Yamaha HTR-6030 Owner's Manual

Yamaha HTR-6030 Manual

Get Yamaha HTR-6030 PDF manuals and user guides View all Yamaha HTR-6030 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha HTR-6030 manual content summary:

  • Yamaha HTR-6030 | Owner's Manual - Page 1
    U HTR-6030 AV Receiver OWNER'S MANUAL
  • Yamaha HTR-6030 | Owner's Manual - Page 2
    INSTRUCTIONS Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE antenna or cable system. This will prevent damage to the product
  • Yamaha HTR-6030 | Owner's Manual - Page 3
    safety instructions 24 Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI
  • Yamaha HTR-6030 | Owner's Manual - Page 4
    manual carefully. Keep it in a safe place for future reference. 2 Install this sound system connections are cable Yamaha service personnel when any service Troubleshooting" section on common operating errors before concluding that this unit is faulty. 18 Before moving this unit, press STANDBY/ON to set
  • Yamaha HTR-6030 | Owner's Manual - Page 5
    43 Using set menu 44 1 SOUND MENU 45 2 INPUT MENU 48 3 OPTION MENU 50 Remote control features 51 Using remote control on the SCENE feature........... 51 Controlling this unit, a TV, or other components.... 52 Setting remote control codes 54 Advanced setup 55 PREPARATION Connections 10 Rear
  • Yamaha HTR-6030 | Owner's Manual - Page 6
    modes ◆ Remote control with preset remote control codes Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. "SILENT CINEMA" is a trademark of YAMAHA CORPORATION. "DTS" and "DTS Digital Surround" are registered
  • Yamaha HTR-6030 | Owner's Manual - Page 7
    started ■ Checking the supplied accessories Check that you received all of the following parts. Remote control POWER POWER STANDBY POWER TV AV MULTI CH this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR
  • Yamaha HTR-6030 | Owner's Manual - Page 8
    your home theater. Video monitor Front left speaker Front right speaker Subwoofer Surround right speaker Preparation: Check the items In these steps, you need the following supplied accessories. ❏ Indoor FM antenna ❏ AM loop antenna Center speaker DVD player Surround left speaker Step 1: Set
  • Yamaha HTR-6030 | Owner's Manual - Page 9
    wires touch any metal part of this unit. To the surround right speaker To the surround left speaker To the center speaker 4 Connect the subwoofer cable to the input jack of the subwoofer and the SUBWOOFER OUTPUT jack of this unit. Subwoofer AV receiver IN MD/ OUT (PLAY) CD-R (REC) OUTPUT SUB
  • Yamaha HTR-6030 | Owner's Manual - Page 10
    DVD 1 R COAXIAL R SUBWOOFER ANTENNA AM GND FM 75 SPEAKERS SURROUND CENTER FRONT B R L R L IN MD/ OUT (PLAY) CD-R (REC) OUTPUT SUB WOOFER R FRONT A L 2 Connect the video cable to the composite video output jack of your DVD player and the DVD VIDEO jack of this unit. AV receiver DVD player
  • Yamaha HTR-6030 | Owner's Manual - Page 11
    into the AC wall outlet. Quick start guide ■ For further connections • Using the other kind of speaker combinations ☞ P. 11 • Connecting a video monitor and DVD player ☞ P. 15 • Connecting a cable TV/satellite tuner and DVD recorder ☞ P. 15 • Connecting to the COMPONENT VIDEO jacks ☞ P. 16 • Using
  • Yamaha HTR-6030 | Owner's Manual - Page 12
    guide Step 3: Turn on the power and press SCENE 1 button Check the type of the connected speakers. If the speakers are 6 ohm speakers, set "SP you change the input source or sound field program, the SCENE mode is the "TV Viewing" template, you must connect a cable TV or satellite tuner to this unit
  • Yamaha HTR-6030 | Owner's Manual - Page 13
    , orient the connected AM loop antenna receive infrared signals from the remote control. ■ Adjusting the parameters of this unit • Optimizing the speaker parameters for your listening room (BASIC SETUP) ☞ P. 21 • Manually adjusting various parameters of this unit ☞ P. 43 • Setting the remote control
  • Yamaha HTR-6030 | Owner's Manual - Page 14
    Connections 1 2 3 4 5 XM COMPONENT VIDEO DVD DTV/CBL DVR MONITOR OUT PR DIGITAL INPUT PB OPTICAL Y CD 3 DTV/ CBL 2 MULTI CH INPUT FRONT SURROUND CENTER L VIDEO DVD DTV/CBL IN DVR OUT MONITOR OUT DVD DTV/CBL L AUDIO IN DVR OUT CD DVD 1 R COAXIAL R SUBWOOFER ANTENNA
