Yamaha HTR 5740 MCXSP10 Manual - Page 48

SET MENU SET MENU You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. ■ BASIC SETUP Use to quickly setup basic system parameters (see page 22). ■ MANUAL SETUP Use to adjust speaker and system settings. 1 SOUND MENU Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for video signal processing delays when using LCD monitors or projectors. y Most of the parameters described in SOUND MENU are set automatically when you perform "BASIC SETUP" (see page 22). You can use SOUND MENU to make further adjustments. Item Features Page A)SPEAKER SET Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over frequency. 46 B)SP LEVEL Adjusts the output level of each speaker. 47 C)SP DISTANCE Adjusts the delay time of each speaker. 47 D)CENTER GEQ Adjusts the tonal quality of the center speaker. 47 E)LFE LEVEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 47 F)D. RANGE Adjusts the dynamic range for Dolby Digital or DTS signals. 47 G)AUDIO SET Customizes the muting level and audio delay. 48 2 INPUT MENU Use to reassign digital input/outputs and select the input mode. Item A)I/O ASSIGN B)INPUT MODE Features Assigns jacks according to the component to be used. Selects the initial input mode of the source. Page 48 49 3 OPTION MENU Use to adjust the optional system parameters. Item A)DISPLAY SET B)MEMORY GUARD C)PARAM. INI D)ZONE SET Features Adjusts the brightness of the display and converts video signals. Locks sound field program parameters and other SET MENU settings. Initializes the parameters of a group of sound field programs. Specifies the location of the speakers connected to the SPEAKERS B terminals. Page 49 49 50 50 44