Yamaha MW10C MW8CX/MW10C Owners Manual

Yamaha MW10C Manual

Yamaha MW10C manual content summary:

  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 1
    English Deutsch Français Español Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones EN DE FR ES
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 2
    Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : USB Mixing Studio Model Name : MW8CX/MW10C instructions found in the users manual problem by using power Yamaha Corporation of America, Electronic Service
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 3
    Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Power supply/Power /MW10C Owner's Manual 3
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 4
    Yamaha service personnel about replacing defective components. The MW mixer may heat up by as much as 15 to 20°C while the power supplied software and operating system requirements. The illustrations and LCD screens as shown in this owner's manual are for instructional
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 5
    a Yamaha MW8CX/MW10C USB Mixing Studio. The MW8CX/MW10C includes an audio mixer equipped with a USB interface for digital audio data transfer, and Cubase AI DAW (Digital Audio Workstation) software for Windows® and Macintosh® computer operating systems. With the MW8CX/MW10C USB Mixing Studio and
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 6
    , etc.) and ending with the power amplifier or powered speakers. Example : Instruments, microphones, and CD players first, then the mixer, and finally the power amplifier or powered speakers. When turning off the power to the system, reverse the order described above. 6 MW8CX/MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 7
    the MW mixer on or off, and between connecting or disconnecting the USB cable. When connecting or disconnecting the USB cable be sure to turn the 2TR IN/USB control CAUTION all the way down. NOTE Disconnect the USB cable when using the MW mixer without the computer. MW8CX/MW10C Owner's Manual 7
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 8
    "Troubleshooting" on page 22. • The first time you connect to the computer's USB connector, or change the connection to a different USB port, a driver installation display may appear after turning the power to the MW mixer and red for right audio channel, for example. 8 MW8CX/MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 9
    Mixer Basics Quick Guide on the stereo channels-7/8 (MW8CX), or 7/8 and 9/10 (MW10C)). 3 Raise the STEREO Master control to the "▼" position mixer's compressors and 3-band equalizers make it easy to shape the tone of independent channels to achieve the best possible mix. MW10C Owner's Manual 9
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 10
    the window. Select [USB Audio CODEC] in the [ASIO Driver] field on the right side of the window. A dialog box will appear asking "Do you want to switch the ASIO driver?". Click [Switch]. A new project is created. NOTE Recorded Cubase AI data is stored as a "Project." 10 MW8CX/MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 11
    DirectX Full Duplex Driver] (Windows), [USB Audio CODEC] (Mac) in the [Devices] field on the left side of the Device Setup window, and click [Control Panel] on the right side of the window. Mixer Basics Quick Guide Windows: The ASIO Direct Sound Full Duplex Setup dialog window will be displayed
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 12
    Mixer Basics Quick Guide Preparing to Record 1 Click in the track the point at which you want to start recording via the ruler at the top of the window for the project. Click the black area of the ruler to move the project cursor (the Transport panel [Start] button. 12 MW8CX/MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 13
    Basics Quick Guide 4 Select [Mixer] from the [Devices] menu to open the Mixer window. The overall playback level will be displayed via the master section bus level meter on the right side of the mixer window, and the channel level will be displayed via the channel strip level meter. NOTE The
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 14
    Mixer Basics Quick Guide of the stage. Judicious panning can also help to create cleanersounding mixes by spreading the instruments out across the sound stage so that back using the Windows Media Player, or iTunes on a Mac computer. NOTE For further details refer to the pdf manual provided with the
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 15
    Reference Setup Reference Guitar Bass DI Microphone Synthesizer Powered Speakers CD Player Recorder Effect Processor (exciter) Foot Switch (YAMAHA FC5) Headphones Effect Processor Powered Monitor Speakers Personal Computer MW8CX MW8CX/MW10C Owner's Manual 15
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 16
    MW10C feature in brackets: MW8CX (MW10C). Channel Control Section Channels 1 and 2 (Monaural) Channels 3/4 and 5/6 (Stereo) Channels 7/8 (7/8 and 9/10 10)) These are unbalanced phone-jack stereo line inputs. 4 LINE Input Jacks (CH 7/8, (CHs 7/8, 9/10 should not be a problem when connecting to an
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 17
    also affected by the LEVEL control C. On stereo channels (CHs 3/4 to 7/8 (CHs 3/4 to 9/10)) the signals from the L (odd) and R (even) channels are mixed and then sent to the EFFECT (AUX) bus. B PAN Control (CHs 1, 2) PAN/BAL all the way down to minimize noise. MW8CX/MW10C Owner's Manual 17
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 18