  • Yamaha HTR-6030 | Owner's Manual - Page 15
    , are obtained with the full system. Surround left and right speakers (SL and SR) The surround speakers are used for effect and surround sounds. Subwoofer (SW) The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is effective not only for
  • Yamaha HTR-6030 | Owner's Manual - Page 16
    GND FM 75 SPEAKERS SURROUND CENTER FRONT B R L R L IN MD/ OUT (PLAY) CD-R (REC) OUTPUT SUB WOOFER R FRONT A L (U.S.A. model) Subwoofer Right Left Front speakers (A) ■ Before connecting to the SPEAKERS terminal A speaker cord is actually a pair of insulated cables running side by side
  • Yamaha HTR-6030 | Owner's Manual - Page 17
    on, an the advanced setup menu appears in the front panel display. 3 Press APROGRAM l / h repeatedly to select "SP IMP.". The following display appears in the front panel display. Banana plug SP IMP.- 8 MIN ■ Connecting to the FRONT B, CENTER, and SURROUND terminals 4 Press BSTRAIGHT repeatedly
  • Yamaha HTR-6030 | Owner's Manual - Page 18
    transmitted via left and right analog audio cables. Connect red plugs to the right jacks and white plugs to the left jacks. DIGITAL AUDIO COAXIAL jacks For digital audio signals transmitted via coaxial digital audio cables. DIGITAL AUDIO OPTICAL jacks For digital audio signals transmitted via
  • Yamaha HTR-6030 | Owner's Manual - Page 19
    from the AC wall outlets. ■ Connecting a video monitor and a DVD player ■ Connecting a cable TV/satellite tuner and a DVD recorder XM COMPONENT VIDEO DVD DTV/CBL DVR MONITOR OUT PR DIGITAL INPUT PB OPTICAL CD 3 Y DTV/ CBL 2 MULTI CH INPUT FRONT SURROUND CENTER L VIDEO DVD DTV/CBL
  • Yamaha HTR-6030 | Owner's Manual - Page 20
    Video out Video in Y PB PR Y PB PR COMPONENT VIDEO DVD DTV/CBL DVR MONITOR OUT PR PB Y MULTI CH INPUT FRONT SURROUND CENTER L R SUBWOOFER VOLUME STANDBY /ON PHONES SILENT CINEMA SPEAKERS A/B/OFF EDIT SEARCH MODE PRESET/TUNING FM/AM CATEGORY A/B/C/D/E 1 l PRESET/TUNING/CH h SCENE
  • Yamaha HTR-6030 | Owner's Manual - Page 21
    , and you cannot select sound field programs. • This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that you connect a 5.1-channel speaker system before using this feature. Front out Surround out Subwoofer out Center out English
  • Yamaha HTR-6030 | Owner's Manual - Page 22
    a 4 to 5-second delay before this unit can reproduce sound. ■ Set this unit to the standby mode Press 1STANDBY/ON (or MSTANDBY) to set this unit to the standby mode. In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. 18 En
  • Yamaha HTR-6030 | Owner's Manual - Page 23
    33). 4 SILENT CINEMA indicator Lights up when headphones are connected and a sound field program is selected (see page 33). 5 Input Code Modulation) digital audio signals. 0 Headphones indicator Lights up when headphones are connected (see page 28). A SP A B indicators Light up according to the set
  • Yamaha HTR-6030 | Owner's Manual - Page 24
    at the component you want to operate. y To set the remote control codes for other components, see page 54. Notes • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: - places of
  • Yamaha HTR-6030 | Owner's Manual - Page 25
    use the detailed parameters in "SOUND MENU" (see page 45). • Altering any parameters in "BASIC SETUP" resets all parameters manually adjusted in "SOUND MENU" (see page 45). • Initial settings are indicated in bold under each parameter. • Press HRETURN on the remote control to return to the previous
  • Yamaha HTR-6030 | Owner's Manual - Page 26
    " to adjust the balance between the surround left and surround right speakers. • Select "SW" to adjust the balance between the front left speaker and the subwoofer. Note The available speaker channels differ depending on the setting of the speakers. 12 Press PMENU to exit from "BASIC SETUP". 22 En
  • Yamaha HTR-6030 | Owner's Manual - Page 27
