Yamaha MOX8 Owner's Manual - Page 63
No sound from the A/D INPUT jack, Playback continues without stopping., Distorted sound.
UPC - 086792950907
View all Yamaha MOX8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Appendix When playing the keyboard in the Performance/Song/Pattern mode produces no sound, has a Voice been properly assigned to each Part? [PERFORM] [F2] VOICE [SONG]/[PATTERN] [MIXING] [F2] VOICE When Song/Pattern playback produces no sound, are the output channel of each Track in the play mode and the receive channel of each Part in the Mixing mode set appropriately? [SONG]/[PATTERN] [F3] TRACK [SONG]/[PATTERN] [MIXING] [EDIT] Part selection [F1] VOICE [SF2] MODE "ReceiveCh" When Song/Pattern playback produces no sound, is the Velocity Offset setting of the Groove appropriate? [SONG]/[PATTERN] [F2] GROOVE "VELO OFST" No sound from the A/D INPUT jack Is the switch of the microphone turned on? Check the microphone type. Make sure to use a dynamic microphone. Is the cable between the microphone or audio equipment and this instrument properly connected? Is the A/D INPUT [GAIN] knob turned fully counter-clockwise (to the minimum)? Is the A/D INPUT [ON/OFF] button turned on? Check whether or not the connection status of the A/D INPUT [L]/[R] matches the "Mono/Stereo" parameter. [VOICE] [UTILITY] [F3] VCE A/D "Mono/Stereo" [PERFORM] [EDIT] [COMMON] [F5] A/D IN "Mono/Stereo" [SONG]/[PATTERN] [MIXING] [EDIT] [COMMON] [F5] A/D IN "Mono/Stereo" Check whether or not the "Mic/Line" parameter is set to the appropriate value. When the output level of the connected equipment (such as a microphone, guitar, bass) is low, set this parameter to "mic." When the output level of the connected equipment (such as a synthesizer keyboard, CD player) is high, set this parameter to "line." [UTILITY] [F1] GENERAL [SF6] OTHER Press [