Yamaha MX-D1 Owners Manual

Yamaha MX-D1 - Amplifier Manual

Get Yamaha MX-D1 - Amplifier PDF manuals and user guides View all Yamaha MX-D1 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha MX-D1 manual content summary:

  • Yamaha MX-D1 | Owners Manual - Page 1
    U STEREO POWER AMPLIFIER OWNER'S MANUAL
  • Yamaha MX-D1 | Owners Manual - Page 2
    operating and maintenance (servicing) instructions in the literature Manual in a safe place for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions of the obsolete outlet. 10 Protect the power cord from being walked on or pinched
  • Yamaha MX-D1 | Owners Manual - Page 3
    1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting
  • Yamaha MX-D1 | Owners Manual - Page 4
    manual YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. • When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. • Be sure to read the "TROUBLESHOOTING the instructions described
  • Yamaha MX-D1 | Owners Manual - Page 5
    power, high-performance digital stereo power amp • 120 dB dynamic range • Yamaha-designed LSI chips used in the digital-modulation and power-drive circuits • Active Power ) • 100 dB channel separation • Yamaha's own high-efficiency, low-noise resonant-type switching power supply • WBT (German
  • Yamaha MX-D1 | Owners Manual - Page 6
    on handling" make the connection or to use a cable that have been manufactured in such a way that the connection can be made simply and without problem. E-2
  • Yamaha MX-D1 | Owners Manual - Page 7
    only. 8 AMP ID switch This switch is for servicing purposes only. 9 CONTROL IN jack The MX-D1 can be turned on or off via this jack. The control range is +3 to +30 volts. 0 CONTROL OUT jack When the MX-D1 is turned on, this jack outputs +12 volts. The maximum current is 15 mA. w POWER/THROUGH switch
  • Yamaha MX-D1 | Owners Manual - Page 8
    CONNECTIONS Pre-amplifier CD player with a volume control PA equipment Balanced XLR output Speaker (R) YPC-1 CD player Tape deck Tuner E-4 To AC outlet Audio output Speaker (L) etc. etc.
  • Yamaha MX-D1 | Owners Manual - Page 9
    jacks are shown below. Refer to the owner's manual of your component and verify that its output jacks /phono output jacks. When using this unbalanced connection, set the UNBAL/BAL switch to "UNBAL." Caution Note that Connecting the AC Power Cable Plug the AC power cable into the AC IN connector when all
  • Yamaha MX-D1 | Owners Manual - Page 10
    DIAGRAMS The MX-D1 is a high-power, high-performance PWM (Pulse Width Modulation) digital stereo power amp, utilizing Yamaha's latest digital power amplifier and switching power supply technologies. The following block diagrams show the amplifier and power supply circuits. Amplifier Block Diagram
  • Yamaha MX-D1 | Owners Manual - Page 11
    switching power supplies, developed by Yamaha, are used for the left and right channels. In addition, the secondary rectifier circuit has a magnetically coupled rectifier, which resolves issues normally associated with conventional SEPP (single-ended push-pull) digital amps and allows the MX-D1 to
  • Yamaha MX-D1 | Owners Manual - Page 12
    listed, set the MX-D1 to standby mode, disconnect the AC power cable from the AC outlet, and then contact the nearest Yamaha dealer. Symptom Cause Remedy Cannot turn on the MXD1? There is no sound? A hum can be heard? The output sounds unnatural, has a limited bass range, and poor stereo image
  • Yamaha MX-D1 | Owners Manual - Page 13
    Channel separation or more 100 dB (5.1 kΩ terminated, 1 kHz) Input jacks UNBALANCE Unbalanced 1.3 V/25 kΩ BALANCE Balanced XLR 1.3 V Pin 2 hot Output jacks SPEAKER Supports model AC 110/120/220/240 V, 50/60 Hz Power consumption 350 W Power consumption in st.andby mode or less 0.1 Ω Dimensions
  • Yamaha MX-D1 | Owners Manual - Page 14
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
STEREO POWER AMPLIFIER
OWNER’S MANUAL
U