Yamaha HTR 6230 Owner's Manual - Page 23

INTRODUCTION PREPARATION BASIC OPERATION ADVANCED OPERATION Using audio features Use the following features to adjust the audio output or speaker level. ■ Muting the audio output Press eMUTE on the remote control to mute the audio output. Press eMUTE again to resume the audio output. y • You can also rotate PVOLUME (or press mVOLUME +/-) to resume the audio output. • You can configure the muting level by using "MUTE TYP." in "SOUND MENU" (see page 34). • The MUTE indicator flashes on the front panel display when the audio output is muted and disappears from the front panel display when the audio output is resumed. ■ Adjusting the tonal quality Use this feature to adjust the balance of bass and treble for the front left and right speaker channels. Press KTONE CONTROL repeatedly to select "BASS" or "TREBLE" and then press LPROGRAM l / h to adjust the corresponding frequency response level. Control range: -10 to +10 dB Each choice is defined as follows. Choice BASS TREBLE Function Adjusts the low-frequency response. Adjusts the high-frequency response. Notes • Speaker and headphone adjustments are stored independently. • If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. • This does not affect recorded material. ■ Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. Note • This operation will override the level adjustment made in "SP LEVEL" (see page 33). 1 Press hAMP and then press jBAND LEVEL TITLE repeatedly to select the speaker you want to adjust. Choice FRONT L FRONT R CENTER SWFR SUR.L SUR.R Description Front left speaker Front right speaker Center speaker Subwoofer Surround left speaker Surround right speaker Playback y • Once you press jBAND LEVEL TITLE on the remote control, you can also select the speaker by pressing lk / n. • The available speaker channels differ depending on the speaker settings. 2 Press ll / h on the remote control (or press FPRESET/TUNING l / h) to adjust the speaker output level. Control range: -10.0 dB to +10.0 dB Using optional features Use the following features to utilize various useful functions equipped on this unit. ■ Using your headphones Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel. y • When you select a sound field program, SILENT CINEMA mode is automatically activated (see page 26). Notes • When you connect headphones, no signals are output at the speaker terminals. • All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels. ■ Selecting the night listening mode The night listening modes are designed to improve listenability at lower volumes or at night. 1 Press ONIGHT (or press hAMP and then uNIGHT) repeatedly to select "NIGHT:CINEMA" or "NIGHT:MUSIC." Each choice is defined as follows. Choice Function NIGHT:CINEMA NIGHT:MUSIC Narrows the dynamic range of film soundtracks and makes dialog easier to hear at lower volumes. Preserves ease-of-listening for all sounds. NIGHT OFF Disables this feature. y • When a night listening mode is selected, the NIGHT indicator lights up on the front panel display. 2 Press ll / h to adjust the effect level while "NIGHT:CINEMA" or "NIGHT:MUSIC" is displayed on the front panel display. Each choice is defined as follows. Choice MIN MID* MAX Function Slightly lowers the effect level. Moderately lowers the effect level. Considerably lowers the effect level. ADDITIONAL INFORMATION APPENDIX English 19 En