    operation in these steps, this procedure is automatically canceled. • Once the desired SCENE templates are assigned to the corresponding SCENE buttons, you may need to set the input source of the SCENE template on the remote control. See page 51 for details. English 1 Flashes DVD Viewing 23 En
  • Yamaha HTR-6030 | Owner's Manual - Page 28
    CD Music Listening Radio Listening 4 XM Listening TV Viewing 3 TV Sports Viewing Game Playing Note * To enjoy XM Satellite Radio programs, you need to connect the XM Mini-Tuner Dock (sold separately) to this unit (see page 37). y You can create your original SCENE templates by editing the
  • Yamaha HTR-6030 | Owner's Manual - Page 29
    Listening Select this SCENE template when you play back music discs on your DVD player. DVD 2ch Stereo Disc Listening (SCENE 2 as the default setting) Select this SCENE template when you play back music sources as the back ground music on your DVD player. DVD 5ch Stereo CD Listening Select
  • Yamaha HTR-6030 | Owner's Manual - Page 30
    sound field programs or STRAIGHT mode • The night listening mode setting (see page 28) − SYSTEM: Keeps the current night listening mode. − CINEMA: Sets the night listening mode to the CINEMA mode. − MUSIC: Sets may need to set the input source of the SCENE template on the remote control. See page 51
  • Yamaha HTR-6030 | Owner's Manual - Page 31
    may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD instructions. • See page 37 for details about XM Satellite Radio tuning instructions. Movie Dramatic Currently selected surround field program Notes • Choose a sound
  • Yamaha HTR-6030 | Owner's Manual - Page 32
    that "MULTI CH" appears in the front panel display. y Use "MULTI CH SET" menu in "INPUT MENU" to set the parameter for MULTI CH INPUT (see page 49). Notes • Sound field programs mode cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source. • When
  • Yamaha HTR-6030 | Owner's Manual - Page 33
    are connected to the PHONES jack. • The night listening modes may vary in effectiveness depending on the input source and surround sound settings you Center speaker SUR.L Surround left speaker SUR.R Surround right speaker SWFR Subwoofer y Once you press FLEVEL on the remote control, you can
  • Yamaha HTR-6030 | Owner's Manual - Page 34
    remote control. "BASIC SETUP" appears in the front panel display. ;BASIC SETUP signal (front/surround/LFE). The set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. y • To cancel the sleep timer, press OSLEEP on the remote control
  • Yamaha HTR-6030 | Owner's Manual - Page 35
    is automatically set to the "STRAIGHT" mode (see page 33). y • Choose a sound field program based on your listening preference, not merely on the name of the program itself. • You can select "Music Enh. 2ch" and "Music Enh. 5ch" by pressing T ENHANCER on the remote control repeatedly. Sound field
  • Yamaha HTR-6030 | Owner's Manual - Page 36
    to the surround speakers as well as the front speakers for a wraparound effect. Choices: OFF, ON Dimension DIMENSION Function: Gradually adjusts the sound field either towards the front or towards the rear. Control range: -3 (towards the rear) to +3 (towards the front), initial setting is
  • Yamaha HTR-6030 | Owner's Manual - Page 37
    not activate even when "SUR. LR" is set to "NONE" (see page 45) in the following cases: - when "5ch Stereo" (see page 31) is selected. - when headphones are connected to the PHONES jack. Sound field programs ■ Enjoying multi-channel sources and sound field programs with headphones (SILENT CINEMA
  • Yamaha HTR-6030 | Owner's Manual - Page 38
    are strong and there is no interference. If the signal received from the station you want to select is weak, tune into it manually. 1 Press DINPUT l / h repeatedly so that "TUNER" is displayed in the front panel display. Note Manually tuning into an FM station automatically switches the tuner to
  • Yamaha HTR-6030 | Owner's Manual - Page 39
    manually. See page 34 for tuning instructions. 2 Press 6MEMORY. The MEMORY indicator flashes in the front panel display for approximately 10 seconds. 3 Press 4A/B/C/D/E and 5PRESET/ TUNING/CH l / h repeatedly to select a preset station group (A1 to E8) while the MEMORY indicator is flashing. Check
