially available timer to this unit, you can also set a wake-up timer. Refer to the operation instructions of the timer. I Setting the sleep timer SYSTEM POWER POWER STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD
  • Yamaha HTR-5630 | Owner's Manual - Page 40
    PHONES SPEAKERS ON A OFF B STEREO EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE VOLUME INPUT MODE 6CH INPUT INPUT 2 2 SYSTEM POWER POWER STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD D-TV/CBL VCR V-AUX REC DISC SKIP AUDIO 6CH INPUT CODE SET TV
  • Yamaha HTR-5630 | Owner's Manual - Page 41
    tone of the sound output by the system. 1 SPEAKER SET 2 SP DISTANCE (Speaker distance) 3 LFE LEVEL (Low frequency effect level) 4 D. RANGE (Dynamic range) 5 CENTER GEQ (Center graphic equalizer) 6 HP TONE CTRL (Headphone tone control) I INPUT The INPUT area contains parameters concerned with signal
  • Yamaha HTR-5630 | Owner's Manual - Page 42
    j / i once to enter the setup mode of the selected item. - SELECT + The last setting you adjusted appears on the front panel PRESET/CH display. Depending on the menu item, press u/d to select a sub item. - SELECT + PRESET/CH 7 Press j / i repeatedly to change the menu item - SELECT
  • Yamaha HTR-5630 | Owner's Manual - Page 43
    and below) of the rear channel are directed to the speakers selected with "1D BASS". NON Select this if you do not have rear speakers. SET MENU I 1D BASS (bass out mode) LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined
  • Yamaha HTR-5630 | Owner's Manual - Page 44
    of the LFE (low-frequency effect) channel when playing back a Dolby Digital or DTS signal. The LFE signal carries lowfrequency special effect sound which is only added to certain scenes. Control range: SPEAKER 20 to 0 dB HEADPHONE ..... -20 to 0 dB Initial setting: 0 dB 1 Press u / d to select the
  • Yamaha HTR-5630 | Owner's Manual - Page 45
    jack settings (component names for jacks) differ from those of the component. This lets you to change the jack assignment and effectively connect more components. Once assigned, select that component with INPUT l / h (or the input selector buttons on the remote control). I 1A for OPTICAL INPUT jack
  • Yamaha HTR-5630 | Owner's Manual - Page 46
    of the front panel display. Control range: -4 to 0 OPTION 2 MEM. GUARD (memory guard) Use this feature to prevent accidental changes to settings on the unit. Choices: ON, OFF Select ON to protect the following features: • All set menu items • Main, center, rear speakers, and subwoofer levels • DSP
  • Yamaha HTR-5630 | Owner's Manual - Page 47
    made by YAMAHA and other manufacturers. To control other components, you must set up the remote control with the manufacturer codes. Control area I Controlling this unit The shaded areas below can be used to control this unit when the AMP mode is selected. Press AMP to select the AMP mode. Input
  • Yamaha HTR-5630 | Owner's Manual - Page 48
    with the remote control by setting the appropriate manufacturer code. The following table shows factory-set component controls (Library: component category) and the manufacturer code for each. Component control (buttons) Component category Manufacturer Code (Library) CD CD player YAMAHA 199
  • Yamaha HTR-5630 | Owner's Manual - Page 49
    down *2TV mute *2TV input Preset stations (1-8) Preset up Preset down A/B/C/D/E *1 This button functions only when the original remote control of the component has a POWER button. *2 These buttons can operate your TV without switching the input if the manufacturer code is set in D-TV/CBL. *3 These
  • Yamaha HTR-5630 | Owner's Manual - Page 50
    "SET", speaker levels change in response to any changes you make in "BASIC 1 SETUP". Using the test tone Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position. 2,5 AMP TV ++ VOL CH - - + VOLUME - MUTE INPUT MUTE
  • Yamaha HTR-5630 | Owner's Manual - Page 51
    3 4 MUSIC TV THTR MOVIE1 MOVIE2 5 6 7 8 /DTS 9 NIGHT 0 6.1/5.1 +10 STEREO ENTER 3 Press u / d to select the parameter you want to - SELECT + change. PRESET/CH 4 Press j / i to change the parameter setting. - SELECT + PRESET/CH ADDITIONAL INFORMATION English 47
  • Yamaha HTR-5630 | Owner's Manual - Page 52
    three front speakers to varying degrees. A larger value adjusts the center image towards the main left and right speakers. Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from main left and right speakers), initial setting is
  • Yamaha HTR-5630 | Owner's Manual - Page 53
    TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service
  • Yamaha HTR-5630 | Owner's Manual - Page 54
    TROUBLESHOOTING Problem Cause Remedy Refer to page No sound from the center The output level of the center speaker is Raise the level of the center speaker. 46 speaker. set to minimum. "SOUND 1A CENTER" on the set menu Select the appropriate mode for your center 38 is set to NON. speaker
  • Yamaha HTR-5630 | Owner's Manual - Page 55
    of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. The batteries are weak. Replace all batteries with new ones. The manufacture code has not correctly set. Set the code correctly. Try setting another code of the same manufacturer. Even if the
  • Yamaha HTR-5630 | Owner's Manual - Page 56
    Digital Theater Systems) Digital Surround DTS digital surround was developed to replace the analog soundtracks of movies with a 6-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. Digital Theater Systems Inc. has developed a home theater system so
  • Yamaha HTR-5630 | Owner's Manual - Page 57
    any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for "pulse code modulation", the analog signal is encoded as pulses and then modulated for recording. I Sampling
  • Yamaha HTR-5630 | Owner's Manual - Page 58
    Network) Main L/R 150 µV or less • Channel Separation (1 kHz/10 kHz) CD, etc. (5.1 kΩ terminated) to Main L/R ........ h60 dB/h45 dB • Tone Control (Main L/R) BASS Boost/Cut 10 dB/ -1/8" x 5-15/16" x 12-11/16") • Weight 8 kg (17 lbs 10 oz) *Specifications are subject to change without notice. 54
  • Yamaha HTR-5630 | Owner's Manual - Page 59
    LIST OF MANUFACTURER'S CODES TV Yamaha Admiral Aiwa Akai Alba AOC Bell&Howell Bestar Blaupunkt 266 Thomson Toshiba Videch Wards 223 266 292 226 267 215 297 242 297 239 232 VCR Yamaha Admiral Aiwa Akai Audio Dynamic Bell&Howell Blaupunkt Brocsonic Bush Canon CGM Citizen Craig Curtis Mathis Daewoo
  • Yamaha HTR-5630 | Owner's Manual - Page 60
    396 392 394 392 394 397 325 328 376 377 393 396 335 369 389 396 327 376 396 395 396 336 362 DVD player Yamaha DENON Funai HITACHI JVC KENWOOD Mitsubishi Onkyo Panasonic Philips Pioneer RCA Samsung Sharp Sony Toshiba LG/GOLD STAR THOMSON 699 622 623 647 623 624
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
OWNER’S MANUAL
HTR-5630
U
AV Receiver