Yamaha HTR 5740 MCXSP10 Manual - Page 60
Resetting parameters to the factory, presets, Repeat steps 2 through 4 as necessary
UPC - 027108918907
View all Yamaha HTR 5740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
EDITING SOUND FIELD PARAMETERS 5 Repeat steps 2 through 4 as necessary to change other program parameters. Note You cannot change parameter values when "MEMORY GUARD" is set to ON. If you want to change the parameter values, set "MEMORY GUARD" to OFF (see page 49). Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again. ■ Resetting parameters to the factory presets To reset a certain parameter Select the parameter you want to reset, then press j / i repeatedly to select the factory preset (the display pauses momentarily at the factory preset before proceeding to the next value). To reset all parameters Use PARAM. INI (see page 50). 56