  • Yamaha HTR-6030 | Owner's Manual - Page 40
    and frequency. E1:FM 87.50MHz y You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons on the remote control. Exchanging preset stations You can exchange the assignments of two preset stations with each other. The example below describes the procedure to
  • Yamaha HTR-6030 | Owner's Manual - Page 41
    surround sound experience. Connecting the XM Mini-Tuner Dock Connect XM Mini-Tuner and XM Dock (sold separately) to the XM jack on the rear panel of this unit. For details, see the operating instructions owners. connected XM Mini-Tuner so that a value of 60% or more is displayed. Note If "CHECK
  • Yamaha HTR-6030 | Owner's Manual - Page 42
    connected the XM Dock to your XM Ready® home audio system, and installed the antenna, you are ready to subscribe and begin receiving Radio service in Surround decoder to enjoy the XM HD surround sound content of the XM Satellite Radio broadcasts in multi-channels (see page 32). • You can set
  • Yamaha HTR-6030 | Owner's Manual - Page 43
    preset channel number directly by pressing the numeric buttons (1 to 8) on the remote control. ■ Direct Number Access mode 2 Press 5PRESET/TUNING/CH l / h mode, you must preset XM Satellite Radio channels. For details, see "Setting XM Satellite Radio preset channels" on page 40. y All preset
  • Yamaha HTR-6030 | Owner's Manual - Page 44
    channel easily by selecting the preset channel group and number as described in "Preset Search mode" on page 39. 1 Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes. See "Basic XM Satellite Radio operations" on page 38 for details. 2 Press
  • Yamaha HTR-6030 | Owner's Manual - Page 45
    "XM Satellite Radio (U.S.A. and Canada models only)" section in "Troubleshooting" on page 59 for appropriate remedies. ■ Displaying the XM Satellite display can indicate up to 14 alphanumeric characters at once. You can set whether to display the XM Satellite Radio information in the front panel
  • Yamaha HTR-6030 | Owner's Manual - Page 46
    instructions for those components. Notes • When this unit is set to the standby mode, you cannot record between other components connected to this unit. • The settings of TONE CONTROL (see page 29) and VOLUME settings, speaker levels (see page 29) and the sound sound from other components. • Check
  • Yamaha HTR-6030 | Owner's Manual - Page 47
    adjust speaker and system parameters (see page 21). ■ Manual setup MANUAL SETUP Use this feature to manually adjust speaker and system parameters. Sound menu 1 SOUND MENU Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or compensate
  • Yamaha HTR-6030 | Owner's Manual - Page 48
    this feature to check audio signal information (see page 30). Using set menu Use the remote control to access and adjust each parameter. y You can change the set menu parameters while this unit is reproducing sound. 1 Press DAMP and then press PMENU on the remote control. "BASIC SETUP" appears in
  • Yamaha HTR-6030 | Owner's Manual - Page 49
    main zone. • Select "ZONE B" if the speakers connected to the FRONT B terminals are set in another zone. If FRONT A is turned off and FRONT B is turned on, all the speakers including the subwoofer in the main zone are muted and this unit outputs sound at the FRONT B terminals only. Notes • If you
  • Yamaha HTR-6030 | Owner's Manual - Page 50
    feature to manually adjust the output level of each speaker. Control range: -10 to +10 dB Control step: 1 dB Initial setting: 0 dB SP LEVEL FL FR C SL SR SWFR Adjusted speaker Front left speaker Front right speaker Center speaker Surround left speaker Surround right speaker Subwoofer Note The
  • Yamaha HTR-6030 | Owner's Manual - Page 51
    24.00 m (1.0 to 80.0 ft) Control step: 0.10 m (0.5 ft) Initial setting: 3.00 m (10.0 ft) SP DISTANCE FRONT L FRONT R CENTER SUR. L SUR. R SWFR Adjusted speaker Front left speaker Front right speaker Center speaker Surround left speaker Surround right speaker Subwoofer Note The available speaker
  • Yamaha HTR-6030 | Owner's Manual - Page 52