    mixer. NOTE Select where you want to send the signal using the 2TR IN/USB switch B, and adjust the signal level using the 2TR IN/USB V Switch This switch toggles phantom power on and off. When the switch is on the mixer supplies +48V phantom power to all channels that have XLR MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 19
    supply a signal to the RETURN L (MONO) jack only, the mixer sends the same signal to both the L and R Stereo buses. 0 POWER Indicator This indicator lights when the mixer's power recorded separately. MONITOR MIX Signal Flow 2TR IN/ USB 2TR IN/USB control Playback signal MW10C Owner's Manual 19
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 20
    lights orange when on. An optional YAMAHA FC5 foot switch (sold separately) 20 MW8CX/MW10C Owner's Manual 1 POWER Switch Use this switch to turn the mixer's power ON or supplied power adaptor to this connector (see page 6). 3 USB Connector Connects to the computer via the included cable. The USB
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 21
    applications. 10 VOCAL mixer right-side up, and mount it onto your microphone stand. 3 Loosen the angle adjustment wingnut (q), adjust the mixer's angle as desired (w), and then tighten the wingnut securely (e). For more information, refer to the BMS-10A Owner's Manual. MW8CX/MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 22
    MW mixer directly to a USB port on the computer. If the computer has multiple USB ports, try a different USB port. ❑ Are you using other USB devices at the same time? If so, try removing the other device(s) and connecting only the Yamaha USB device. The Input ports are not shown (Windows 7/Vista
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 23
    Sound" icon to open the "Sound" dialog window. 2. Click the "Playback" tab, right-click the "USB Audio CODEC" icon and select "Proper- ties". in the "Sound scheme." Mac: 1. Select [System Preferences ...] from the Apple menu and then select "Sound" to open the "Sound" dialog window. 2. Click the "
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 24
    sometimes improve audio performance. In some cases it might be necessary to update your hard disk controller, device drivers, or BIOS. Refer to your computer's support center or support page on the web for more information. ❑ Try adding memory. Adding more RAM memory can significantly increase your
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 25
    dB maximum PEAK Indicator Internal Digital Effect (Only MW8CX) LED Level Meter Power Supply Adaptor Power Consumption Dimensions (W x H x D) Net Weight Input/Output: 44.1/48 kHz CHs 1-5/6, 80 Hz, 12 dB/oct CHs 1-5/6 HIGH: 10 kHz (shelving) MID: 2.5 kHz (peaking) LOW: 100 Hz (shelving) CH 7/8 (CHs
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 26
    dBu (24.5V) +10 dBu (2.45 V) +20 dBu (7.75 V) +24 dBu (12.3 V) +10 dBV (3.16 V) Connector Speci MW10C feature in brackets: MW8CX (MW10C) ■ Digital Input/Output Specifications Connector USB Format USB Audio 1.1 Data Length 16 bit Connector Specification USB B type 92 MW8CX/MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 27
    are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. MW8CX/MW10C Owner's Manual 93
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 28
    SEND (MW8CX) AUX SEND (MW10C) [+4dBu] FOOT SW EFFECT ON/OFF PROGRAM (1-16) PARAMETER ON YE LO [-6dBu] DIGITAL EFFECT (DSP) RO EFFECT RETURN IN only MW8CX MONITOR MIX LPF [0dBu] LPF LPF [0dBu] LPF D- LIN USB D+ RIN AUDIO GND LO RO (Bus Powered) Vbus USB +30dBu +20dBu +10dBu 0dBu
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 29
    Yamaha does not offer technical support for the DAW software in the accessory disk. About the DAW software in the accessory disk The accessory disk contains DAW software both for Windows and Mac menu also includes the PDF manual and other information on the software.) MW8CX/MW10C Owner's Manual 95
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 30
    Beachten Sie, dass Yamaha keine technische Unterst sowohl für Windows als auch für Mac. HINWEIS • Achten Sie darauf, die DAW-Software im „Administrator"-Account zu installieren. • Um den fortwährenden Betrieb der DAW-Software auf der Zubehör-Disk einschließlich Support MW10C Owner's Manual
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 31
    écrit du fabricant. • Yamaha n'offre aucune garantie quant à Windows et Mac. NOTE • Prenez soin d'installer le logiciel DAW avec le compte « Administrateur ». • Pour bénéficier d'un usage ininterrompu des logiciels DAW contenus sur le disque accessoire ainsi que du support MW10C Owner's Manual 97
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 32
    en el reproductor. • Tenga presente que Yamaha no ofrece asistencia técnica para el software DAW incluido en el disco complementario. Acerca del software DAW incluido en el disco complementario El disco complementario contiene software DAW para Windows y Mac. NOTA • Asegúrese de que instala
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 33
    3-9693-5111 NEW ZEALAND Music Works LTD P.O.BOX 6246 Wellesley, Auckland 4680, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation, Asia-Pacific Sales & Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2313 HEAD OFFICE
  • Yamaha MW10C | MW8CX/MW10C Owners Manual - Page 34
    Yamaha Web Site (English only) http://www.yamahasynth.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G., Pro Audio Division © 2007-2011 Yamaha Corporation 111POGR*.*-01D0 ZA68570
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

ES
FR
DE
EN
English
Deutsch
Français
Español
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones