Yamaha HTR 5740 MCXSP10 Manual - Page 64
Problem, Cause, Remedy, Refer to, effect speakers. - check speaker wires
UPC - 027108918907
View all Yamaha HTR 5740 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
TROUBLESHOOTING Problem The sound suddenly goes off. Only the speaker on one side can be heard. Only the center speaker outputs substantial sound. No sound from the effect speakers. No sound from the center speaker. No sound from the surround speakers. No sound from the surround back speaker. No sound from the subwoofer. Cause Remedy Refer to page The protection circuitry has been activated Check that the impedance selector setting is correct. 20 because of a short circuit, etc. Check that the speaker wires are not touching each - other and then turn this unit back on. The sleep timer has turned the unit off. Turn on the power, and play the source again. - The sound is muted. Press MUTE to cancel a mute. 26 Incorrect cable connections. Connect the cables properly. If the problem persists, 11 the cables may be defective. Incorrect balance settings in SET MENU. Adjust the SP LEVEL settings. 47 When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, and the front and surround speakers output effect sounds. The sound field programs are turned off. Press STRAIGHT (EFFECT) to turn them on. 31 You are using a source or program combination that does not output sound from all channels. Try another sound field program. 27, 39 The output level of the center speaker is Raise the level of the center speaker. 47 set to minimum. "CENTER" in SET MENU is set to NONE. Select the appropriate setting for the center speaker. 46 One of the Hi-Fi DSP programs (except for 6ch Stereo) has been selected. Try another sound field program. 27, 39 The output level of the surround speakers Raise the output level of the surround speakers. 47 is set to minimum. "SURR LR" in SET MENU is set to NONE. Select the appropriate setting for the surround left and 46 right speakers. A monaural source is being played with Press STRAIGHT (EFFECT) to turn on the sound - STRAIGHT. fields. "SURR LR" in SET MENU is set to If the surround left and right speakers are set to 46 NONE. NONE, the surround back speaker setting is automatically set to NONE. Select the appropriate setting for the surround speakers. "SURR B" in SET MENU is set to Select LRG or SML. 46 NONE. "BASS OUT" in SET MENU is set to Select SWFR or BOTH. 46 FRONT when a Dolby Digital or DTS signal is being played. "BASS OUT" in SET MENU is set to Select BOTH. 46 SWFR or FRNT when a 2-channel source is being played. The source does not contain low bass signals. 60