    effectively connect more components. Once the input jacks are reassigned, you can select the corresponding component by using DINPUT l / h (or the input selector buttons (C) on the remote control). For COAXIAL INPUT jacks 1 IN (1) Choices: (1) CD, MD/CD-R, DVD, DTV/CBL, V-AUX, DVR For OPTICAL INPUT
  • Yamaha HTR-6030 | Owner's Manual - Page 53
    the remote control connected input source. DTS decoder prioritize setting Choices: AUTO, DTS • Select "AUTO" if you want this unit to automatically detect input signal types and select the appropriate input mode. • Select "DTS" when you play back a DTS-CD. ■ Multi channel input setup E)MULTI CH SET
  • Yamaha HTR-6030 | Owner's Manual - Page 54
    menu 3 OPTION MENU Use this menu to adjust the optional system parameters. ■ Display settings A)DISPLAY SET Dimmer DIMMER Use this feature to adjust the brightness of the front panel display. Control range: -4 to 0 Control step: 1 • Press Gl to make the front panel display dimmer. • Press Gh to make
  • Yamaha HTR-6030 | Owner's Manual - Page 55
    Remote control features Remote control features In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code for each input
  • Yamaha HTR-6030 | Owner's Manual - Page 56
    a TV, or other components ■ Controlling this unit Press DAMP to control this unit. ■ Controlling a TV Press CDTV/CBL to control your TV. To control your TV, you must set the appropriate remote control code for DTV/CBL (see page 54). AMP *2 POWER POWER STANDBY POWER TV AV MULTI CH IN AUDIO SEL
  • Yamaha HTR-6030 | Owner's Manual - Page 57
    one of the input selector buttons (C) or to control other components. You must set the appropriate remote control code for each input source in advance (see page 54). The following table shows the function of each control button used to control other components assigned to each input selector button
  • Yamaha HTR-6030 | Owner's Manual - Page 58
    within 30 seconds in step 2, the setup process is canceled. If this happens, repeat the setup procedure. Note You may not be able to operate your Yamaha component even if a Yamaha remote control code is preset as listed above. In this case, try setting another Yamaha remote control code. 54 En
  • Yamaha HTR-6030 | Owner's Manual - Page 59
    operations can be made while you are using the advanced setup menu. • The advanced setup menu is only available in the front panel display. 1 Press 1STANDBY/ON on the front panel to set this unit to the standby mode. 2 Press and hold 0TONE CONTROL and then press 1STANDBY/ON to turn on this unit
  • Yamaha HTR-6030 | Owner's Manual - Page 60
    Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service
  • Yamaha HTR-6030 | Owner's Manual - Page 61
    again. The sound is muted. Press NMUTE or QVOLUME +/- on the remote control to resume audio output. Incorrect cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Incorrect settings in "SP LEVEL". Adjust the "SP LEVEL" settings. When playing
  • Yamaha HTR-6030 | Owner's Manual - Page 62
    jack select is set to "ANALOG". Make an appropriate setting following the operating instructions for your component. Set Audio input jack select to "AUTO". A humming sound is Incorrect cable connections. heard. Connect the audio cables firmly. If the problem persists, the cables may be defective
  • Yamaha HTR-6030 | Owner's Manual - Page 63
    ■ Tuner Troubleshooting Problem Cause Remedy FM stereo reception is noisy. There is distortion, and and other electrical equipment. A TV set is being used nearby. Check the antenna connections. Try using a high-quality directional FM antenna. Use the manual tuning method. Adjust the antenna
  • Yamaha HTR-6030 | Owner's Manual - Page 64
    all batteries. Set the remote control code correctly using "List of remote control codes" at the end of this manual. Try setting another code for the same manufacturer using "List of remote control codes" at the end of this manual. See page 20 - 3 54 54 ■ Resetting the system Use this feature
  • Yamaha HTR-6030 | Owner's Manual - Page 65
