Yamaha HTR 5740 MCXSP10 Manual - Page 36
Displaying the information about the input, source, STRAIGHT - only two channels
UPC - 027108918907
View all Yamaha HTR 5740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
PLAYBACK Notes • When you play DTS-encoded CD/LDs with the input mode set to AUTO: - This unit automatically switches to the DTS decoding mode. The unit remains in DTS mode (and the t indicator may flash) for up to 30 seconds after playback of the DTS source is complete. To manually release the DTS mode, press INPUT MODE to reselect AUTO. - The DTS decoding mode may be released if search or skip operations are performed for more than 30 seconds. To prevent this, press INPUT MODE to select DTS. • If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player. Displaying the information about the input source You can display the type, format and sampling frequency of the current input signal. 1 Select the input source. CD MD/CD-R TUNER SLEEP DVD DTV/CBL V-AUX MULTI CH IN VCR AMP 3 Press u / d to display the following information about the input signal. PRESET/CH SELECT (Format) in fs rate flg Signal format display. When the unit cannot detect a digital signal it automatically switches to analog input. Number of source channels in the input signal. For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as "3/2/LFE". Sampling frequency. When the unit is unable to detect the sampling frequency "Unknown" appears. Bit rate. When the unit is unable to detect the bit rate "Unknown" appears. Flag data encoded with DTS or Dolby Digital signals that cue this unit to automatically switch decoders. 2 Press AMP to select the AMP mode, then press STRAIGHT (EFFECT) so that "STRAIGHT" appears in the display. AMP STRAIGHT then ENTER EFFECT STRAIGHT 32