    gaining popularity in movie theaters around the world. Digital Theater Systems Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 5.1-channel
  • Yamaha HTR-6030 | Owner's Manual - Page 66
    Dolby Digital and DTS systems to provide the audiovisual experience of movie theater in the listening room of your own home. SILENT CINEMA Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field program so that
  • Yamaha HTR-6030 | Owner's Manual - Page 67
    dB or more • Tone Control (Front L/R) BASS Boost/Cut SUBWOOFER OUTPUT (2ch Stereo and FRONT SP: SMALL 4 V/1.2 kΩ • Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F. (Front, Center, Surround 12 dB/oct. L.P.F. (Subwoofer Specifications are subject to change without notice
  • Yamaha HTR-6030 | Owner's Manual - Page 68
    source information 30 Installing batteries in the remote control 3 ■J Jazz 31 ■L LFE indicator 19 LFE/Bass out 46 Listening to unprocessed input signals 33 Low-frequency effect level 47 ■M Manual preset tuning 35 MANUAL SETUP 43 Manual setup 43 Manual tuning 34 MAX VOL 48 Maximum volume
  • Yamaha HTR-6030 | Owner's Manual - Page 69
    remote control 51 Setting remote control codes 54 Setting the speaker impedance 13 Setting XM Satellite Radio preset ....... 40 SILENT CINEMA 33 SILENT CINEMA indicator 19 SLEEP indicator 19 Sleep timer 30 Sound field programs 31 Sound menu 43 SP A B indicators 19 SP D.R 47 SP IMP 55 SP
  • Yamaha HTR-6030 | Owner's Manual - Page 70
    CINEMA SPEAKERS A/B/OFF EDIT SEARCH MODE PRESET/TUNING FM/AM CATEGORY A/B/C/D/E 1 l PRESET/TUNING/CH h SCENE 2 3 4 MEMORY DISPLAY TUNING AUTO/MAN'L TONE CONTROL l PROGRAM h STRAIGHT NIGHT l INPUT h AUDIO SELECT EFFECT VIDEO VIDEO AUX L AUDIO R PORTABLE 9 0 A BC D EF i
  • Yamaha HTR-6030 | Owner's Manual - Page 71
    ■ Remote control X A B C D E F G H POWER POWER STANDBY POWER TV AV MULTI CH IN AUDIO SEL SLEEP MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR TV CH V-AUX XM AMP TV INPUT TV MUTE TV
  • Yamaha HTR-6030 | Owner's Manual - Page 72
    List of remote control codes TV ACER 0093 ACME 0207 ACURA 0208 ADA 0255 ADC 0206 ADMIRAL 0058, 0205, 0206, 0210, 0211 ADYSON 0200, 0207 AGASHI 0200 AGAZI 0206 AGB
  • Yamaha HTR-6030 | Owner's Manual - Page 73
    0061, 0104, 0112, 0113, 0125, 0205, 0213 MIVAR 0200, 0201, 0202, 0203, 0204, 0207 MONTGOMERY WARD 0058 MTC 0060, 0061, 0128, 0200 MULTI SYSTEM 0217 MULTITECH 0062, 0127, 0128, 0200, 0207, 0208, 0210, 0214, 0215, 0217 MURPHY 0200, 0207 NAD 0061 NAONIS 0210 NEC 0026, 0053, 0060
  • Yamaha HTR-6030 | Owner's Manual - Page 74
    0067, 0085, 0086, 0174, 0196, 0199, 0208, 0219, 0234 SOUND & VISION 0209, 0218 SOUNDESIGN 0060, 0061, 0062 SOUNDWAVE 0213, 0217 SSS 0217 WESTON 0215 WHITE WESTINGHOUSE 0008, 0200, 0207, 0217 WINCOM 0055, 0056 YAMAHA YAMISHI YOKO YORX ZANUSSI ZENITH 0000, 0001, 0002, 0003, 0005, 0060,
  • Yamaha HTR-6030 | Owner's Manual - Page 75
    , 1010, 1039, 1042, 1043, 1046, 1049 HUGHES NETWORK SYSTEMS 1010 HYPSON 1044, 1050 IMPERIAL 1042 INNO HIT 1046, 1050 1010, 1014 WELTBLICK 1045 WHITE WESTINGHOUSE 1013 XR-1000 1004, 1005, 1006 YAMAHA 1000, 1001, 1007 YAMISHI 1050 YOKAN 1050 YOKO 1045, 1050 ZENITH 1013,
  • Yamaha HTR-6030 | Owner's Manual - Page 76
    2074 HE 2078 HITACHI 2032, 2072 HOME ELECTRONICS 2078 INNOVATION 2072 IRRADIO 2134 JDB APEX JVC LG PANASONIC PHILIPS PIONEER RCA SONY TOSHIBA YAMAHA YUKAI 2024 2070 2071 2020, 2065, 2066, , 2131, 2132 STACK 9 2132 SYSTEMAX 2132 TAGAR SYSTEMS 2132 TIVO 2116, 2121, 2122, 2123, 2130,
  • Yamaha HTR-6030 | Owner's Manual - Page 77
    to those in the Owner's Manual. ■ Front panel U HTR-6030 1 2 34 5 67 8 VOLUME STANDBY /ON PHONES SILENT CINEMA SPEAKERS A/B/OFF EDIT SEARCH MODE PRESET/TUNING FM/AM CATEGORY A/B/C/D/E 1 l PRESET/TUNING/CH h SCENE 2 3 4 MEMORY DISPLAY TUNING AUTO/MAN'L TONE CONTROL l PROGRAM
  • Yamaha HTR-6030 | Owner's Manual - Page 78
    ■ Remote control X A B C D E F G H POWER POWER STANDBY POWER TV AV MULTI CH IN AUDIO SEL SLEEP MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR TV CH V-AUX XM AMP TV INPUT TV MUTE TV
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
HTR-6030
AV Receiver
OWNER’S MANUAL
U